This video amuses me because I made the same kind of holder for the exact same kind of controller the other day. I went about it differently and I did it in fusion 360, but we both did it in like 5 minutes.. I did add bit of a taper to mine so that the remote tilted outwards so you could reaching behind and grab it.
Thank you yes I have been improving. Playing with different settings. I have done a lot research. Some people say that even the material brand would affect the quality :(
Wow... That is fantastic... Well done sir... Am impress of your work on solid work .. I like your teaching about this software... I want to ask your something important but I don't know to tell u.... I want to learn how to work on solid work because am new in area of design or using of this software... I humbly request you sir to teach how to work on it ... I will grateful sir
Hello to measure the radius, you can estimate, mark where start the circle in the corner of the remote in X and Y and intersect them to find the center of the circle, thank you
So you make a tutorial on how to design and 3d print using solidworks but dont show us what plugin you need nor how to get that plugin nor how to use that plugin in Cura?
Thank you for video - it's nice. Please check, the mechanical part of your printer. One week ago a have got my Ender 3 (my first 3D printer ever) and spent a Day for assembly, checking and calibration. A lot of parts (even preasseblied) was overtorque or missleveled e.t.c. And now I'm really satisfy with quality. If you want, can give video with detailed instructions, that I have used for it (there russian languedge, in case If you familiar with it :))
Thank you for your comment yes I noticed some preassembled parts in my ender not leveled but maybe I still have some more to check, put the link here I will take a look. Thank you very much
I finished my homework project because of you .Thank you so much. Thank you video
Glad to hear that you are welcome
This video amuses me because I made the same kind of holder for the exact same kind of controller the other day.
I went about it differently and I did it in fusion 360, but we both did it in like 5 minutes..
I did add bit of a taper to mine so that the remote tilted outwards so you could reaching behind and grab it.
That is so coincidence. I need to improve mine. Lol. Glad to hear your story thank you
Awesome tutorial. Thank you!
Seems like either your nozzle temperature or flow is incorrect based on the print, but great video!
Thank you yes I have been improving. Playing with different settings. I have done a lot research. Some people say that even the material brand would affect the quality :(
@@quikdiy7134 too much heat maybe?
good work
Wow... That is fantastic... Well done sir... Am impress of your work on solid work .. I like your teaching about this software... I want to ask your something important but I don't know to tell u.... I want to learn how to work on solid work because am new in area of design or using of this software... I humbly request you sir to teach how to work on it ... I will grateful sir
Thank you for the compliment. I will do more videos soon
Awesome!
could you use the Ultimaker software with the Creality 3D printer?
Hello yes actually you can see it in the minute 6:29 thank you
if you print horizontal more fast than vertical
Thank you for you recommendation i will try that
How you calculate the 4.50 mm fillet radius??
Hello to measure the radius, you can estimate, mark where start the circle in the corner of the remote in X and Y and intersect them to find the center of the circle, thank you
So you make a tutorial on how to design and 3d print using solidworks but dont show us what plugin you need nor how to get that plugin nor how to use that plugin in Cura?
Josh you are right sorry it was our first video, I will make a new one including that, thank you for your feedback
@@quikdiy7134 Thank you! Id appreciate it!
Thank you for video - it's nice.
Please check, the mechanical part of your printer.
One week ago a have got my Ender 3 (my first 3D printer ever) and spent a Day for assembly, checking and calibration. A lot of parts (even preasseblied) was overtorque or missleveled e.t.c.
And now I'm really satisfy with quality. If you want, can give video with detailed instructions, that I have used for it (there russian languedge, in case If you familiar with it :))
Thank you for your comment yes I noticed some preassembled parts in my ender not leveled but maybe I still have some more to check, put the link here I will take a look. Thank you very much
can we increase the speed of printer
what is the name of the 3d printer?
Hello this is ender pro, you can search in amazon probably cost about 200€ or $, thank you
What name 3d printer
Ender 3d
Cumprimentos desde Funchal bro, não logro escrever-lhe por DM. Obrigado
Desculpa ja não moro lá, tou na Alemanha quikdiy@gmail.com, qualquer coisa, saludos
Lmao this dude "sketching" his design
😜😁
The music is very annoying
😂 I thought it was good i will consider it for next videos