My mother always took away the toys that she had given to me when i "did something bad" and she always yelled: "Want full control over something? Go buy it yourself". The xbox 360 was the first console that i bought with my own money, with savings from school's lunch money. Oh man, the memories, the joy when she came to take it away and i said: "NOPE, I BOUGHT THIS ONE, I HAVE FULL CONTROL, JUST LIKE YOU TOLD ME TO DO", we laughed and since then i never asked for anything else from her, i owe her so much. I am very glad to see this console being brought back to live. Thanks. Very nice video.
I got two faulty ones yesterday with red rings 1s 3 red rings pending fix and the other is 4 and I used my normal lead so a serious error occurred and then I pressed on and off 5 times plugged in it and it worked but it may ring again because it’s never opened (the sticker is intact) and from 2005 to 2006
@@javierm7339 Max Payne 3 is a game I've been playing recently on 360. It genuinely looks better than many of the 'current gen' games I've been playing on PS5.
I remember getting this error code as a kid, logging on to dial-up, and finding out someone thought the Xbox 360 was made with a glue that screwed with the components, and there was no fixing it. Feels like yesterday that I had to mail it in to Microsoft, waited two months before they told me it was broken, and sent me a used replacement that was also broken. Those were the days...
Oh dear. The ole heatgun treatment. The *only* proper fix is so remove the gpu and reball it with lead solder. You need a reballing station to do this, not a heatgun. This will work for a few weeks, maybe a months or so before the RROD returns. This isn't a real fix.
Unfortunately this user is correct. I've worked on thousands of these back in the day. This "OP (original poster)proposed fix" lasts about one week and then hair line fractures in the .6mm solderballs underneath the gpu happen again.(and goes back to 3ROD, three rings of death) It's a useful vod if you're going after a keyvault (dvdkey, console key to replace a banned keyvault usually cuz some player had a jtag and was running infected cod lobbies, lol) but other then that, it's not a fix in any way shape or form. That crappy tin/lead(combination) solder under the GPU and on it's seat .... (which is funny cuz microsoft knew completely about this, rip team xecuter) that's all gotta go with a solder sucker or solder braid. Take the chip "buy a GPU stencil" put a layer of flux on the chip and sammich it in the stencil and pour the solder balls into it (i usually go with silver bearing solder, why? works better for high temperature situations vs lead but hell even lead is better then tin/lead) flux (very specifically "paste") is there to make the solder stick to the GPU while you take the stencil apart just barely enough to keep everything aligned you can do this without a reflow station but man you got to have a really good eye. Pull stencil apart (if doing by eye) and use a "digital hot air gun with nozzle adapter to focus the airflow to the size of the chip" with almost zero air flow to get the solder balls to all "seat" on the gpu then put flux on motherboard and put chip very carefully on the motherboard and flow the chip to seat on the board. This can be done by eye and with a digital hot air gun with air flow control but man is it a bitch. Ya really should use a reballing station. I use an aoyue968A+ with a special nozzle designed for the GPU (can also locate) and do this by eye.
Also while ya got it apart ... i mean might as well upgrade to the availaible tech at the time. I can tell by the tamper proof sticker about what generation it is (op's post). Ditch that crappy 1st gen CPU heat sink and get the vulcan (found in elite models) and no more HT rubber band (belt driven, which is next up on the chopping block of things to fail) DVD roms, lol. Switch it to a liteon.(all mechanical) dvd drive.(you'll need to have tools to get at the keyvault to change dvdroms but it can be done)
@@bleachedbit I experimented with some active cooling using a 3d printed shroud and a small blower fan. got about 10c off the temperatures. There is so little room though! th-cam.com/video/e_bQBSTmFLM/w-d-xo.html I also put a 2nd gen heatsink on another, fitted a 50 mm fan on the top of the heatpipe & drilled holes in the top of the case to expel the hot air. That worked as well :)
@@sneezyferret6482 There was one i tried i don't remember the name of it but was an external had three fans in it and acted like a blower but attached to the back of the console. Damn thing sounded like a jet engine but yeah .... same effect, took about 10c off. These are good "prevention" pre-3rod measures but once ya go 3rod it won't protect ya from going 3rod again by doing what op did. That solder will just hair line fracture again. It's just a bad judgement call on microsoft's part.
It's always nice to see old and discarded consoles being brought back to life, so good job! It did seem to me you were a bit generous with the thermal paste, but I am certainly no expert on the subject.
As someone who's taken apart many 360s, it was way too much. A little goes a long way, and it spreads out as soon as you put the heat sink back on. Also, he didn't actually fix the system with the heat gun special. It's going to fail again because this console, assuming it's all original, has a faulty GPU.
Haha I’m not the only one ? 3 times and then they refused (I have to pay for the 4), After that I returned to old Sony and bought a PS3 never had any problems and the online was free, Xbox consoles and services no more. They’re machine was economically build and suffered from different manufacturers, Sony since it’s an electronic company manufacture themself.
Pretty cool video, I hope you have no intention of selling this console though. First off, as a technician and modder myself, I don't screw with red ringed systems. Most of them have the red ring because the GPU itself is faulty, and to replace one of those requires a BGA rework station. Second, you don't need that much thermal paste on a chip with no IHS. just a small dot will do you, and the paste will spread once you drop the heat sink on the chip. Also one more point, the fans should not be that loud on any console, but since this console isn't modded, there isn't really an easy way to pull real time temps. Just some suggestions to help for the future
Вот это восстановление! Прогрел отвалившийся чип строительным феном, при этом не сняв компаунд. Тут ГПУ менять надо, такой "ремонт" на несколько запусков. Оч сомнительный контент, дизлай однозначно!
@@dima56234 В интернете есть сервис мануалы по домашнему ремонту колец смерти. Там ничего сложного и из покупок потребуется только 8 болтов 5х10. Идея вкратце такая: разбираем, как на видео, обновляем термопасту, вместо дурацких крестов закрепляем оба чипа болтами с пластиковыми шайбами. Собираем в корыто без вентиляторов (!!!). Вкючаем и гоняем приставку примерно минуту в режиме перегрева. Потом всё собираемых и вуаля - зелёные индикаторы. Сам буду пробовать на днях так делать.
God I love this thing. My first console I ever had, I was born in 2007 so the PS4 and stuff was released when I was around 6, so when I was around 11 and I received the Xbox 360 it waaaasss a little outdated, nonetheless I loved this console and had a great time with it, I had the white and black version of the original and the black slim version by the time I was 12 because they were so cheap being old and used, obviously I was thrilled when I got my hands on a PS4 Pro God of War edition 1tb ( For only 240$ I might add. ) but still the Xbox 360 is my favorite console, I'll still pick a modern console over it but it is still my favorite.
И хватит этого ремонта на 20 минут игры))))) Видеочип менять надо, а не прогревать. И радиатор на центральный процессор был установлен с поворотом на 90°, пластины охлаждения поперек потока воздуха. Сравните положение радиатора при разборке, в начале видео, и при сборке, в конце))))))
А тут разве не проблема в "шариках"? Которые отвалились со временем. Прогревом просто временно восстанавливают контакт. Зачем менять видеочип? Я не специалист, просто интересуюсь)
@@sergeyteplyakov807 тут проблема не в "шариках". Кристалл чипа расположен на подложке из текстолита. По текстолиту расходятся микроскопические дорожки, как раз к шарикам. Так вот кристалл сделан из кремния, а подложка из текстолита. Коэффициент расширения разный у кремния и текстолита. Чип очень горячий в работе. Постоянные скачки температуры приводят к отслаиванию кристалла от этих микроскопических дорожек. Когда нерабочий чип прогревают, температура гораздо выше рабочей. Худо-бедно появляется контакт в этом месте, чип оживает. Но не надолго. И когда делают реболл, выпивают чип, накатывают новые шары, чип также оживает, но не от того, что шары новые, а всё так же из-за нагрева.
youll have to find out the hard way. this console will last anywhere from 1 hours to 1 week. looks good and im sure you know how long this process lasts and just waNTed to show how it now boots.
let alone incorrect method of using paste flux instead of liquid flux. Also should have used heat tape to protect the caps and parts around the cpu/gpu area
Everybody is so positive and that's nice but of course this is not the way to repair this console. It needs reballing, not reflowing. You just gave it a few more weeks / months of life before it breaks down again (if you use it regularly). I do not ignore the fact that you cared for this otherwise hopeless device but the internet has no shortage of videos proposing this technique as the solution when it clearly isn't. This is more of a facelift rather than repair! The video does help you to relax which may be the best about it.
good luck getting that disc drive to open 😂 have had to repair my old one so many times over the years. replacing those damn rubber band and gears. Loved the video thanks for sharing ❤️
awsome job, the only problem in the repair is the reflow, because redlight will become again, in this particular case the better way is to do reballing, but this is a zephhyr or a falcon motherboard, and in the same way doing a reballing the problem can becoume again
You are awesome at making videos. Gorgeous lighting and attention to detail. The system board and other things are very clearly visible. Really awesome. You clean every millimeter of the console from shit - amazing. But I almost died with laughter from disassembling the plastic case with a small screwdriver))) And the "reballing" also turned out to be wow. Well, how the console howled louder than a video game - it was exciting) Now we know what will happen if we alternatively arrange the cooling elements) In any case, those who know how to repair - they don't need a video, and those who don't know how - will appreciate your work)
seeing xbox 360 being called '' retro console '' really makes me feel old.. i remember play cod black ops kino der toten with a friend that live next to me, it's like it was just yesterday, but all those years already passed.. all those years.. how can time pass so quick?? :(( those moments will never come back.. it's really incredible.. i feel my self like yes i lived all the best era of gaming, and i feel so nostalgic about it.. 2008-2012 era was the best.. miss those years when i was only a kid..
First few I did similar to this, but moved up to reballing and actually bolting the heatsinks down. So many mods for these. Loved the video and look forward to the next.
Thanks for uploading this! What brush are you using to clean the motherboard with? I've been using cotton swabs but they get stuck on some components and looking into a brush, hence why I asked
So basically the red ring of death is caused by dirt on the CPU? You did so much impeccable restoration that you swiped the problem in the blink of an eye. Cheers to you! * Podrías comentar en el video de la posible causa del "anillo rojo de la muerte" ¡Saludos!
Loved it! What did you use for the plastic case ? Some kinda solder substance then super glue and lastly heatgun with something. And white substance was some kinda plastic scratch removal ?
Шикарный ремонт.. обслужил, почистил, отмыл обязательно все блестяшки- все, красный огонь прошел. А то, что отъехал чип, и прогревом ты его восстановил, или за кадром плату подменил- об этом история умалчивает.
So... Think it will be work forever non less. How can I send to you my Xbox for fix? I will not spare the money for such master. Gorgeous fix, amazing, what a legend.
If you can stand the smell acetone is one of the best liquids for removing stickers and old thermal paste. I’ve heard some say Mineral spirits and lighter fluid, but I’m not certain those couldn’t damage some other part of the unit.
PARABÉNS AMIGO, é sensacional o que você faz, sempre sonhei com um XBOX 360 WHITE, hoje tenho um XBOX ONE S, incrível ver um console maravilhoso ser ressuscitado, um GRANDE ABRAÇO.
I remember the RROD and having to wrap the console in a bunch of towels to overheat it and get it working, then never turning the console off. Toi bad I didn't know how to do this back then. GG.
Nice better than what I thought to do along the way. But one thing, I’m not sure, is if the fans of the 360 are that loud possibly from being worn out, I would have bought a replacement fan for that. I remember replacing the fan for the WiiU when it sounded louder than usual. Got the fan off Amazon and after replacing it, it sounded much better. But like I said, I’m not sure if it would make a difference or not.
Unfortunately, I did not install the CPU heat sink correctly, I realized this mistake later after I finished the video so I corrected it after the video, Glad you enjoyed it! ❤️
Радиатор процессора установлен не правильно! Время 11.01 в видео, ребра радиатора процессора направлены перпендикулярно воздушному потоку от вентиляторов. Поверните радиатор на 90 градусов и будет счастье. В следующих восстановлениях будьте внимательнее. The processor heatsink is not installed correctly! The time is 11.01 in the video, the processor heatsink fins are directed perpendicular to the air flow from the fans. Turn the radiator 90 degrees and you will be happy. Be more careful in the next restorations.
термопасту создавали чтобы заполнить все микро трещины и углубление со стороны радиатора, для более хорошего отвода тепла надо мазать меньше термопасты
I noticed that to was. I was hoping I wasn't the only one to notice he put the heatsink the wrong direction. Glad to see you noticed almost everyone else over looked that
Знал бы я 10 лет назад что все так легко чиниться. Сейчас и паяльная станция с феном есть. Делов ремонта. У меня красные огни переодически из за не контакта были)
Widzę że naprawdę Super serwisant... Nie odczytałeś nawet kodu błędu, a Walisz CPU i GPU z Heatguna 400ma Stopniami, Brawo... Układy aż sine od Grzania ;D każdą konsole tak naprawiasz? Gratuluje inteligencji... I nie, to nie jest naprawa, to jest jak jebnięcie płyty z Młotka...
You can’t install a new CPU because the encryption system works together with the NAND FLASH and the DVD drive. It will not boot anymore. And it would be difficult to purchase such parts. So it is really only possible to do reballing of existing ones.
I look at this and think if you are going to put that much effort into restorign the case may as well paint it. what temp and for how long did you use the heatgun? could you please list all the tools etc you use as well
What an awesome vid! Seeing this console from the condition in which you got it to after is amazing sight to be seen. I've dabbled into this world very carefully. I also have a Red ring Xbox 360 and plan on fixing it. It's great to see vids like this to help folks like me who aren't very familiar with everything you just did. It seems very relaxing going through the process and satisfying when it's complete and you have not only fixed your problem but brought it back to life in every aspect. Great job with the vid and consider me a sub! 👊
@@pashamamedov6773 Лучше замена, так как под кремниевым кристаллом, тот что залит наглушняк конпаундом к подложке шары не поменяешь, а греется как раз сам кристалл.
Had this problem when I was downrange. My friend and I used to take q tips and stick it in the back to prevent the fan from running. It would heat up and then we shut the console off. Wait a few minutes and the 3 rings of death were gone and we played it again. Happened a couple times and each time it worked.
overheating the console was a way to "reflow" the balls (badly) and was permitting the contacts to be in contact again, in my case it was the ram that was in fault, i used an eraser cutted to push the rams chips on the motherboard (i guess that was the case here too, with the "silicon pads"), worked too but i wouldn't call this a fix ^^
I remember having to fix the RROD when I was 13 I was so astounded that it worked I almost cried. I didn’t put the xclamps back on used a different method.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
My mother always took away the toys that she had given to me when i "did something bad" and she always yelled: "Want full control over something? Go buy it yourself". The xbox 360 was the first console that i bought with my own money, with savings from school's lunch money. Oh man, the memories, the joy when she came to take it away and i said: "NOPE, I BOUGHT THIS ONE, I HAVE FULL CONTROL, JUST LIKE YOU TOLD ME TO DO", we laughed and since then i never asked for anything else from her, i owe her so much. I am very glad to see this console being brought back to live. Thanks. Very nice video.
Nice .
At least she kept her end of the deal. Mine threw my ps2 off the balcony. 😔
@@InstiGator805 what a crazy mother u got there
@@InstiGator805 Did u buy it?
@@persona83 yes
Crazy to see the 360 being called a "Retro Console"
Yeah crazy how it’s was made 15 years ago
I got two faulty ones yesterday with red rings 1s 3 red rings pending fix and the other is 4 and I used my normal lead so a serious error occurred and then I pressed on and off 5 times plugged in it and it worked but it may ring again because it’s never opened (the sticker is intact) and from 2005 to 2006
Mine is still brand new and has better games than some of the crap today and still looks amazing
Nah dude it isn't retro, that terms reserved for Atari etc, 360s the uprising I'd say
@@javierm7339 Max Payne 3 is a game I've been playing recently on 360. It genuinely looks better than many of the 'current gen' games I've been playing on PS5.
I remember getting this error code as a kid, logging on to dial-up, and finding out someone thought the Xbox 360 was made with a glue that screwed with the components, and there was no fixing it. Feels like yesterday that I had to mail it in to Microsoft, waited two months before they told me it was broken, and sent me a used replacement that was also broken. Those were the days...
thanks for watching
@@resEG de nada Bro
@@resEG nea
@@fandeaguafresquita5705 jajaja
@@Nuez27783 jajaja
The amount of care you put into your repairs is amazing. With the cracked case, I would've stopped at the super glue and called it good.
Damn
super glue to tech is not amazing repairs, a repair is a repair
@@pablonaranjo nk
:) магия воды и фена! А главное спирт, он все исцеляет:)
Oh dear. The ole heatgun treatment.
The *only* proper fix is so remove the gpu and reball it with lead solder. You need a reballing station to do this, not a heatgun.
This will work for a few weeks, maybe a months or so before the RROD returns. This isn't a real fix.
100%
This is a great "how not to" video
Unfortunately this user is correct. I've worked on thousands of these back in the day. This "OP (original poster)proposed fix" lasts about one week and then hair line fractures in the .6mm solderballs underneath the gpu happen again.(and goes back to 3ROD, three rings of death) It's a useful vod if you're going after a keyvault (dvdkey, console key to replace a banned keyvault usually cuz some player had a jtag and was running infected cod lobbies, lol) but other then that, it's not a fix in any way shape or form. That crappy tin/lead(combination) solder under the GPU and on it's seat .... (which is funny cuz microsoft knew completely about this, rip team xecuter) that's all gotta go with a solder sucker or solder braid. Take the chip "buy a GPU stencil" put a layer of flux on the chip and sammich it in the stencil and pour the solder balls into it (i usually go with silver bearing solder, why? works better for high temperature situations vs lead but hell even lead is better then tin/lead) flux (very specifically "paste") is there to make the solder stick to the GPU while you take the stencil apart just barely enough to keep everything aligned you can do this without a reflow station but man you got to have a really good eye. Pull stencil apart (if doing by eye) and use a "digital hot air gun with nozzle adapter to focus the airflow to the size of the chip" with almost zero air flow to get the solder balls to all "seat" on the gpu then put flux on motherboard and put chip very carefully on the motherboard and flow the chip to seat on the board. This can be done by eye and with a digital hot air gun with air flow control but man is it a bitch. Ya really should use a reballing station. I use an aoyue968A+ with a special nozzle designed for the GPU (can also locate) and do this by eye.
Also while ya got it apart ... i mean might as well upgrade to the availaible tech at the time. I can tell by the tamper proof sticker about what generation it is (op's post). Ditch that crappy 1st gen CPU heat sink and get the vulcan (found in elite models) and no more HT rubber band (belt driven, which is next up on the chopping block of things to fail) DVD roms, lol. Switch it to a liteon.(all mechanical) dvd drive.(you'll need to have tools to get at the keyvault to change dvdroms but it can be done)
@@bleachedbit I experimented with some active cooling using a 3d printed shroud and a small blower fan. got about 10c off the temperatures. There is so little room though!
th-cam.com/video/e_bQBSTmFLM/w-d-xo.html
I also put a 2nd gen heatsink on another, fitted a 50 mm fan on the top of the heatpipe & drilled holes in the top of the case to expel the hot air. That worked as well :)
@@sneezyferret6482 There was one i tried i don't remember the name of it but was an external had three fans in it and acted like a blower but attached to the back of the console. Damn thing sounded like a jet engine but yeah .... same effect, took about 10c off. These are good "prevention" pre-3rod measures but once ya go 3rod it won't protect ya from going 3rod again by doing what op did. That solder will just hair line fracture again. It's just a bad judgement call on microsoft's part.
It's always nice to see old and discarded consoles being brought back to life, so good job! It did seem to me you were a bit generous with the thermal paste, but I am certainly no expert on the subject.
A bit to much thermo paste for sure.
Especially since he didn't actually fix it and it's goong to break again lol
it was failed for a reason. M$ can afford Thermal Paster
As someone who's taken apart many 360s, it was way too much. A little goes a long way, and it spreads out as soon as you put the heat sink back on. Also, he didn't actually fix the system with the heat gun special. It's going to fail again because this console, assuming it's all original, has a faulty GPU.
You took 100 times more care on this restoration than Microsoft ever did the 4 times I sent my 360 off to repair the red rings I got.
Good job, man!
Haha I’m not the only one ? 3 times and then they refused (I have to pay for the 4), After that I returned to old Sony and bought a PS3 never had any problems and the online was free, Xbox consoles and services no more. They’re machine was economically build and suffered from different manufacturers, Sony since it’s an electronic company manufacture themself.
Yeah on the Xbox 360 slim they solved the red ring of death
@@PheonixVideos07 Unfortunately that isn't true, the Slim still suffers from hardware failure, but it's called "the red dot of death" instead of RROD.
@@busterscrugs oh
@@busterscrugs at least it can be fixed
Pretty cool video, I hope you have no intention of selling this console though. First off, as a technician and modder myself, I don't screw with red ringed systems. Most of them have the red ring because the GPU itself is faulty, and to replace one of those requires a BGA rework station. Second, you don't need that much thermal paste on a chip with no IHS. just a small dot will do you, and the paste will spread once you drop the heat sink on the chip. Also one more point, the fans should not be that loud on any console, but since this console isn't modded, there isn't really an easy way to pull real time temps. Just some suggestions to help for the future
Seeing the Xbox 360 being called a "retro" console makes me feel so old! Where the hell did all that time go?
thanks for watching
Вот это восстановление! Прогрел отвалившийся чип строительным феном, при этом не сняв компаунд. Тут ГПУ менять надо, такой "ремонт" на несколько запусков. Оч сомнительный контент, дизлай однозначно!
у меня тоже 3 красные горят что надо делать?
@@dima56234 то что на видео это временный ремонт,а чтобы починить навсегда там уже чип менять,а это уже очень дорогое удовольствие,минимум 5-10 тысяч
@@dima56234 В интернете есть сервис мануалы по домашнему ремонту колец смерти. Там ничего сложного и из покупок потребуется только 8 болтов 5х10. Идея вкратце такая: разбираем, как на видео, обновляем термопасту, вместо дурацких крестов закрепляем оба чипа болтами с пластиковыми шайбами. Собираем в корыто без вентиляторов (!!!). Вкючаем и гоняем приставку примерно минуту в режиме перегрева. Потом всё собираемых и вуаля - зелёные индикаторы. Сам буду пробовать на днях так делать.
@@dedavalera952 тоже временно. Делал такой прижим.
это барыга продаст быстро и всё
God I love this thing. My first console I ever had, I was born in 2007 so the PS4 and stuff was released when I was around 6, so when I was around 11 and I received the Xbox 360 it waaaasss a little outdated, nonetheless I loved this console and had a great time with it, I had the white and black version of the original and the black slim version by the time I was 12 because they were so cheap being old and used, obviously I was thrilled when I got my hands on a PS4 Pro God of War edition 1tb ( For only 240$ I might add. ) but still the Xbox 360 is my favorite console, I'll still pick a modern console over it but it is still my favorite.
Same
thanks for watching
thanks for watching
This makes me feel old 😂
Yes the Xbox 360 controller, Xbox 360 arcade controller and all the versions are really cool
И хватит этого ремонта на 20 минут игры))))) Видеочип менять надо, а не прогревать. И радиатор на центральный процессор был установлен с поворотом на 90°, пластины охлаждения поперек потока воздуха. Сравните положение радиатора при разборке, в начале видео, и при сборке, в конце))))))
А чего ещё ты хотел от азиатов у них главное контент а не качество. Это тебе не notebook-31!
А тут разве не проблема в "шариках"? Которые отвалились со временем. Прогревом просто временно восстанавливают контакт. Зачем менять видеочип? Я не специалист, просто интересуюсь)
@@sergeyteplyakov807 всё верно прогрев на время помогает..на авито скинуть)
@@sergeyteplyakov807 тут проблема не в "шариках". Кристалл чипа расположен на подложке из текстолита. По текстолиту расходятся микроскопические дорожки, как раз к шарикам. Так вот кристалл сделан из кремния, а подложка из текстолита. Коэффициент расширения разный у кремния и текстолита. Чип очень горячий в работе. Постоянные скачки температуры приводят к отслаиванию кристалла от этих микроскопических дорожек. Когда нерабочий чип прогревают, температура гораздо выше рабочей. Худо-бедно появляется контакт в этом месте, чип оживает. Но не надолго. И когда делают реболл, выпивают чип, накатывают новые шары, чип также оживает, но не от того, что шары новые, а всё так же из-за нагрева.
youll have to find out the hard way. this console will last anywhere from 1 hours to 1 week. looks good and im sure you know how long this process lasts and just waNTed to show how it now boots.
let alone incorrect method of using paste flux instead of liquid flux. Also should have used heat tape to protect the caps and parts around the cpu/gpu area
Yeah this wont fix anything, gpu has to be replaced. Also the heatsink is installed wrong...
I appreciate you taking the time to speak with me. Thanks for the helpful advice!❤️
He didn't say a word.
Just did the same! I bought 2 of them with 1 controller for 20$
Good to see that others are doing the same :)
thanks for watching
No words ❤️😘 good restoration my dear
thanks for watching
This is so therapeutic to just sit and watch, great work!
please record next video how this xbox will work after 2-4 weeks :)
The amount of care you put into your repairs is amazing and i love how you use om nom as maneger
Everybody is so positive and that's nice but of course this is not the way to repair this console. It needs reballing, not reflowing. You just gave it a few more weeks / months of life before it breaks down again (if you use it regularly). I do not ignore the fact that you cared for this otherwise hopeless device but the internet has no shortage of videos proposing this technique as the solution when it clearly isn't. This is more of a facelift rather than repair! The video does help you to relax which may be the best about it.
good luck getting that disc drive to open 😂 have had to repair my old one so many times over the years. replacing those damn rubber band and gears. Loved the video
thanks for sharing ❤️
11:25 the heatsink was replaced wrong. 90° The cooling isn't good, if you dont replace it again
Yeah you can hear when he powers it up, it’s just slowly getting hotter and hotter. Fans ramping up.
спасибо, посмеялся с прогрева феном )
awsome job, the only problem in the repair is the reflow, because redlight will become again, in this particular case the better way is to do reballing, but this is a zephhyr or a falcon motherboard, and in the same way doing a reballing the problem can becoume again
@@akairas6 in this particular case yes, because it's a xeon motherboard, but reflow is not a repair, in many cases reflow can damage the chip
You are awesome at making videos. Gorgeous lighting and attention to detail. The system board and other things are very clearly visible. Really awesome.
You clean every millimeter of the console from shit - amazing.
But I almost died with laughter from disassembling the plastic case with a small screwdriver))) And the "reballing" also turned out to be wow. Well, how the console howled louder than a video game - it was exciting) Now we know what will happen if we alternatively arrange the cooling elements)
In any case, those who know how to repair - they don't need a video, and those who don't know how - will appreciate your work)
Nice 👍 video 📸 Xbox 360 my childhood 🤣
11:01 That heat sink is on the wrong way homie
Acho muito maneiro pega umas parada nesse estado e deixar elas novinha bom trabalho meu amigo😃😃
olá obrigado por assistir
seeing xbox 360 being called '' retro console '' really makes me feel old.. i remember play cod black ops kino der toten with a friend that live next to me, it's like it was just yesterday, but all those years already passed.. all those years.. how can time pass so quick?? :(( those moments will never come back.. it's really incredible.. i feel my self like yes i lived all the best era of gaming, and i feel so nostalgic about it.. 2008-2012 era was the best.. miss those years when i was only a kid..
First few I did similar to this, but moved up to reballing and actually bolting the heatsinks down. So many mods for these. Loved the video and look forward to the next.
This looks brand new !! Good work sir.
Thanks for uploading this! What brush are you using to clean the motherboard with? I've been using cotton swabs but they get stuck on some components and looking into a brush, hence why I asked
This brush, purchased from a women's cosmetics store, is designed for facial use.
What you did solves it for a while, then the 3RL comes back, the correct thing is to do the rebaling in the bga solder!
When I got the RRoD I did this a few times and added about an extra 3 years to the life of my xbox. It's so fun to take apart and fix
Thank you for repairing this legendary console
I have 360 since 2010 still kicking ass
So basically the red ring of death is caused by dirt on the CPU?
You did so much impeccable restoration that you swiped the problem in the blink of an eye.
Cheers to you!
* Podrías comentar en el video de la posible causa del "anillo rojo de la muerte"
¡Saludos!
It's not because of the dirt. He warm the CPU and GPU up to 400°with flux. But I think it only a matter of time that it's broken again.
Loved it! What did you use for the plastic case ? Some kinda solder substance then super glue and lastly heatgun with something.
And white substance was some kinda plastic scratch removal ?
Шикарный ремонт.. обслужил, почистил, отмыл обязательно все блестяшки- все, красный огонь прошел. А то, что отъехал чип, и прогревом ты его восстановил, или за кадром плату подменил- об этом история умалчивает.
So... Think it will be work forever non less. How can I send to you my Xbox for fix? I will not spare the money for such master. Gorgeous fix, amazing, what a legend.
thanks for watching
@@resEG any time, my man, any time. You always can find me in trolls lair...
16:06 Did you install the CPU cooler in the wrong orientation in purpose or....?
Wow, a new Great video 👏🤝👏🤝🤝👍
thanks for watching
Reflow tricks are good but very temporary. Once you see that red ring, it's Game Over.
If you can stand the smell acetone is one of the best liquids for removing stickers and old thermal paste. I’ve heard some say Mineral spirits and lighter fluid, but I’m not certain those couldn’t damage some other part of the unit.
Lighter fluid works great removing thermal paste.
Great 👍👍👌🆗 restoration
Думаю стоит подумать о приобретении электрической отвёртки.Как в конце консоль не ставят,боком.Это прикрывает доступ тепло отведению.
Спасибо за просмотр
PARABÉNS AMIGO, é sensacional o que você faz, sempre sonhei com um XBOX 360 WHITE, hoje tenho um XBOX ONE S, incrível ver um console maravilhoso ser ressuscitado, um GRANDE ABRAÇO.
muito obrigado❤️
I remember the RROD and having to wrap the console in a bunch of towels to overheat it and get it working, then never turning the console off. Toi bad I didn't know how to do this back then. GG.
thanks for watching❤️
Holy shit. You put thermal paste on almost every component and these fans are still working so loud :o X360 magic
2005? Geez that made me feel old lmao I grew up on this thing
Nice better than what I thought to do along the way. But one thing, I’m not sure, is if the fans of the 360 are that loud possibly from being worn out, I would have bought a replacement fan for that. I remember replacing the fan for the WiiU when it sounded louder than usual. Got the fan off Amazon and after replacing it, it sounded much better. But like I said, I’m not sure if it would make a difference or not.
Unfortunately, I did not install the CPU heat sink correctly, I realized this mistake later after I finished the video so I corrected it after the video, Glad you enjoyed it! ❤️
what is the solution you use to whiten the cases for 48 hours? Thanks Great videos
Salon Care 40 Volume + OXI Action + sodium bicarbonate + UV light
thanks for watching
Excelente video, amigo. Tendré que aplicar esa limpieza profunda con mi consola.
Muchos muchas gracias❤️
Ya se considera retro el Xbox 360? :O saludos y buen video 😃
Вот таких "умельцев" со строительным феном, надо от электроники держать за версту!
Разобрался бы сначала, зачем он прогревал материнку с процами, а потом уже умничал
Офигеть ты молодец... Как я раньше до этого не додумался?!
И ещё чип надо менять, приставка после прогрева долго не проживёт. И не делайте так как автор данного видео я про фен.
A video where the youtuber doesn´t speak? Automatic subscription
restored to life, amazing
Glad you enjoyed it! ❤️
I love how at the end it sounds like the song is being sung by chipmunks
Quedó como nuevo nuevo suscriptor soy de México 💕
Hola, gracias por vernos y saludos a México.
Радиатор процессора установлен не правильно! Время 11.01 в видео, ребра радиатора процессора направлены перпендикулярно воздушному потоку от вентиляторов. Поверните радиатор на 90 градусов и будет счастье. В следующих восстановлениях будьте внимательнее.
The processor heatsink is not installed correctly! The time is 11.01 in the video, the processor heatsink fins are directed perpendicular to the air flow from the fans. Turn the radiator 90 degrees and you will be happy. Be more careful in the next restorations.
Счастье будет , но с таким ремонтом не на долго.
@@VJJosef согласен, прогрев поможет ненадолго. Но собирать надо в любом случае правильно.
18:42 That timing was satisfying.
термопасту создавали чтобы заполнить все микро трещины и углубление со стороны радиатора, для более хорошего отвода тепла надо мазать меньше термопасты
Спасибо за полезный совет!
Respekt was du alles machst !
vielen, vielen Dank
The CPU cooler has the wrong position!
I noticed that to was. I was hoping I wasn't the only one to notice he put the heatsink the wrong direction. Glad to see you noticed almost everyone else over looked that
@@johnpoe3855 Well, I mean, he says so right then, so I guess most felt there was no need to.
No clearly most people overlooked cause they're not really tech savvy and said nothing cause in there eyes nothing wrong stood out about it
Знал бы я 10 лет назад что все так легко чиниться. Сейчас и паяльная станция с феном есть. Делов ремонта. У меня красные огни переодически из за не контакта были)
Widzę że naprawdę Super serwisant... Nie odczytałeś nawet kodu błędu, a Walisz CPU i GPU z Heatguna 400ma Stopniami, Brawo... Układy aż sine od Grzania ;D każdą konsole tak naprawiasz? Gratuluje inteligencji... I nie, to nie jest naprawa, to jest jak jebnięcie płyty z Młotka...
Am I having a deja vu or is this a reupload video? I think I already watch this last month. Anyway, nice restoration!
I could have swore I've seen this video before aswell. I even remember him putting In the cooling system the wrong way at first.
Starting 13:10, what products do you use to paste it? I want to restore my old xbox360 too. Thanks from Spain
the start of this video bears a striking resemblance to odd tinkering's xbox 360 repair video
Using a heat gun is only a temporary fix. The permanent fix is to install a new CPU or GPU and use better solder than Microsoft used
X-clamp
You can’t install a new CPU because the encryption system works together with the NAND FLASH and the DVD drive. It will not boot anymore. And it would be difficult to purchase such parts. So it is really only possible to do reballing of existing ones.
I look at this and think if you are going to put that much effort into restorign the case may as well paint it.
what temp and for how long did you use the heatgun?
could you please list all the tools etc you use as well
Você é o melhor amigo, sou do Brazil e curti demais seus vídeos 😄🖐️
🤜🤛
What an awesome vid! Seeing this console from the condition in which you got it to after is amazing sight to be seen. I've dabbled into this world very carefully. I also have a Red ring Xbox 360 and plan on fixing it. It's great to see vids like this to help folks like me who aren't very familiar with everything you just did. It seems very relaxing going through the process and satisfying when it's complete and you have not only fixed your problem but brought it back to life in every aspect. Great job with the vid and consider me a sub! 👊
Xbox 360 was great console in 2006 and still.
When your childhood console becomes a "retro console"
So true.
The Xbox 360 was released on November 22, 2005, in the United States and Canada; December 2, 2005, in Europe and December 10, 2005, in Japan.
Через 30 дней ты получишь снова три красных огня !!!
Устранить красный огонь помогает реболл или замена графического чипа.
@@pashamamedov6773 Лучше замена, так как под кремниевым кристаллом, тот что залит наглушняк конпаундом к подложке шары не поменяешь, а греется как раз сам кристалл.
Он опять разберет и пропылесосит и так всю жизнь!
man that is a lot of work but wow what a great tutorial.
So, if I buy the broken console and follow your instructions video, I'll be able to play it again? Seriously, i'm really like u vids 🎉🎉👍👍
not broken but with red ring of death
@@shiroumxm2052 yes, i buy rrod console, try this step to my xbox, and i'll br able to play again?
@@muhammadmuharam6150 Yes. I´ve done it before and it works
@@shiroumxm2052 just need isopropyl alcohol, and replace thermal paste?
@@muhammadmuharam6150 he used pistol heat .. not only isopropyl
Next video: I've found an Atari 7800 broke in half, under the sea. Can I fix it? xDDD Excellent channel, pal!! :)
Where did you get this old stuff btv it's cool
Had this problem when I was downrange. My friend and I used to take q tips and stick it in the back to prevent the fan from running. It would heat up and then we shut the console off. Wait a few minutes and the 3 rings of death were gone and we played it again. Happened a couple times and each time it worked.
Glad you enjoyed it!
overheating the console was a way to "reflow" the balls (badly) and was permitting the contacts to be in contact again, in my case it was the ram that was in fault, i used an eraser cutted to push the rams chips on the motherboard (i guess that was the case here too, with the "silicon pads"), worked too but i wouldn't call this a fix ^^
*Good Video Dear Brother Restoration EG!!! Thanks for Share this Great Job!!! Have a Wonderful Tuesday...* 😎😁😀💁🏻♂️🎮🕹👷♂️👨🔧🛠🧤💿📼✌👍
You have some valuable skills 💯
Looks like you forgot to clean and repair the spring retracting cover for the controller ports. Looks yellow and loose!
Indeed, this is what happened, thanks for watching
you mounted the vertical cooler wrong way 🤣 tthats why it's running like a jet engine
you reinstalled the cpu heatsink (the tall one) in the wrong direction but either then that great vid.
Cool das du eine versuchst zu reparieren 👀
the cpu heatsink is incorrectly installed...
Amazing! I love the xbox brand
Nice work, awesome...
Incrível... Parabéns meu amigo...
Um brinca finalmente
И на сколько хватит этого прогрева?на неделю?
I remember having to fix the RROD when I was 13 I was so astounded that it worked I almost cried. I didn’t put the xclamps back on used a different method.
Bad thing about doing reflow is that it will get red ring of death soon, it's a fast and temporal fix in this case
Great work, dude!
thanks for watching
Plot twist: he couldnt fix it, and actually just bought a brand new one to replace it.
At the end was taking off😂