My son's car is a 2007 Acura TL and we tested the solenoid from watching your video and didn't hear the click on his driver side light. The headlight works with the low beams on but the driver side will not switch to high beam. Since we have figured out it is the solenoid do we have to change out the whole headlight or is there an easier, cheaper fix?
Ive experience this sir,ther is no high beam light.,the low beam is ok it function correctly.,but im realy confused w/ the wire coming from ballast or low beam side going to high beam connector,so the problem maybe solenoid? The one u do earlier in ur video.,i checked all the fuses and relays and switch but it is ok.
Hey man.m, i have an acura tl 2007 & when i turn off the car completely the day headlamps stay lit up... brake lights off. Just the day lamps stay on? Do you know why this may be?
I wanna change my headlight. However, I’m a lil confused. Is the high beam and low beam two separate bulbs. Do I have to buy four bulbs (2 high beams and two low beams)? This is for Acura TL, or is it the same bulb the projects high and low beam?
IDABAYAREA650I This car had the same problem. Had to change the HID bulb. On 2004+ Acura's you have to remove the bumper to replace the bulb. It's not a terrible job. I have a video: th-cam.com/video/f_7v-7YDsFs/w-d-xo.html
Hi I was wondering if you can help me, I have a 2007 Acura TL and recently my bulbs went out and bought new ones, after I replace them I notice my high beam wasn’t function prior to that it was. I check the fuse I can hear it’s clicking for the hi and low beam fuse and it’s getting power, the only thing I’m not hearing the solenoid if I push my stalk forward to engage the high beam. Now with the headlight off I can pull on the stalk to flick the high beam and it work. So I’m a little bit loss?.
ive checked fuses and their fine , replaced "fog/daytime light bulbs and still nothing . i did notice today that one headlight turns on and off sometimes but the other stays off.
Thank you! Appreciate the feedback. I have a number of TL vids coming and will add to this playlist: th-cam.com/play/PLl6xt4Pyay3DVTRVH89EwpudeqDk4ivyI.html
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
My son's car is a 2007 Acura TL and we tested the solenoid from watching your video and didn't hear the click on his driver side light. The headlight works with the low beams on but the driver side will not switch to high beam. Since we have figured out it is the solenoid do we have to change out the whole headlight or is there an easier, cheaper fix?
Ive experience this sir,ther is no high beam light.,the low beam is ok it function correctly.,but im realy confused w/ the wire coming from ballast or low beam side going to high beam connector,so the problem maybe solenoid? The one u do earlier in ur video.,i checked all the fuses and relays and switch but it is ok.
Hey man.m, i have an acura tl 2007 & when i turn off the car completely the day headlamps stay lit up... brake lights off. Just the day lamps stay on? Do you know why this may be?
Where do I find that switch solenoid on a 2002 Acura TL?
How do you know if you have a bad ballast
I wanna change my headlight. However, I’m a lil confused. Is the high beam and low beam two separate bulbs. Do I have to buy four bulbs (2 high beams and two low beams)? This is for Acura TL, or is it the same bulb the projects high and low beam?
I'll have a video, probably by tomorrow, showing all the bulbs and part numbers for the TL.
Can you do a wheel alignment for the tl
How do you replace the switch if it doesn't work?
My high beam fuses keep blowing any suggestions???
Is there a way to change JUST the bulbs? Cause i have to turn on my headlights on and off none stop until the right hid turns on its so aggravating
IDABAYAREA650I This car had the same problem. Had to change the HID bulb. On 2004+ Acura's you have to remove the bumper to replace the bulb. It's not a terrible job. I have a video: th-cam.com/video/f_7v-7YDsFs/w-d-xo.html
CarsNToys Thanks really appreciate it!, ill let you know if in need of help of something els haha
IDABAYAREA650I
Glad to help
Hi I was wondering if you can help me, I have a 2007 Acura TL and recently my bulbs went out and bought new ones, after I replace them I notice my high beam wasn’t function prior to that it was. I check the fuse I can hear it’s clicking for the hi and low beam fuse and it’s getting power, the only thing I’m not hearing the solenoid if I push my stalk forward to engage the high beam. Now with the headlight off I can pull on the stalk to flick the high beam and it work. So I’m a little bit loss?.
when i flash my high beams I can hear the noise but they wont turn on. what could be the problem?
Both sides? What kind of vehicle?
yes 2004 acura TL base
ive checked fuses and their fine , replaced "fog/daytime light bulbs and still nothing . i did notice today that one headlight turns on and off sometimes but the other stays off.
Kelly Martis Were you able to find out the problem for the headlight
The loud noises at the start and end of this video are distractions.
Sweeeeeeeeeeeeeeet Bro ( JD TL-S ) Loves your videos :)
Thank you! Appreciate the feedback. I have a number of TL vids coming and will add to this playlist: th-cam.com/play/PLl6xt4Pyay3DVTRVH89EwpudeqDk4ivyI.html
why didn't you use your car battery then