Hi Yasuhiro, first and foremost thank you for taking the time to make the video and for sharing your idea/version on how to make the jigs! Most of us will have these kinds of tools in our shops as well scraps of wood, what a simple but effective way to use up the scraps. For me this video came at a good time, I have to make some Black Walnut and Purple and Yellow Heart dowels for some projects I’m working on. Thanks again for sharing, looking forward to your next video 🙏 Take care, Wayne
My favourite type of jigs, simple and easy to make and are extremely useful ... especially liked the last method of creating round tapered legs (or whatever they are used for) ... superb 👍
This is so awesome. I aint a woodworker but have ran into a bunch of times i needed a certain dowel size that a store didnt have. Now i can easily just make any size.... that is if i remember this trick 🤣
I love using dowels in my projects. This is great! My dad likes his kreg jig and screws. It works but the ascetics of a dowel is superior to a screw. Thank you, sir.
I had to make a 5/16" Maple dowel and I used the the one blade method clamped to the edge of the board over the 5/16" hole and it worked exactly as shown. Perfect
Don't use a thin bladed kataba saw for this if possible. The few teeth doing the cutting will wear VERY quickly. The example of the chisel used after that in the video is much better because the mass of the chisel can absorb the heat and the edge can be quickly resharpened.
i think the trick to consistency is to have the piece of timber remain level as it goes through. the drill moves up and down as its pushed forward varying the thicknes slightly perhaps a shelf on either side of the hole will lessen that variance but some very good ideas in there
Fantástico você é o cara, que Deus abençoe sua carreira, gênio, fico muito contente de saber que você está com tantas ideias sensacional, estou aprendendo com você thank vermat.
I can understand the use of using a "jigsaw" blade but, a normal saw? What's the risk of over heating the saw blade and ruining said saw? What about using a hacksaw blade instead? I've seen dowels made on a table saw before using a similar jig as what you did with the cordless drill. Love your work and channel. Great video, cheers :)
This is the free world. And no Russian comrades. If you don't like it, then get lost or start using the world's language. Russian doesn't mean anything anymore.
This IS Capitalism. Capitalism is an economic system based on private ownership of the means of production and their operation for profit. It includes capital accumulation, competitive markets, price systems, private property, property rights recognition, voluntary exchange, and wage labor.
With the simple methods, doesn't the dowel come out a bit too thin? First, you are cutting off a bit of the side of the hole. And second, the jigsaw blade has a kerf. Are there ways around this?
Hi Yasuhiro, first and foremost thank you for taking the time to make the video and for sharing your idea/version on how to make the jigs! Most of us will have these kinds of tools in our shops as well scraps of wood, what a simple but effective way to use up the scraps. For me this video came at a good time, I have to make some Black Walnut and Purple and Yellow Heart dowels for some projects I’m working on.
Thanks again for sharing, looking forward to your next video 🙏
Take care, Wayne
love the process, love the simplicity...wait wait hold up... its a lathe table saw? dang those are some quality dowels
My favourite type of jigs, simple and easy to make and are extremely useful ... especially liked the last method of creating round tapered legs (or whatever they are used for) ... superb 👍
Absolutely brilliant! Jigs for all sizes. Keep up the good work.
This is so awesome. I aint a woodworker but have ran into a bunch of times i needed a certain dowel size that a store didnt have. Now i can easily just make any size.... that is if i remember this trick 🤣
Always impressed by your skill and imagination! 👍🙂
This video is pure gold, it deserve a big thank$
I love using dowels in my projects. This is great! My dad likes his kreg jig and screws. It works but the ascetics of a dowel is superior to a screw. Thank you, sir.
The pinnacle of art lies in simplicity and class.❤❤❤❤
Sir, you are the one.
Thanks for share with us,you expertise and time.
that last machine is awesome, great for furniture legs
Voce é uma dádiva divina para todos que gostam da arte em madeira. Obrigado pelos videos!!!!
Awesome!!! The best ever video on dowel making.
Holy god, this guy's got dowels sorted!
the jig with the circular saw and the drill is pure genius!
Very nice thanks for sharing keep your good work up thank you
Very impressive. You have some impressive techniques
I love the circular saw lathe. Super dope.
I had to make a 5/16" Maple dowel and I used the the one blade method clamped to the edge of the board over the 5/16" hole and it worked exactly as shown. Perfect
this is badass you are badass thank you. i especially love the three blade jigsaw blade jig. awesome.
Das war sehr, sehr hilfreich. Vielen Dank dafür. I`m very impressed. 😎 👍👍👍
Parabéns !! poucos atigem este nível de sofisticação.
You are Genius. Thank You for sharing!
Don't use a thin bladed kataba saw for this if possible. The few teeth doing the cutting will wear VERY quickly. The example of the chisel used after that in the video is much better because the mass of the chisel can absorb the heat and the edge can be quickly resharpened.
True, but it is just one of many ways shown and gives you alternative ways to make eg if the saw is all you have to hand
@@Grahammon Of course sometimes options are limited. People should just be aware that some jig designs are a lot more temporary than others
Thank you man. Your the best.
It's the kind of techniques in always in need of. The perfect medicine.
拍手を送らせてください！👏👏👏
勉強させていただきました！
that is such a fantastic idea!
Wonderful idea, thank you !
So inventive! Beautiful...
Thank you!
動画を拝見してワンブレードを真似させていただきました！ まあまあの精度で出来ました。
あとはペーパーで焦げを落として穴埋めの埋木として使いました。とても参考になりました。
ありがとうございました。
Nice and simplest process
You are a wonderful woodworker Yasuhiro San! 🪚
Dopest the saw and drill!!
So smart. Thanks for sharing.
i think the trick to consistency is to have the piece of timber remain level as it goes through. the drill moves up and down as its pushed forward varying the thicknes slightly perhaps a shelf on either side of the hole will lessen that variance but some very good ideas in there
I’m always amazed with what you come up with ❤
I think my mind exploded at about the 5 min mark! =D
丸棒が必要なdiyって私はまずないんだけど、これはすごいね。使わなくても知ってるだけでもいい。
I from Indonesia....I like🎉 because simple
Amazing!!! I like your channel!!!
hola .. muy lindo video .. saludos cordial
Japanese carpentry is the finest.
Genius...pure genius!!!
Amazing skills 😎😎😎😎
You do everything very carefully. It's nice to watch.
So smart ideas
Well. I guess that covers it. Wow! Awesome! Thanks!
Amazing! Tips only a master can give.
Sei un GENIO
Thanks
Parabéns muito bom seu trabalho 👏👏👏👏
Fantástico você é o cara, que Deus abençoe sua carreira, gênio, fico muito contente de saber que você está com tantas ideias sensacional, estou aprendendo com você thank vermat.
Будем иметь ввиду, спасибо за идею!
It's a good one
Very good.
This guy is serious about his dowel rods
very interesting video🎉
Smart guy❤
I can understand the use of using a "jigsaw" blade but, a normal saw? What's the risk of over heating the saw blade and ruining said saw? What about using a hacksaw blade instead? I've seen dowels made on a table saw before using a similar jig as what you did with the cordless drill. Love your work and channel. Great video, cheers :)
I found out a way to make round material smaller by rolling it on a table saw surface. You just set the blade height to the amount you want to remove.
Einfach Klasse ,danke 💪👁️
とても良いアイデアですね‼️
９ミリの丸棒を探したのですが10ミリか8ミリの丸棒しかホームセンターに無いため参考になりました。
動画の様に試してみたいと思います。
Very goods
Спасибо за ролик👍
Good sounds
👍👌👏🤜🤛✊💪🤝. Очень классная работа.
So cool..
Потрясающе.
Уважение товарищу.
This is the free world. And no Russian comrades.
If you don't like it, then get lost or start using the world's language. Russian doesn't mean anything anymore.
mantap gan 👍
Грех не поставить лайк такому видео
Criativo parabéns gostei 👍
Наконец-то сделаю себе 3-х метровые черенки для лопаты.
Que interessante 👏👏😀
Sangat menarik 👍
Спасибо, очень интересная последняя приспособа. Вместо пилы фрезер и фиксация заготовки позволит делать многогранники.
Чтобы делать многогранники нужна делительная головка, иначе красивых многогранников вы не получите.
@@Pilot-gu3xz можно и шаблон по количеству граней на вал закрепить. И его фиксировать.
@@константинфирсов-р8м Тоже вариант, заодно использовать верхнюю грань шаблона для фиксации вала в нужном положении.
hay quá 👍
How do you keep 90 degree while pushing?
TOP!
People like you save us from angry capitalism😁. Don't stop!
This IS Capitalism.
Capitalism is an economic system based on private ownership of the means of production and their operation for profit. It includes capital accumulation, competitive markets, price systems, private property, property rights recognition, voluntary exchange, and wage labor.
@@silverstake88bro, chill out.
👍@@silverstake88
@@silverstake88he said ANGRY capitalism, not Capitalism
I do agree with you 😊
Hello, what kind of tree do you use?
What type of jig saw blade do you use, friend?
What types the jigsaw blade using in this video please, thanks
Bosch
@stanmarsh4278 Bosch is the brand
8:30-минус глаза. Вызовите врача!! Где мой фрезер!!!
ПРЕКРАСНО !!!
resolvido!
10:00-Диск F.
sugoi!!!!
How is that circular blade so thin?
With the simple methods, doesn't the dowel come out a bit too thin? First, you are cutting off a bit of the side of the hole. And second, the jigsaw blade has a kerf. Are there ways around this?
eskerrik asko!
Интересно, какой способ лучше всего по качеству и скорости изготовления? 🤔
Рекомендую приспособление с двумя лезвиями для лобзика.
@@YASUHIROTV Ооо, искренне благодарю за ответ, буду пробовать! 🤝🏻
👍👍
On the first design what blades are used?
Looks like wood jigsaw blades
👍👍😄
That's a lot of saw dust. 😅
The dowels look fantastic, though.
БЛАГОДАРЮ
Наигрался😄👍
❤