DIY SEMI, TRUCKING AND MORE • 59 seconds ago For great fuel discounts with no fuel card required, watch this video! th-cam.com/video/LjB5Y60p1qI/w-d-xo.html
Thanks a lot, I was going to do it my self but after your advice of been too hard for just one person I decided to pay for the job and have someone else do it for me. Somethings are just worth paying for rather than getting too deep into it.
I learned this lesson today I got all the way down to the fan bolts could barely reach or turn I aborted the mission and buttoned everything back up. What a pain in the ass it is. 3.5 hours wasted
You answered my questions, thanks, most of my work I do on my own to try and save money, I have the same problem and it's increasing my fuel bills so I guess it's going to the shop.
Great work man. I've decided to let the shop do the replacement since I don't have a extra set of hands but if I did I'm sure this video would of got me thru the repair.
I just replace mine on 2006 kenworth isx cummins, i did it just me, and it was not that hard to replace been one person, Works great now, Thanks for the video…🦏
Are you familiar with the housing that connects to the block? The housing that holds the fan to the block? Well a bolt on passenger side “bottom bolt” and “driver side bottom bolt” got stripped. Will I have to rethread the block?
Vaseline on the O-ring isn't a good idea. It will break down the O-ring in 6 months to a year. That's probably why the O-ring is missing on the old one (rotted and came off). Use a good silicone lubricant instead.
How's that fan clutch holding up ? I'm about to do this repair using kitmasters rebuild kit. Also doing the hub bearings as they claim most failures are due to o-ring damage from hub vibration. Thoughts
Hi guys, i have an issue with my fan clutch, on the very same truck. Fan stays on and doesnt turn off unless i park and shut engine off. It comes on specially in 10th gear and makes engine lose power. I check fan clutch for air leaks but didnt hear any. Any suggestions would be greatly appreciated thanks.
With truck running, disconnect air line on solenoid. See if it changes anything... If it never shuts off , the clutch could be bad. I d0nt know your default position. Probably default on. Also possible that your air conditioning is reading high pressure. Possible bad high pressure switch or improper charge on the a/c system .
I wanted to see how you put the bolts and small stuff in. I hate that. Making a video with the most important things I want to see. But you don't. I HATE that
DIY SEMI, TRUCKING AND MORE
• 59 seconds ago
For great fuel discounts with no fuel card required, watch this video! th-cam.com/video/LjB5Y60p1qI/w-d-xo.html
My fan clutch spins non stop. What do u think it might be? How would I diagnose?
Fan***
Moves barley to the right when I try to move it manually with my hand and doesn’t move to the left at all.
Here is a video about that. th-cam.com/video/8apahhMGCO4/w-d-xo.html
Thanks a lot, I was going to do it my self but after your advice of been too hard for just one person I decided to pay for the job and have someone else do it for me. Somethings are just worth paying for rather than getting too deep into it.
I learned this lesson today I got all the way down to the fan bolts could barely reach or turn I aborted the mission and buttoned everything back up. What a pain in the ass it is. 3.5 hours wasted
You answered my questions, thanks, most of my work I do on my own to try and save money, I have the same problem and it's increasing my fuel bills so I guess it's going to the shop.
Great work man. I've decided to let the shop do the replacement since I don't have a extra set of hands but if I did I'm sure this video would of got me thru the repair.
Right on!
Thanks for the video
How the heck did you get the fan and fan shroud out
What's the base behind that fan clutch? Is it the water pump? Or is it all part of the fan clutch, bearing hub assembly?
Fan hub assembly
@@DIYSEMI appreciate the insight 🙏 video helped a lot...
I just replace mine on 2006 kenworth isx cummins, i did it just me, and it was not that hard to replace been one person,
Works great now,
Thanks for the video…🦏
How much does it cost in these days of t680 2017 model ?
Are you familiar with the housing that connects to the block? The housing that holds the fan to the block? Well a bolt on passenger side “bottom bolt” and “driver side bottom bolt” got stripped. Will I have to rethread the block?
What kind of engine?
DIY SEMI Cummings ISM
DIY SEMI 1999 Freightliner
I don't want to steer you wrong, I'm not familiar with the ism Cummins. Mostly series 60 Detroit . Sorry bro.
DIY SEMI understood. Thank you
Vaseline on the O-ring isn't a good idea. It will break down the O-ring in 6 months to a year. That's probably why the O-ring is missing on the old one (rotted and came off). Use a good silicone lubricant instead.
How's that fan clutch holding up ? I'm about to do this repair using kitmasters rebuild kit. Also doing the hub bearings as they claim most failures are due to o-ring damage from hub vibration. Thoughts
Its still truckin
@@DIYSEMI Ty. Got mine off. Rebuilding tonight.
What size was your Allen head?
Hi guys, i have an issue with my fan clutch, on the very same truck. Fan stays on and doesnt turn off unless i park and shut engine off. It comes on specially in 10th gear and makes engine lose power. I check fan clutch for air leaks but didnt hear any. Any suggestions would be greatly appreciated thanks.
With truck running, disconnect air line on solenoid. See if it changes anything... If it never shuts off , the clutch could be bad. I d0nt know your default position. Probably default on. Also possible that your air conditioning is reading high pressure. Possible bad high pressure switch or improper charge on the a/c system .
You have to much pressure in your ac system, release some frion.
Thanks!!!
These guys are always looking for ways to either scamming people or to make profit using all kinds of stupid things 🤬
I wanted to see how you put the bolts and small stuff in. I hate that. Making a video with the most important things I want to see. But you don't. I HATE that
Maybe there is a video you could buy on that. This one was free