Centrifugal Pump Interview Questions and Answers (Part-02) | Pump Interview Questions & Answers
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2023
- Centrifugal Pump Interview Questions and Answers | Pump Interview Questions & Answers | Core Engineering
In this video we are going to discuss about the ;
Centrifugal Pump Interview Questions and Answers part-2
Centrifugal pump interview questions
Pump Questions in Interview
Centrifugal pump interview questions and answers
Centrifugal pump skill test
Centrifugal pump interview questions
Pump interview questions and answers
Pump questions in interview
Pump questions and answers
Interview questions and answers on centrifugal pumps
Common pump questions and answers
Which questions are asked about the pump in technical interview?
Pumps questions and answers
Interview questions on pumps
Centrifugal pump questions and answers
Questions related to centrifugal pump
Centrifugal Pump Series:
• Centrifugal Pump Series
Industrial Pump Videos:
• Industrial Pump Videos
Process Engineering Series Videos:
• Process Engineering
Industrial Engineering Series:
• Industrial Engineering
Unit Conversion Series:
• Unit Conversion Series
Instrumentation Engineering Series:
• Instrumentation Engine...
Engineering Shorts Series:
• Engineering Shorts
#CoreEngineering #centrifugalpumps #centrifugalpump #pump #technicalinterview #engineering #refinery #powerplant #industry #industrialengineering #mechanicalengineering #chemicalengineering #processengineering
About the Channel :
Core Engineering is a TH-cam Channel for those Engineering Students as well as Engineers i.e. Chemical Engineer, Process Engineer, Instrumentation Engineer, Mechanical Engineer, Electrical Engineer, Electronics Engineer, Civil Engineer, etc. who wants to learn about the Engineering concepts from the scratch, wants to know the Technical How of each concept and those engineers who are already working in a Industry.
We will upload the videos related to Industrial concepts i.e. Pump, Centrifugal pump, Reciprocating pump, Compressor, Centrifugal compressor, Heat exchangers, Valves, Reactors, Plant shut down and plant start up, Process safety during plant startup and shutdown and Software used in an Industry, Industrial Engineering, Process Engineering related videos.
That is why! You must Subscribe the Core Engineering TH-cam Channel and follow our other social media handles.
Your Suggestions are Always Welcome!
Best!
Core Engineering Team
Contact us : infolearnche@gmail.com
Watch more technical videos:👇
1. Industrial Engineering Videos:
th-cam.com/play/PLrqNx2OqGF51_BYmmF_z2TrR2x0EkVH3z.html
2.Industrial Pump Videos: th-cam.com/play/PLrqNx2OqGF51IVvA2ivV1XdiMRnlWMLsC.html
3. Centrifugal Pump Videos:
th-cam.com/play/PLrqNx2OqGF513HW1AN7M9sw0kTqnO1ESX.html
4. Instrumentation Engineering Videos:
th-cam.com/play/PLrqNx2OqGF50F-gYBOccjSb9E-9F8zCi7.html
5. Piping Engineering Videos:
th-cam.com/play/PLrqNx2OqGF513CRbtuqu77IKBuIak9M3S.html
Very useful video and thank you
More then vapor pressure
Up
When the pressure of the flowing liquid goes below the vapor pressure of the liquid. 9:38
Hi, please correct me if I am wrong.
I believe the location which you have pointed as (Coupling) is actually the (Bearing Housing). Since the constant oil leveler can be seen.
And the coupling can be seen just behind it covered by the coupling guard. 3:05
Yes that's bearing housing and another one is coupling gaurd due to pointer it's bit confusing
Please when is part 3 coming?🤗🙏
Thanks for this one…
Thanks for your interest in our content. Part - 3 will be uploaded soon
Please can these same questions be asked when you’re going to an interview in an oil company as an electrical Engineer?
Not same but yes some questions could be ask for sure because it's general questions which knowledge you must have as an electrical Engineer
Hi sir, can you explain the some example for claculating new pump performance curve and pump selection, impeller and casing design with example.
Give me some reference book also.
Hello prince, I've already uploaded some videos about the pump performance curve moreover you could follow us on LinkedIn
@@Coreengineers
Thanks for your reply sir,
I want how to calculate the performance curve based on impeller diameter,
Please give me one example problem.
( efficiency, bhp, NPSHR)