Hi plcgoods I am reviewing delta course , I don't know but I am confused at 8:20 , first for the ladder and described circuit are incorrect compared to logic table , and how y3 is off when I pressed the related pushbutton and y1 is off if we pressed the button although their ladder is the same
Hi there, The table is correct. I can answer your question, but please try to find it by watching the video carefully. Pay attention: These addresses (X0, X1, X2, X3) work based on the voltage state on their related pin, not based on their related pushbutton state. Also, during the first videos of our TIA Portal course, your problem was explained again.
Thx u for the vid , I made it with control io it's really awesome, u made learning plc very fun👍
Thanks for your compliment! glad to see you found the contents to be useful to you! keep in touch!
you are a beautiful person and your work is good
Thank you so much 😀 many many thanks!
Super awesome
Thank you so much 😀
Dpid in delta and it's work with which devises/sensors.
Generally PID controllers work with analog signals. However, to answer this question the defined settings is important too.
Please put video for color sorting sir 🙏🙏🙏
Thanks for your comment💚💚
Hi plcgoods I am reviewing delta course , I don't know but I am confused at 8:20 , first for the ladder and described circuit are incorrect compared to logic table , and how y3 is off when I pressed the related pushbutton and y1 is off if we pressed the button although their ladder is the same
Hi there, The table is correct. I can answer your question, but please try to find it by watching the video carefully. Pay attention: These addresses (X0, X1, X2, X3) work based on the voltage state on their related pin, not based on their related pushbutton state. Also, during the first videos of our TIA Portal course, your problem was explained again.
@@plcgoods I got after watching Siemens v5 I apologize all your circuits and results are correct , thx for u advice I felt unbelievable comfort
Can I use the program I wrote with wplsoft without plc?
Hi there, Yes, You can test it with its simulator. Please search it on the internet.
@@plcgoods No, it's not a wpl soft simulation, it's a factory io simulation. I searched on the internet but couldn't find a definitive answer.
Bro is ot required to know c++ or c# to do something decent ?
NOT really you see most PLC control program here are developed using Ladder Logic Language
hi... is physical PLC necessary to do this exercise ???
I used it because I have the PLC, BUT one can use the Simatic Manager simulator software to build up the PLC code as well!
You can use simulator linking to keep server with out physical plc using commgr
Hello, what is fatek plc factory io please ???
I have no idea
The Factory i/o has the option of using the Fatek PLC to link to, BUT I never tried it out, because I do not have the physical PLC
You can download the trial version of the Factory I/O and test it
Hi
Glad to see you found the content useful!