My new Rolon chain is currently facing wobbling issues. Chain is moving zig zag. The rear wheel alignment is good. Front and rear sprocket is not bend, Slack tightness is correct. But chain is wobbling and can see the wobble in the rear wheel hub too, i changed the bush inside but issue still exist. If it's the bearing issue, then the whole alloy should wobble right but the alloy wheel is moving straight and there is no handling issues. Some said Rolon chain has this issue because it's very big chain compared to stock chain.
By your description, it sounds like the rear sprocket bearing is worne out. Time to replace the sprocket bearing. The wheel will not wobble as wheel is supported by wheel bearings which are separate entities.
@@MototechWanderer Ok if the sprocket bearing is worned out the wheel wont wobble right. I thought if the bearing is worn out both the wheel and the hub wobbles
If you go through my Fazer rebuilding series, you will clearly understand how the rear section of our bikes are designed. In short, wheel rotates on 2 bearings, one on each side. Sprocket sits on a separate bearing with a collar to hold it in place. In my Gladiator, the bearing had broken into pieces, chain was still good but made horrific noises. It took me some time to understand. I actually was lucky the chain did not break on me like my Fazer's incident.
@@MototechWanderer Thanks for your info bro. I will update once i change sprocket bearing. I'm using MT15 covered 40k kms. Recently i changed the swingarm of my MT15 with R15 V3 swingarm. First i thought it was tge swingarm issue but i've contacted people who changed it to v3 swingarm but none of them has this issue. Maybe it's the bearing. Do u know how much it cost
Before fixing/hammering bearing in the wheel hub ,outer surface of the bearing should not be greased, some mechanics will do brazing on the bearing before fixing so that it will be a tight fit
The bearing pits were absolutely perfect. Even with grease, the bearings sat perfectly snug. There is no way they can come out, unless hammered from opposite side. Thanks for the info though.
why have you used 40 T rear sprocket ..of fz16 ??usually fzsv2 have stock 41T sprocket....By changing to 40 t mileage will increase but little bit lag in pickup.Anyway nice content .
Can we use a bearing puller in place of hammering with a rod/screw driver for removing wheel bearing ? Is there enough space between the spacer and bearing's inner ring to slide in a bearing puller ?
I have 2017 fazer and sir i wanna see the videos on it's electric components like headlight, indicators etc. So plssss make some videos as soon as possible.
My fz rear wheel sprocket hub is broken which is attached to chain sprocket and between the wheel... What is the name of that part? Is that part available???
Fz V1 aur Fazer v1 same hai. Same sprockets hai. Fz v2.0 and Fazer Fi same hai. V1 me pichhe waale me 40 teeth rehta hai aur v2.0 me 41 teeth rehta hai. Saamne dono na hi 14 teeth hote hai.
Hi brother i saw ur every video...i myself own a gladiator ss 125 and a fazer 2.0 fi version...can u please share dat, from whr did u installed the saddle stay all touring setup on ur fazer?? I wanna do it
@@anupamdalvi7752 Message them on their FB page they will definitely reply. I got it done on special order as I was their first Fz v2.0 customer. They have the design and can easily make you one now. 😊👍
@@MototechWanderer R15 v2 sprocket in fz v2 ?? Too many sggstions from alrdy used customers for low end torque What is your sggstion sir...for high performance ????
@@MototechWanderer you are wrong! Please don't missguide if you are not sure. Refer below below and get the facts right. th-cam.com/video/-ecqjApDkQU/w-d-xo.html
I got it from Yamaha dealer. You can get them from any Yamaha spares dealer or order from the person whose number is mentioned in the video description.
Bro , kya 40 teeth chain sprocket se pickup bike ka kam ho jayega aur chain zyada din tak nahi chalega, meri fzs mein 41 teeth ka sprocket hai aur muje 41teeth ka sprocket nahi mil raha to main 40 teeth walo daal sakta hoon.
@@MototechWanderer bro meri chain set 26k km chal gai main bahut gentally drive karta hoon to approximately ye chain set 20k km tak to chal sakta hai na.
Depend karta hai chain and sprocket condition pe. Agar aap properly maintain karte ho, toh bilkul chal sakti hai. Like har 500-700 kms pe lubing and 1000-1200 kms pe cleaning+ lubing.
If after heavily cleaning the chain with diesel / petrol / kerosene. And lubing it doesn't become fine, the chain needs replacement. By default every chain had a maximum and minimum area of slack.
Mera front and rear and sprocket bearing change karna hai kitna cost aayega total bearing kitne ka ayega ya phir bahar se skf ka lelu konsa accha rahga yamaha parts ka ya skf ka ?
I had a question I have a fzsv1 2013 what's the largest back tyre I can go for without any modifications in the stock swing arm .... I was thinking about just upsizing from 140 to 150 .. will there be any rubbing? Please help me out brother I can find someone giving concrete answers
Thanks bro I solved my problem with help of your video
Glad to know the video was helpful 🙂
My new Rolon chain is currently facing wobbling issues. Chain is moving zig zag. The rear wheel alignment is good. Front and rear sprocket is not bend, Slack tightness is correct. But chain is wobbling and can see the wobble in the rear wheel hub too, i changed the bush inside but issue still exist. If it's the bearing issue, then the whole alloy should wobble right but the alloy wheel is moving straight and there is no handling issues. Some said Rolon chain has this issue because it's very big chain compared to stock chain.
By your description, it sounds like the rear sprocket bearing is worne out. Time to replace the sprocket bearing. The wheel will not wobble as wheel is supported by wheel bearings which are separate entities.
@@MototechWanderer Ok if the sprocket bearing is worned out the wheel wont wobble right. I thought if the bearing is worn out both the wheel and the hub wobbles
If you go through my Fazer rebuilding series, you will clearly understand how the rear section of our bikes are designed. In short, wheel rotates on 2 bearings, one on each side. Sprocket sits on a separate bearing with a collar to hold it in place.
In my Gladiator, the bearing had broken into pieces, chain was still good but made horrific noises. It took me some time to understand. I actually was lucky the chain did not break on me like my Fazer's incident.
@@MototechWanderer Thanks for your info bro. I will update once i change sprocket bearing. I'm using MT15 covered 40k kms. Recently i changed the swingarm of my MT15 with R15 V3 swingarm. First i thought it was tge swingarm issue but i've contacted people who changed it to v3 swingarm but none of them has this issue. Maybe it's the bearing. Do u know how much it cost
@@storymaker_____ put up a video of your swingarm swap. There is always to learn from all of you. Bearing should cost anywhere between 120-250 INR.
Link on part 1 and 3 and 4 please.. Nice video it really helps especially DIY newbie like me
Here is the whole series: th-cam.com/play/PL-oCz_Y6APcLkv5yj0XF46D61aT-goHo6.html
Before fixing/hammering bearing in the wheel hub ,outer surface of the bearing should not be greased, some mechanics will do brazing on the bearing before fixing so that it will be a tight fit
The bearing pits were absolutely perfect. Even with grease, the bearings sat perfectly snug. There is no way they can come out, unless hammered from opposite side.
Thanks for the info though.
It helped me. Thanks..
@@VictorJohn glad to know 😊🙏🏼
why have you used 40 T rear sprocket ..of fz16 ??usually fzsv2 have stock 41T sprocket....By changing to 40 t mileage will increase but little bit lag in pickup.Anyway nice content .
I use this mainly for touring. So a little relaxed engine is good for my use.
Thanks for your appreciation. Do subscribe to my channel.
@@MototechWanderer i need good performance bro..what about R15 v2 sprocket ( 15/47 ) for my fz v2 fi ?????
Suggest me the best chin kit for fzsv2 2018 model pls any one ...tel me the cost of shokbzarber price for fzs v2
Can anyone tell me valve clearance values for FZ S V2.0?
Can we use a bearing puller in place of hammering with a rod/screw driver for removing wheel bearing ? Is there enough space between the spacer and bearing's inner ring to slide in a bearing puller ?
With the given space it difficult to use the bearing puller, but you can give it a try. I did not have a puller to try it.
Gentleman I have Yamaha fz , recently I'm facing vibration and suddenly pickup dropping ,some times head light increase and drops automatically
Regulator Rectifier unit gone - Headlamp increase Decrease
Swing Arm Bush / Bearing gone - Vibration
Air Filter & Sparkplug needs replacement - Low pickup.
Bhai mujhe fz ver 2 sproket bearing ka bush nahi mil rha service center pe bhi any idea where i can get it
Local bike shops me enquire karo.
Which chain sprocket brand you suggest to go with.
Go with Rolon or Yamaha original ones.
@@MototechWanderer what is the tappet adjustment value for exaust and intake for the fazer v2 which u have
@@TheAgust Inlet : 0.08mm to 0.12mm
Exhaust : 0.12mm to 0.16mm
I have 2017 fazer and sir i wanna see the videos on it's electric components like headlight, indicators etc.
So plssss make some videos as soon as possible.
The channel is full of electrical modds. Please explore more on my channel.
My fz rear wheel sprocket hub is broken which is attached to chain sprocket and between the wheel...
What is the name of that part?
Is that part available???
That's the rear wheel hub.
@@MototechWanderer can i get that part whats the cost
I think it was around 800-1200 something.
Sir fazer v.1 ka sporket or fz v.1 ka sporket same he? or different heto kya Kya difference he answer kardo please
Fz V1 aur Fazer v1 same hai. Same sprockets hai. Fz v2.0 and Fazer Fi same hai. V1 me pichhe waale me 40 teeth rehta hai aur v2.0 me 41 teeth rehta hai. Saamne dono na hi 14 teeth hote hai.
Hey bro can you suggest some best tool kit to repair FZ-S V2.
Which tool kit do you use?
All my tools are listed in the description. You can check them out and order what you want.
can you please suggest me a place to get Yamaha FZS - 2018 model spare parts ?
Check the video description
Hi brother i saw ur every video...i myself own a gladiator ss 125 and a fazer 2.0 fi version...can u please share dat, from whr did u installed the saddle stay all touring setup on ur fazer?? I wanna do it
I had bought this from Nexus Gear. You can search their Facebook page or visit their website - www.nexusgears.com/
@@MototechWanderer thannx for your valuable reply...keep growing..,💜💜
@@MototechWanderer is it available at that site for fazer or u have fitted of another bike??
@@MototechWanderer i have searchd in dat pag....m jst getting parts for yamaha fz 25
@@anupamdalvi7752 Message them on their FB page they will definitely reply. I got it done on special order as I was their first Fz v2.0 customer. They have the design and can easily make you one now. 😊👍
Which is the best chain for fzsv2 for speed gud for engne
Original Yamaha Chain or Rolon chain.
R15 v1 sprocket direct fit in fz v2?(14/42)
Now i am using fz v1 sprocket,
Any ideas?
Nope. Won't be a direct fit. If you need more pickup, look for Pulsar 13T front sprocket.
@@MototechWanderer R15 v2 sprocket in fz v2 ?? Too many sggstions from alrdy used customers for low end torque
What is your sggstion sir...for high performance ????
Two bearings for a wheel yeah ?
Yes
It would be better if u mentioned price of spares aswell
Prices might change with time. Part numbers can be used as reference to get price list from local showrooms / spare shops.
Since you did this all by yourself I have one important question to you!
The PCD of rear sprocket of FZ and the PCD of R15 V2 are same or not?
They are not same.
@@MototechWanderer Thanks! I was about to procure fz chain sprocket for my Yamaha R15 V2 after doing all length calculations.
@@MototechWanderer you are wrong! Please don't missguide if you are not sure. Refer below below and get the facts right.
th-cam.com/video/-ecqjApDkQU/w-d-xo.html
V3 k spoket v2 mai dal sakte hai
Haan daal sakte hai.
sprocket mounting bolts link bro please?
Bro Please Provide link
I got it from Yamaha dealer. You can get them from any Yamaha spares dealer or order from the person whose number is mentioned in the video description.
Hello my Fz rear tire bend towards left . Whats to do . Ithink the sringamm is bend
First check the allignment properly with the chassis (not with mudflap). If you still feel it's off the axis, replace the swing arm.
But alignment lines are correct both side
And my rpm meter not working .is there any sensor for that
@@favazk5705 remove the Speedometer console plug and spray some WD40 on the pins and scrub with a tooth brush. It should work.
Bro fz v2 rollon chain good or bad?
It's very good. Just make sure the sprocket size and chain link count is exactly same as stock. 👍
Could you please tell me the bearing number for sprocket, front wheel and rear wheel for FZ S V2.0?
Need to check. I have lost the packets.
Front and rear wheel bearing number - 6202
Sprocket bearing number - 6004
So total 3 bearings?? For rear?
Yes, 2 wheel bearings and 1 sprocket bearing.
How much is the cost of axle nut and bolt?
Don't remember exactly, but under 200 INR.
Bro , kya 40 teeth chain sprocket se pickup bike ka kam ho jayega aur chain zyada din tak nahi chalega, meri fzs mein 41 teeth ka sprocket hai aur muje 41teeth ka sprocket nahi mil raha to main 40 teeth walo daal sakta hoon.
Pickup halka sa kum hoga. Chain life same rahega.
@@MototechWanderer bro meri chain set 26k km chal gai main bahut gentally drive karta hoon to approximately ye chain set 20k km tak to chal sakta hai na.
Depend karta hai chain and sprocket condition pe. Agar aap properly maintain karte ho, toh bilkul chal sakti hai. Like har 500-700 kms pe lubing and 1000-1200 kms pe cleaning+ lubing.
Generally sirf front sprocket jaata hai ... Bas usko replace kar lo.
Bro,but meri bike ki chain ke roller losse ho gaye hai uski wajah se chain noise aata .
any solution for uneven chain slack???
If after heavily cleaning the chain with diesel / petrol / kerosene. And lubing it doesn't become fine, the chain needs replacement.
By default every chain had a maximum and minimum area of slack.
Chin spoke cost pls yamaha original?
1500-1800 INR
Bro how much cost for sprocket hub
I don't remember correctly but it must be under 600 INR.
You should be mention to bearing parts number ☺😊
Wheel Bearings
93306-252XG
93306-252YH
93306-202XT
Sprocket Bearings
93306-054YA
93306-054Y5
Oil Seal Wheel
93106-22808
Oil Seal Sprocket
93106-26801
What is the cost of swing arm bro?
Also what is the total cost of the work you done?
Around 3000 INR in my city
Back tyre bering number. .?
Check the video description, everything is mentioned.
What is the difference in top speed
Bro tell me the difference plz
Almost no difference in Top Speed. It will just keep the highway cruising lil relaxed.
Thank you brother
Bro can u provide number of sprocket bearing for fzs v2
Part No. : 93306-054Y5
Can you tell me the cost of both the axle rod
As far as I remember they were some 100-200 INR each.
As far as I remember they were some 100-200 INR each.
@@MototechWanderer thnks
Swing arm cost pls ..new one
2000-3000 INR
Please tell me bearing size and number or company name..?
Check the description of the video.
Cool bro
Thanks bhai. 😊
This chain gives better mileage?
Reply me bro
I won't say that. This chain will not make any significant difference other than lower RPM for a given speed and slight drop in the pickup.
This chain gives beter milage? Suggest best chain
Thanks now I am subscribe u r chanel gud work bro ..shokbzarber cost chappagalara...
Thanks now I am subscribe u r chanel gud work bro ..shokbzarber cost chappagalara...
Total cost batao sab bearing ka please reply fast
Mera front and rear and sprocket bearing change karna hai kitna cost aayega total bearing kitne ka ayega ya phir bahar se skf ka lelu konsa accha rahga yamaha parts ka ya skf ka ?
Bearing 100 Rs each. Chain speocket set 1700 INR approx.
I had a question I have a fzsv1 2013 what's the largest back tyre I can go for without any modifications in the stock swing arm .... I was thinking about just upsizing from 140 to 150 .. will there be any rubbing? Please help me out brother I can find someone giving concrete answers
140 is stock. 150 is still manageable without any modifications. 150/60 R17
Bhai bearing size kya h?
Not sure. The bearing part numbers are in the description.
Sir aap ne rear wheel bearings no kayu nahi bataya
Sab video description me hai.
chains pocket bearing number
Everything in video description
Bro bearing price?
100 INR each.
This chain supports fzs v2
Yes it does.
Please sab ka price bata do please
Swing Arm : 2800 INR
Sprocket Chain set : 1600 INR
Beerings were approx 50-100 INR per piece.
Super
Thanks
Never replaced the sprocket nuts.. 40k+ kms
Actually not needed. In my case it got grinded by the chain at high speed.
Neet work
Thank you
Don't forget to subscribe to watch more such DIY videos.