SPARTO Can you imagine using this thing more than once? Surely this kind of kit is hired for the job and shipped back to the manufacturer to gather dust until the next unlikely ring gear change! Just cool that it exists I suppose. Gimb
@@mzee5533 Well, the HQ for the entire Liebherr group is in Switzerland, but Liebherr was founded in Germany and most of their manufacturing facilities are in Germany, but they have subsidiaries all over the world.
i am no expert on these machines, but that hydraulic cylinder of the track press looks like it could easily excert enough force to push any kind of pin. i could be very wrong ofc
i think they go where the servicing/repairs are needed along with the engineers must be a very expensive operation flying all that stuff around all the time and engineers earning mega bucks
in industry thats unheard of. generally. those kind of devices come with a certain level of trust as well as with a service contract for getting the machine working within a day. Its a matter of mentality; they dont sell cranes they sell the ability to move stuff.
Not planned obsolescence, you have a component service life. Today the manufacturers will generally have a good idea of the approximate service life of a component before a serious failure. With a good preventative maintenance program it's cheaper to swap out those major components for new or rebuilt replacements. That also prevents un planned machine down time and waiting for parts. A swing motor or the main ring gear wouldn't be replaced after so many hrs since there's too many variables that would affect there life span. Noise and vibration while swinging the machine would still give a good indication replacements will soon be needed well before any major failures.
ImpsMyPimp load of bullshit this comment when your boss owns near a billion dollars worth of equipment you can be damn sure he has service techies on the payroll.
Always seems too clean and sterile when the Germans do it, maybe its because their Mechanics dress in slacks and their management types seem to wear grey labcoats. Will this gear work on the ground with beaten up 10-40,000hr open cut equipment and would it be cost effective?
I've been around ring gear changes on P&H 2600 shovels. Standard practice is to build a surveyed level and compacted pad of fine material first. Then walk the shovel up on it. Without that you'd have a more than tough time separating and re-installing the undercarriage.
Liebherr literally thinks of everything and has a comprehensive solution for every scenario! Nothing is left to chance!
The level of professionalism of Libherr is amazing. I wish most of the IT-Companies I worked for would have these procedures and mindsets.
Im in IT and wish to work for this company. love their machines so much. Liebherr marketing has really done so much to convince customers.
My old man is a television repairman, he's got this ultimate set of tools.
Simply awesome forward thinking company!!!!
0:45 shows that the engineers only use Windows XP and two very small monitors. How is that forward thinking?
@@syrop26 boohoo
@@syrop26 who cares that XP had only been released a few years prior to this video being made.....
WOW! Forward thinking and safer solutions. Leibherr is pushing life cycle maintenance hard.
Makes a set of snap-on seem like a great deal!
Gimblevalve i totally agree with you there
SPARTO Can you imagine using this thing more than once? Surely this kind of kit is hired for the job and shipped back to the manufacturer to gather dust until the next unlikely ring gear change!
Just cool that it exists I suppose. Gimb
Be so nice if more companies bought them xD
Excelente gran demostración para una gran maquina felicitaciones
Execelente gran demostración del contenido en aspecto a excavadoras gracias aprendí algo mas
fantastic..... I'm always working on this.thanx for the information.
German Engineering at its Finest!
Robin Timpe Liebherr is Swiss mate
@@mzee5533 its swabian
@@mzee5533 Well, the HQ for the entire Liebherr group is in Switzerland, but Liebherr was founded in Germany and most of their manufacturing facilities are in Germany, but they have subsidiaries all over the world.
Do they include a screw driver and Cresent wrench when ya buy the machine, thats all you really need. ah, maybe throw in a Harbor-Frieght socket set.
😂😂😂
I bet it can be negotiated in to the price .
Дааааааа, вот это дааааааа.
The pump lifting tool is awesome
The Amazing Liebherr
Merci liebherr
awesm 😮 i love the LIEBHERR and i am big fan
Терри, привет коллега тебе из России, в Белогорск командировку помнишь?) Самогон, баня))))
Owesome...... From Malaysia
i just want to see the track press working on an old and very weared track. It should be funny :D
Anyway, awesome clips .
i am no expert on these machines, but that hydraulic cylinder of the track press looks like it could easily excert enough force to push any kind of pin. i could be very wrong ofc
Не знаю зачем мне это вылезло в рекомендации, но прикольно.
ตลาดรถได้หลายล้านเพิ่มอีกน้อง
When a machine gets old it pay,s fore it self looks like that equipment helps
FANTASTIC
Wow...owner this excavator from KPC(Kaltim Prima Coal) ,Sangatta, Kalimantan Timur , Indonesia
Крутая техника!
German and japanese engineering it's amazing.i can see in the technology a small part from the wisdom of God
Because God was maybe using Windows XP in 2015, like the engineers are at 0:45.
Sangatta💥💥
Where is sangata
Do all of theses service tools come with the excavator when purchased?
i think they go where the servicing/repairs are needed along with the engineers must be a very expensive operation flying all that stuff around all the time and engineers earning mega bucks
Lining up the undercarriage with all those bolts must be a sonuvabitch
Encabulates? But not turbo-encabulates?
liebherr belle e fantastische masinen, sehr schön dieses masinen besten im Welt
This is awesome!!
for KPC Sangatta wow
My dozer model is pr 744,,my dozer fault code is E-2084 coming,,so the dozer is not moving,,want its solution,,,
nice tools
Brasil adoro ese canal
does Liebherr practice planned obsolescence? - serious question for the manufacturer
in industry thats unheard of. generally.
those kind of devices come with a certain level of trust as well as with a service contract for getting the machine working within a day. Its a matter of mentality; they dont sell cranes they sell the ability to move stuff.
Not planned obsolescence, you have a component service life. Today the manufacturers will generally have a good idea of the approximate service life of a component before a serious failure. With a good preventative maintenance program it's cheaper to swap out those major components for new or rebuilt replacements. That also prevents un planned machine down time and waiting for parts. A swing motor or the main ring gear wouldn't be replaced after so many hrs since there's too many variables that would affect there life span. Noise and vibration while swinging the machine would still give a good indication replacements will soon be needed well before any major failures.
Can i take this video for my youtube channel
💪💪💪💪💪💪👍👍👍👍👍👍
🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪
wow nice
Cost of excavator €6M . Cost of service equipment €1M. 😀
thanks I was wondering how much
Liebher Mega Machinnery🖒🖒🖒
Sangatta mine, Indonesia
kat malaysia ada tak?
Ini mining besar jentera pakai pya, Malaysia tk ada pakai mining besar jentera
ไฟดูดเป็ปเดียวแหละ
การก่อการร้ายสากล
ภารกิจถ้ำหลวง13หมู่ป่า
ซื้อถูกรถลูกพี่
overtaking cat and komatsu
So it's spelled with "p" not "b". Liepherr
My whole life was lie
😘😘😍😍👍👍👏👏💖💖💖
LOL i cant see anyone but their own service techs using this equipment. No ones using this stuff in the field.
ImpsMyPimp load of bullshit this comment when your boss owns near a billion dollars worth of equipment you can be damn sure he has service techies on the payroll.
Wow amazing
โกเบโก้200ประกอบระยอง
เศษเหล็กเข้าตั้งไว้ให้
Wonderful
DXM
โอมาลากไป
sangatta ku❤️❤️❤️
5:02
tinggal dimana di sangatta??
Always seems too clean and sterile when the Germans do it, maybe its because their Mechanics dress in slacks and their management types seem to wear grey labcoats.
Will this gear work on the ground with beaten up 10-40,000hr open cut equipment and would it be cost effective?
I've been around ring gear changes on P&H 2600 shovels. Standard practice is to build a surveyed level and compacted pad of fine material first. Then walk the shovel up on it. Without that you'd have a more than tough time separating and re-installing the undercarriage.
รถโหลดน้องยา
#extremeintelligence
Unit from sangata indonesia 😈
kpc bro,Kutai Timur sangatta, kebetulan pernah kerja di sana.hebat ya PT.KALTIM PRIMA COAL go internasional @sahabatOTO pekok
@@darmacora6107 iya bro ndak asing lokasinya pernah back up di sana. Tp dlu ber seragam UT
lol, does that work in a pit?
พบที่นครนายก
😯😯😯😯😯😯👌
ตีขุดยุไม่ขายให้ของ
nice :))
นั้งๆเทหนำตางสูญ
ไฟแน่นเชือน
WOW,
helmet types yu yusing
คนมันจะโดน
fucken hell i wanna work with you guys for free
บีก็ตายไปแล้วตอนนั้น
เงินของใคร
Блять почему у меня кувалда в помощь, ну и кран череповец🤔
สุราษฎร์ำวอลโว่ไม่ขายให้
Otc you better look and learn
As mulecadas não sabe nada
Good j0b
แต่พี่ว่ายัง
мой папа тут работает
Good evening and I hope you are going well good come panicking
.