How to replace a lever selector / gear linkage on your Renault.
ฝัง
- เผยแพร่เมื่อ 20 ก.พ. 2018
- Today we are going to replace the selector lever on my brothers Renault Kangoo. If you suddenly missing all your gears on your Renault then please watch this video.
This is the same on the 19, Clio I, Clio II, Espace III, Kangoo, Laguna, Megane, Scenic, Thalia, Twingo from the same area
Parts/Tools used:
Amazon affiliate link
www.amazon.co.uk/shop/thedutc...
*Disclaimer
We, The Dutch Garage, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not The Dutch Garage. - ยานยนต์และพาหนะ
this is great! my 480 has the exact same system and it's got a lot of play right now. So now i've got a good idea on how it's all put together
That's great to hear. Some brands use the same system.
@@TheDutchGarage yeah well my volvo is basically a renault in terms of mechanicals
Congratulation Dutch! I like your video, excelent bro!
Thanks from Argentina
Well thank you!
Great video, nice close ups and good narration.
Thanks! Also thanks for watching.
Excellent video. Perfect explanation to fix this problem. I learnt a lot. Thank you.
Glad to help.
Perfect video. Good explained. Thank you
Thank you so much! From Argentina
No problem, we are here to help each other.
I do not speak english. Saludos desde Argentina y gracias por el vídeo!!!
No problem!!
Gracias por la descripción amigo ,saludos desde Argentina
Felicitaciones, saludos desde Colombia. Muy bien!.
No problem!
THank you so much, from mexico
Your welcome!
Thank yOu, from malaysia.
No problem! Thanks for watching.
altyazı dan söylediklerin anlaşılmıyor ancak yaptığın aşamaları anladım gibi :) eline sağlık. güzel video olmuş
Thank you, Appreciate it!
Excellent video
Thank you.
Thanks sir l am change logan gear shift ing bush good information video
Thank you, and good luck with the replacement.
Desde "ARGENTINA" por muchos más vídeos como este , muchas gracias!!!
Hallo, our Queen is from Argentina! Thank you for watching!
Thank you soooo much. put them on wrong today. Reverse was 1st gear hahaha
😂, and then let you friends drive it.
thank you i having this problm on my Renault
scenic
Its really common. Thanks for watching.
Thanks a lot much appreciated
You are greattt
Very good video ......................
Thank you.
gracias por el tutorial.. tengo este problema con mi laguna
No problem, i hope you can fix it.
The seal comes off the other end of the little linkage (opposite to plastic bush)
Some play is also exaggerated within the 12mm shaft (hole end of the linkage)
Mine has just 0.06mm of slack at the joint but this translates to alot of play at the gearstick (left and right movement when in gear)
Super Thank you so much!!!!
No problem.
I have Reynold ClioWhen I put on the river is make nice The another Gear is okay. What does your advice
Thank you very much! I'm having problem on Clio mk 1 (1997), it is dificult to put it in 1st an reverse. Can you do a repair of gear selector (replacement of the bushings)?
If the situation is there the of course i will make a video. But i don't think it will come anytime soon. But i can guarantee you that it isn't that difficult. This gear selector is the biggest pain of that whole assembly.
Queit clear thanx a lot
No problem.
fantastic
👍
Great vid, very informative & comical in places. I notice on my Renault Scenic mk1 2002 that the large spring that you can see in this whole gear linkage set up, clearly visible at 5:10, that has partly sheared off, so it no longer doing it's job. Any chance you possibly know the part description or even the spare part number, so I can source one here in the UK. Also, my scenic has never had one of those large plastic dust covers that cover the whole gear linkage set up. Love finding these style vids when I have to tackle stuff on my Renault. Would be whole lot of frustrated hair pulling out work without them lol. Many thanks in advance
First of all thanks for watching. Its a gear selector spring, I think this is a dealer only part. unfortunately I cant find the part number. But just call the dealer and they probably have them is stock. Sorry that I cant help you any better.
Hey, thanks for the reply. That is more than enough help, am sure I'll be able to track one down now. Keep making these great vids, def helping all us d.i.y mechanics save a few £££
excelenttt
Thank you.
Hola el desgaste de esa pieza podría se la causa de que solo entre la quinta y las otras no
There is alot of play on my gear linkage. Would this also help for that? Thank you 😊
Thank you
Your welcome.
Los que no sepan, tambien sirve para clio renault tiene muchos modelos similares en cuanto a la mecanica, los modelos de autos solo cambian por fuera
Nice vid. I also have a kangoo 1.2 16v . Would you know where the speed sensor is located in that engine? Thank you
It probably some ware in the gearbox near the axle shaft.
Hello! Nice video. Thank you. I am considering a 2002 Kangoo that has trouble getting to reverse gear. Could it be a linkage problem or do you know of transmission problems with this car? Thanks in advance for your help.
I do think there is a problem with the linkage some ware. I don't know about reverse issues.
@@TheDutchGaragethanks for taking the time to reply! All the best to you!
Ur brother was fishing you😮
Could this be the cause for losing just one gear? It's hard to shift into 5th gear in my laguna, but when I eventually get it in gear, it pops right out.
I dont think so. It sounds more like an worn syncro.
Bravo ,,👍🇩🇿🇩🇿
no problem!
Top video! Ik heb een Clio2 uit 2005 met erg veel speling van de versnellingspook. Lost deze vervanging mijn probleem ook op? Mvgr., Arthur
Hallo, de kans is erg groot dat het probleem daardoor komt. maar er zijn meer bussen waar ruimte in kan zitten.
Could this bi the reason of grinding if it's loose, but not like this?
I dont think this is a reason for gear grinding. Gear grinding most of the time is wear or a bad clutch, master or slave clutch cylinders.
@@TheDutchGarage Alright, thanks
I have a 2008 Clio 3 1.5 DCI, the gear stick will be difficult and stick in either 1st or 2nd when shifting gears, but not all the time, is there a common problem as I have no idea thanks Ian
you move the selector back and forth, how i should konw to orginal position for the selector let us say it was in neutral bevor repair, how to be sure after repair it will stay at neutral?? please help
It does allign itself, don't worry to much about it.
@@TheDutchGarage ooh thank you very much
Is this a similar assembly on all Renaults??I have lost gears on my 2001 Renault Scenic RX4 The clutch still feels like it is operating but the gears cannot be selected I enjoyed your video by the way very informative and entertaining
Yes, they use the same part numbers. Installation will be the same or almost the same.
You made an Aussie very happy because its looking like this is the problem and how to solve I will definitely be watching your videos from now on
Dont force yourself to watch this garbage :-) but still i appreciate it.
how to ajust the gears after the job? my car lose the reverse
You can't do that, adleast not that I know of. If you can't find the reverse maybe some other bushings are also worn.
Hoi heb een clio 1.2 uit 99 op het oog voor 200 euro. Alleen schakelt de auto soms niet in 1 en 2. Alsof de bak de versnelling nirt wilt. Dan laat je koppeling los en niet goed in een en dan schuurt die.
En een ander moment schakelt die prima 1 naar 2 bv
Is het ook zo n probleem als van uw vid?
Het zou heel best kunnen. Maar het kan ook zeker wat anders zijn. Je zou dan toch echt even onder de auto moeten kijken.
I loosed the bushing when dissasemble. What is the dimenson of bushing? Inside is 8mm outside is?
you mean the white thing? i don't know, maybe 13/14mm?
Not plastic thing, metalic peace - like a "pipe". I could mesure, but now i cant get to garage where i have car, i would like to have prepare for when i get material for repair.
Could you give me a time stamp were the part is visible? I don't know what you mean... Sorry.
You remove it from circle at cca 5:50, I think you holding it in hand.
merci
You are welcome.
i have renault kangoo.is this the problem,that i cant get into 5 gear?
I don't think that is the case. if this thing is lose then you would have no gears at all.
so must be something with gearbox.thank you for your help.
@@tomazflajs The chance is really great.
WELK jaar was de Renault Kangoo? bedankt
Durf ik niet te zeggen.
YA ME SUSCRIBÍ.
Welke maat borgring was dat?
Helaas dat weet ik niet meer.
Hmm denk dat dit weer een reparatie wordt op de Hornbach parkeerplaats 😅🤣
7:36 what is 'this' name? I need to buy/order it too.
Hallo, Gear Lever Selector Bush OE number: 7700872205. I hope it helps you out. Thanks for whatching.
it always tears up , it's like single use