Magnifique travail 😊 Je viens d’avoir le même appareil et je vais le restaurer également. Cette vidéo est une aide précieuse 👍. Toutes mes félicitations et un grand merci à vous
Thank you so much. This is a better video guide than any service manual. This is a huge, very useful work that is worthy of admiration. Like and subscribe to you!!!
Espectacular video. El video en si es una obra de arte. No me imagino el tiempo que tomo en crearlo y editarlo. Brillante. Hace poco me atrevi a desarmar parcialmente mi deck Sony TC-KA2 ES para cambiarle las bandas de goma, Lo hice apoyandome en un video que encontre aqui de un deck Sony similar. Ahora voy a tener que cambiarle el rodillo de goma pues no esta sonando bien. Pensaba que podia ser problema de azimuth pero el cabezal nunca fue tocado. Este video me va a ayudar.
Hola! muchas gracias por tus comentarios, me alegra que mi video te sirva de ayuda. También puedes grabarte mientras haces la reparación de tu Sony TC-KA2 ES, sobre todo durante el desmontaje, luego te puede servir de guía para el montaje final.
That was a lot of work. Primo tape deck. Teac/Tascam make some truly excellent products. I don't really like compact cassettes but I have a decent Kenwood model in my setup.
hello, how much patience and concentration!))) the video is over an hour, how long did it take to make?) magic video))) Thank you for the video!) спасибо за видео!)
Hi Sergey, I really appreciate your comments, many thanks. Took me several days to make it, I can't remember how many hours, but I ended up with more than 800 clips, the tough part is do the job without oscuring the filmed subject haha. Best regards
Excelente trabajo,profesional de verdad!Es el mejor video visto hasta ahorra en el youtube!Haz mas videos sobre como podemos arreglar todas las cosas ......azimuth,bias ,nivel pb/rec....tengo mas de 12 pletinas,i el nivel grabado en uno por ejemplo 0 db no es lo mismo en otro....es mas o menos! Eso es normal?Gracias,un saludo desde Rumania!
Muchas gracias por tu comentario! Es completamente normal que los niveles de grabación y reproducción sean diferentes entre pletinas, además con el uso y el paso del tiempo el nivel de reproducción va variando, por lo que resulta útil una cinta de calibración de playback. Un saludo"
this video is amazing!! no any technician would shows how to correctly disassemble it cause they want you go to them and pay lot of money. I have the same cassette deck and now i know all the secrets for a reparation. i want to thank you very much. can i ask where did you buy spare parts (belts and rollers)? which site?
Hello ! THANK YOU for this video. I own a 8030s that i have to change 2 belts and 2 rollers. Can you please suggest me the kit ( Belts and rollers ) you used and worked ? Thank you !
Hello ! Good job! Could you clarify what was the reason " I replaced the Integrated Circuit -Inverter- and one Resistor of the open/close system." ?? And one more remark. When I make maintenace of TEAC Decks I set addition small cooler radiator on the IC BA6219. It's heating too much, around 75 Cels Dergrees
Hi Oleg, many thanks for your comment! I had to replace the inverter IC because I assembled the worm gear in a wrong position, the door get stuck and burning the IC. Good idea putting a small cooler radiator on the IC, congrats!
Omg 😲 I never see a video like this before wow you are the master and master 🙌 professional engineer engineer 👏 we done and you are the guru 👏 unbelievable 👏 🙏 thank you and there not many professional guru 👏 master out there 👏 and God bless you 🙏 👏 can't wait to see more videos 👏 🙏 Sam😃😃😀👏👏👏👏👏👏👏😎😇
Amazing work, very helpful since i worked on some sankyo transports, i’m more used to sony tcm-200 transports. Right now i am in agony with a sony 970ES, can’t get the wow and flutter under controll.
@@gonzalorodriguezphotograph3423 The upper Sony decks have great tonality due to quality components and design, 870, 970, even my twins 750es sound amazing. But right now i’m more vintage inclined, i got two Kenwood KX-1100HX i restored, same transport as your Teac (extremely expensive and high quality machine 8030s)
Exceptionnel, tant sur le travail de la platine que sur la qualité de la vidéo. Bravo ! Il n'y a que Teac qui pouvait faire une telle machine sur la fin commerciale de la cassette. Au final comment juges-tu le son avec les composants d'origines de la platine parce que sur tapeheads, elle est assez décriée niveau sonore, froide, raide (de toute façon c'est un site pro nakamichi alors peu objectif selon moi)....Sacré boulot gonzalo, merci !
Jean Philippe, merci beaucoup pour ton commentaire, je pense aussi que le Teac V8030S a un bon son, sûrement un Nakamichi sonnera mieux mais ils sont plus délicats. Les gars des Tapeheads sont un peu élitistes hahaha ! Salutations.
It's really cool! Amazing. And I have TEAC V-8000V which recently started crashing my cassette tapes :( And what is really interesting it crashes SA Type || and not a normal.. I even cannot imaging whom can I find in Toronto or GTA to do everything that you did and how much will cost to me :(
Great video, you have put a lot of work into this - many thanks! I also have this machine, I've hardly used mine, as I've another 20 other decks to play about with! ;o) That middle idler gear doesn't look strong. Nalamichi also use a similar non-solid gear ..... why???
Thank you so much for your comment. You have a lot of decks to play with, great! As far as I know the transport in the V-8030S is from Sankyo, similar to what Nakamichi used in their later models, and I agree with you that the middle idle gear looks weak, but I have to admit that I never had problems with it.
hi, ive got the same deck but with brocken socket, this ine is going into display board. do you know where can i get it or at least what type of connector is? this connector connects 2 boards.
I have no experience with a v6030s, but I’ve just read this from www.tapeheads.net/threads/teac-v6030-any-good.5225/ “The TEAC V6030S is a fantastic machine and is basically (certainly externally) identical to the -8030. Instead of quartz-locked direct drive capstans it has a normal high-quality belt-drive double capstan drive. The difference is nigh-on zero. The rest is the same - the heads, the operating electronics, the metering and calibration systems - everything”
Congratulations, very sistematic and didactic your work, Some time ago i have for refurbish a Sony TC-K222 ESJ for the Japan Market, change the belts and pinch rollers, clean and lube all the mechanism; in the corner of the world is very difficult purchase the pieces and parts, in my case arriving from Slovakia, any way i can recover the original features of the model, for listen in analogic way and for digitalize many songs not edited in other formats. I suppost that you can understand the Spanish but your video is High Quality all in English i continous in the same language. Sorry for my eventual Mistakes, i a forever prentice in english, best regards from Recoleta, Santiago Of Chile
Patricio, muchas gracias por tus comentarios! NO me puedo ni imaginar lo difícil que habrá sido para ti la reconstrucción de máquina, enhorabuena por la constancia. Saludos!
Very qualified approach to the process entirely! The image and effects are outstanding 👏 p.s. Did you measure the wow/flutter after the belt replacement? If yes, what are the values?
Many thanks for comment! Dean, you aren't ignorant, you are curious. Yes, direct drive decks do have belts, thies deck has one for the secondary capstan, and other one for the mechanism.
@@gonzalorodriguezphotograph3423 Not...on all....i once see that on my 8030 and every 6030 and 8030 have that problem...when once you see that you see on all of them...that annoy me...older decks do not have that issue
Ηello and congratulations for your amazing video! I have the same TEAC model from 1997. I need to replace 2 belts and 2 pinch rollers. I wanted to ask you from the most online store I can to buy the belts and the pinch rollers for the 8030 ?
Thank you for your comments! I bought the belts and pinch rollers on eBay: www.ebay.es/itm/165675308954?hash=item269304979a:g:i5QAAOSwL~xjIZIl I hope you enjoy doing the maintenance service! Best regards,
Hi Dean, I never opened a V7000 unit, but I did a research on www.tapeheads.net anf I found this: "Teac V-7000 is solid piece of audio gear. This baby has a Sankyo mecha-block inside like in Nakamichi CR-4A, 5A with gear drive" So the V7000 mechanism is the same as the V8030s,but not the electronics I hope it can help you!
@@gonzalorodriguezphotograph3423 since posting this comment, I found out the v7000 mech has PAD2328 code written on them so it must be slightly different to PAD2333 in V8030. Thanks 👍
Hi, I recommend to visit tapeheads.net, it's an excellent source to learn all about decks. Please, follow this link www.tapeheads.net/threads/calibration-tutorial.59958/
@@gonzalorodriguezphotograph3423 can you show me how you adjust bias on some tapes? Im confused how my bias not work properly, only level works fine :(, i dont know what can cause this problem :(
japanese cassette decks use too many delicate plastic parts, weak motors, and belts. Try Revox for a life time tape deck with no cheap plastic parts or belts !
It is nice to see young people getting into repairs , these machines are fun to fix
Yeah I agree with you, fun and sometimes tricky!
I buy the pinch rollers from the same source, I have received the Haribo with mine too! Top quality and worth every penny!
That's very cool! Thank you for let me know!
Best repair video on TH-cam. Amazing. Good job man! 👍
Many thanks mate, I really appreciate it!
Magnifique travail 😊
Je viens d’avoir le même appareil et je vais le restaurer également. Cette vidéo est une aide précieuse 👍.
Toutes mes félicitations et un grand merci à vous
Thank you so much. This is a better video guide than any service manual. This is a huge, very useful work that is worthy of admiration. Like and subscribe to you!!!
Many thanks for your comments Anuar!! Very happy for your appreciation!!
Video favoloso,la qualità del lavoro e' eccellente,registratore fantastico!
Grazie mille per i tuoi commenti amico!
Great video 👍 This deck definitely deserves better caps 😀
Sure! many thanks Dimitar
@@gonzalorodriguezphotograph3423А как звучит эта колода?
Great work
Many thanks!
Unreal, totally professional-absolutely !!!
Many thanks mate!!
Está bien chido el video y algo preocupante el TOC. jajaja. Felicidades.
Jajaja muchas gracias!!
La plus fantastique,et belle video technique de demontage , entretien, remontage d'une platine cassette.👍👍👍👍👍
Merci beaucoup mon ami!!
Incredibly Well made video! I Learnt a lot💖
Thank you very much mate!!
Perfect 👍❤
Many thanks!!
Very nice. I’m working on my v-6030s now.After I’m done with mechanical part I will start recap.😊
Many thanks! You've got a lot to do!
А эти модели Teac v-6030 и v-8030 внутри одинаковые кроме того,что у модели V-8030 Direct drive, прямой привод?
Фантастическая работа!
Спасибо большое друг!
Respect !!!
Thanks a lot!
WOW! That is an impressive work!
A lot of work mate! thank you!
buen video y un servicio perfecto gracias por el video saludos desde Peru
Muchas gracias amigo!!
😎👍 You are real Master !
I like this video !
Super !
Thank you so much!!
Magnifique travail, si j'étais bon je me la réparerai moi aussi.
Merci beaucoup camarade, je suis sûr que si tu essaies ça ira!
very good job thanks
And thank you for watching!
Espectacular video. El video en si es una obra de arte. No me imagino el tiempo que tomo en crearlo y editarlo. Brillante. Hace poco me atrevi a desarmar parcialmente mi deck Sony TC-KA2 ES para cambiarle las bandas de goma, Lo hice apoyandome en un video que encontre aqui de un deck Sony similar. Ahora voy a tener que cambiarle el rodillo de goma pues no esta sonando bien. Pensaba que podia ser problema de azimuth pero el cabezal nunca fue tocado. Este video me va a ayudar.
Hola! muchas gracias por tus comentarios, me alegra que mi video te sirva de ayuda. También puedes grabarte mientras haces la reparación de tu Sony TC-KA2 ES, sobre todo durante el desmontaje, luego te puede servir de guía para el montaje final.
@@gonzalorodriguezphotograph3423 Si, muchas gracias. Asi lo hare.
@@stanley2004 y publícalo por favor!
Thanks for the video! Great deck, I love mine, still in almost mint condition!
Many thanks Ferenc, we all love cassette decks!
That was a lot of work. Primo tape deck. Teac/Tascam make some truly excellent products. I don't really like compact cassettes but I have a decent Kenwood model in my setup.
I really appreciate your comment!!
I'm so jealous!! Maybe one day I will have one??
For sure!
Trabajo profesional y minusioso. (Felicidades)..💯💢💯👍
Muchas gracias!!!
Great work, it’s a shame you did not replace the old capacitors
Many thanks Marcos!
Complimenti!!
Molte grazie!!!
Wow,what deck,respect maestro
Many thanks and have a good day!!
@@gonzalorodriguezphotograph3423 Скажите, вам не приходилось разбирать Teac 6030?
Нет, но V8030S и V6030S практически идентичны
@@gonzalorodriguez4903 Спасибо. А отличие между ними только в прямом приводе(direct drive)или ещё в чём-то?
@@gonzalorodriguez4903 Спасибо, отличное видео.
Increíble el trabajo realizado Gonzalo, una hora de placer 😍, larga vida para todas estas maquinas. Felicidades 🖤
Mil gracias compañero! Viva lo analógico!
hello, how much patience and concentration!)))
the video is over an hour, how long did it take to make?)
magic video)))
Thank you for the video!)
спасибо за видео!)
Hi Sergey, I really appreciate your comments, many thanks. Took me several days to make it, I can't remember how many hours, but I ended up with more than 800 clips, the tough part is do the job without oscuring the filmed subject haha. Best regards
Excelente trabajo,profesional de verdad!Es el mejor video visto hasta ahorra en el youtube!Haz mas videos sobre como podemos arreglar todas las cosas ......azimuth,bias ,nivel pb/rec....tengo mas de 12 pletinas,i el nivel grabado en uno por ejemplo 0 db no es lo mismo en otro....es mas o menos! Eso es normal?Gracias,un saludo desde Rumania!
Muchas gracias por tu comentario! Es completamente normal que los niveles de grabación y reproducción sean diferentes entre pletinas, además con el uso y el paso del tiempo el nivel de reproducción va variando, por lo que resulta útil una cinta de calibración de playback. Un saludo"
Everything is great. The spindle motor capacitors needed to be replaced.
Ok, thank you for your advice!
.....a narration would certainly have added an added appeal to this video!
Yes, for sure, I'll keep in mind for the next one!
Congratulations, excellent work
Many thanks mate!
this video is amazing!! no any technician would shows how to correctly disassemble it cause they want you go to them and pay lot of money. I have the same cassette deck and now i know all the secrets for a reparation. i want to thank you very much. can i ask where did you buy spare parts (belts and rollers)? which site?
Complimenti Davvero Bravissimo!!! Trovassi uno come te che riesca ad aggiustarmi la mia V6030S LIKE!!!
Grazie mille amico!! Puoi cercare nel forum www.tapeheads.net, ci sono molte persone che riparano registratori a cassette!
Hello !
THANK YOU for this video. I own a 8030s that i have to change 2 belts and 2 rollers. Can you please suggest me the kit ( Belts and rollers ) you used and worked ?
Thank you !
Hello ! Good job! Could you clarify what was the reason " I replaced the Integrated Circuit -Inverter- and one Resistor of the open/close system." ??
And one more remark. When I make maintenace of TEAC Decks I set addition small cooler radiator on the IC BA6219. It's heating too much, around 75 Cels Dergrees
Hi Oleg, many thanks for your comment! I had to replace the inverter IC because I assembled the worm gear in a wrong position, the door get stuck and burning the IC. Good idea putting a small cooler radiator on the IC, congrats!
Good afternoon, on my device sometimes the cassette tray lid does not close the first time, can you tell me why? Thank you.
Магия)
Omg 😲 I never see a video like this before wow you are the master and master 🙌 professional engineer engineer 👏 we done and you are the guru 👏 unbelievable 👏 🙏 thank you and there not many professional guru 👏 master out there 👏 and God bless you 🙏 👏 can't wait to see more videos 👏 🙏
Sam😃😃😀👏👏👏👏👏👏👏😎😇
Many thanks for your kind words Sam!!!!!!
Amazing work, very helpful since i worked on some sankyo transports, i’m more used to sony tcm-200 transports.
Right now i am in agony with a sony 970ES, can’t get the wow and flutter under controll.
Many thanks Vlad, Sony 970ES great deck!
@@gonzalorodriguezphotograph3423 The upper Sony decks have great tonality due to quality components and design, 870, 970, even my twins 750es sound amazing. But right now i’m more vintage inclined, i got two Kenwood KX-1100HX i restored, same transport as your Teac (extremely expensive and high quality machine 8030s)
Thanks for great, professional video production :) Why didn't you polish the capstans? They seem like they needed some love!
Thank you mate! This is my first job with decks, I didn't knew so many things, I'll keep it in mind for the next time.
I've watch it until you started pulling connectors by the Wires, -including the head-connectors !
Thanks for comment, there's a lot of thing to learn!
Exceptionnel, tant sur le travail de la platine que sur la qualité de la vidéo. Bravo ! Il n'y a que Teac qui pouvait faire une telle machine sur la fin commerciale de la cassette. Au final comment juges-tu le son avec les composants d'origines de la platine parce que sur tapeheads, elle est assez décriée niveau sonore, froide, raide (de toute façon c'est un site pro nakamichi alors peu objectif selon moi)....Sacré boulot gonzalo, merci !
Jean Philippe, merci beaucoup pour ton commentaire, je pense aussi que le Teac V8030S a un bon son, sûrement un Nakamichi sonnera mieux mais ils sont plus délicats. Les gars des Tapeheads sont un peu élitistes hahaha ! Salutations.
It's really cool! Amazing. And I have TEAC V-8000V which recently started crashing my cassette tapes :( And what is really interesting it crashes SA Type || and not a normal..
I even cannot imaging whom can I find in Toronto or GTA to do everything that you did and how much will cost to me :(
Thanks for comment! Try to do a search at www.tapeheads.net
@@gonzalorodriguezphotograph3423 Thank you :)
Great video, you have put a lot of work into this - many thanks!
I also have this machine, I've hardly used mine, as I've another 20 other decks to play about with! ;o)
That middle idler gear doesn't look strong. Nalamichi also use a similar non-solid gear ..... why???
Thank you so much for your comment. You have a lot of decks to play with, great! As far as I know the transport in the V-8030S is from Sankyo, similar to what Nakamichi used in their later models, and I agree with you that the middle idle gear looks weak, but I have to admit that I never had problems with it.
WITH ALL THAT AFORD; YOU MAY BUILD A BRAND NEW ONE ....
Haha, sure. Thanks!
hi, ive got the same deck but with brocken socket, this ine is going into display board. do you know where can i get it or at least what type of connector is? this connector connects 2 boards.
Sorry, I can`t help you. Maybe you find a solution at www.tapeheads.net.
Is it easy toi change pinch roller, to not remove many things??
Not really, you have to remove the bonnet, the front panel, the lid and the front escutcheon at least!
I only want My belts replacing 6030s? same?
I have no experience with a v6030s, but I’ve just read this from www.tapeheads.net/threads/teac-v6030-any-good.5225/
“The TEAC V6030S is a fantastic machine and is basically (certainly externally) identical to the -8030. Instead of quartz-locked direct drive capstans it has a normal high-quality belt-drive double capstan drive. The difference is nigh-on zero. The rest is the same - the heads, the operating electronics, the metering and calibration systems - everything”
Congratulations, very sistematic and didactic your work, Some time ago i have for refurbish a Sony TC-K222 ESJ for the Japan Market, change the belts and pinch rollers, clean and lube all the mechanism; in the corner of the world is very difficult purchase the pieces and parts, in my case arriving from Slovakia, any way i can recover the original features of the model, for listen in analogic way and for digitalize many songs not edited in other formats.
I suppost that you can understand the Spanish but your video is High Quality all in English i continous in the same language.
Sorry for my eventual Mistakes, i a forever prentice in english, best regards from Recoleta, Santiago Of Chile
Patricio, muchas gracias por tus comentarios! NO me puedo ni imaginar lo difícil que habrá sido para ti la reconstrucción de máquina, enhorabuena por la constancia. Saludos!
Very qualified approach to the process entirely!
The image and effects are outstanding 👏
p.s. Did you measure the wow/flutter after the belt replacement?
If yes, what are the values?
Many thanks for your comment, great! Yes, the w&f values seen on the video were taken after the belt replacement, and are around 024 - 0.26% RMS.
Can you fix my V-8030S like this again?
I'm sorry, I can't help you!
Call me ignorant but I thought this deck was direct drive?? Or do direct drive decks still have some belts??
Many thanks for comment! Dean, you aren't ignorant, you are curious. Yes, direct drive decks do have belts, thies deck has one for the secondary capstan, and other one for the mechanism.
@@gonzalorodriguezphotograph3423 thought it was something like that. Cheers 👍
All is super but all 6030 and 8030 have problem with right channel peak hold on meters...
Thanks, I didn't know that, I thought this problem was only in my unit!
@@gonzalorodriguezphotograph3423 Not...on all....i once see that on my 8030 and every 6030 and 8030 have that problem...when once you see that you see on all of them...that annoy me...older decks do not have that issue
I'll keep it mind, good to know it.
It doesn’t have its on tone generator?
Yes it does, for level and bias tuning.
Ηello and congratulations for your amazing video!
I have the same TEAC model from 1997.
I need to replace 2 belts and 2 pinch rollers.
I wanted to ask you from the most online store I can
to buy the belts and the pinch rollers for the 8030 ?
Thank you for your comments! I bought the belts and pinch rollers on eBay:
www.ebay.es/itm/165675308954?hash=item269304979a:g:i5QAAOSwL~xjIZIl
I hope you enjoy doing the maintenance service! Best regards,
@@gonzalorodriguezphotograph3423 THENK YOY VEEEERYYY MUCH !!!!!!!!
Добрый день ,написано 4к ,а видео с какой-то целью все размыто
Hi do you know if the Teac V7000 mechanism is the same?
Hi Dean, I never opened a V7000 unit, but I did a research on www.tapeheads.net anf I found this:
"Teac V-7000 is solid piece of audio gear. This baby has a Sankyo mecha-block inside like in Nakamichi CR-4A, 5A with gear drive"
So the V7000 mechanism is the same as the V8030s,but not the electronics
I hope it can help you!
@@gonzalorodriguezphotograph3423 since posting this comment, I found out the v7000 mech has PAD2328 code written on them so it must be slightly different to PAD2333 in V8030. Thanks 👍
@@dean6816 Ok, very well observed! Thanks for sharing it!
I have problem with calibration, and i dont know what should i do :(?
Hi, I recommend to visit tapeheads.net, it's an excellent source to learn all about decks. Please, follow this link
www.tapeheads.net/threads/calibration-tutorial.59958/
Thanks a lot :)
@@gonzalorodriguezphotograph3423 can you show me how you adjust bias on some tapes? Im confused how my bias not work properly, only level works fine :(, i dont know what can cause this problem :(
I fixed my deck, head azimth was not in good position, and now works perfect :)
Congrats! always is pleasant to do a good job!
Afaik amorphous heads are forbidden to demagnetize... 🙄
OK thanks, I'll keep it mind.
japanese cassette decks use too many delicate plastic parts, weak motors, and belts. Try Revox for a life time tape deck with no cheap plastic parts or belts !
Of course, Revox B215 is in my wish list!