Rollerskate Wheel & Bearing Replacement DIY StrictlyDerby.com
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Due to a lack of decent roller skate repair videos on youtube, we at StrictlyDerby.com decided to make a series of do it yourself videos to make you comfortable working on your skate.
Whenever we travel to bouts or practices it is the number one question we always get. We have realized that most girls are not comfortable doing it themselves and they are more than capable. Feel free to comtact us at the shop if you have any questions or are interested in having us come to one of your bouts, practices, or put your team on our sponsorship program.
Thanks,
Strictly Derby
www.strictlyderby.com
strictlyderby@gmail.com
1-855-SDDERBY
In this video:
Bones Bearing Tool- strictlyderby.c...
Generic Y Tool- strictlyderby.c...
Backspin Beast Mode Wheel- strictlyderby.c...
Bones Reds Bearings- strictlyderby.c...
Vanilla Renegade Skate- strictlyderby.c...
maybe you don't know a thing about washers or maybe you forgot to mention there are 2 sides to them, one side is rough and one side is smooth and polished. for those wanting to 'not' destroy their bearings, it's best to put the polished shiny side towards the bearing and the unfinished side towards the truck.... you can thank me later. ~ kev.
If they don't come with washers is it necessary to install them? And if so what size should I use? I'm putting together my first pair of skates so this sort of information really helps!
Thank you!!! 🖤
Thank you i need to know where orientation was correct.
@@ZoeInWonderland95 Even on skates that come with washers, they're not ABSOLUTELY needed. To use them or not is up to you. The size depends on your axles. Axles only come in two sizes...7mm or 8mm. Look at the bearings you have. You will see 608, 628, etc. or 607, 627, etc. That last number - the 7 or the 8 - is what denotes your axle size. If the number ends with 8, you have 8mm axles...likewise, if the last number is a 7, you have 7mm axles.
Is the rough side going to “sand” wear down the axle? Mine look pretty worn
NEVER use the axle! 44 years of skating, I've seen that damage more bearings - AND the axles themselves - than screwdrivers.
Also, if you're serious about skating (derby, artistic, or otherwise), you'll also have a bag with tools and some basic extras on hand at all times. Fanny packs and drawstring backpacks are great for holding items when skating outdoors. Regular backpacks or tote bags are easier for rink skating.
I just bought my first pair of skates this week. The first thing I did was find the right tools, adjust the wheels, trucks and stoppers, then put the tools straight into my skate bag.
@@kimeldret2491 As it should be! 🙂 Have fun and roll on!! 😁
working on the next video. Bearing service, cleaning, and lubing. Thanks for the feedback.
"All the stuff is for sale."
Yeah... Including the domain... $2895
Lmao
Thank you for the close-ups and for the no tool method. Also for what to be careful with (e.g. denting bearing shield).
Thank you for the tutorial. I have the push/pull tool on order with new bearings, but i really couldnt wait to try the new wheels i got!
Thank you so much for the bit about removing the bearing with the axel. You saved my life with that.
thank you so much i am in derby and i just got new wheels but i dont have the push pull tool and i needed to get the barring out this helped me so much. thank you again
what kind of bearings do you recommend? and wouldn't you put in a middle piece between the bearings inside the wheels? or doesn't it matter at all?
I was also wondering about spacers.
Thank you for this video!!! Very well explained and easy to follow. Keep them coming.
Omds this helped so much, just got some new Rio light up wheels and my bearings didn't go in easily, but now if I over tighten them it out the bearings in really easily, tyyyyy
your video is so good i m new of roller skates. thanks.
Both my skateboard and quad skates have the 'spacers' between the bearings...are they needed?
Thank you so much! This helped me so much!
i got some outdoor wheels for my skates and I was freaking out cuz the bearings came separately and I don't have a bones bearings tool but this video helped! thank you!
Why there are no spacers between the bearings?
That was a cool trick for putting the bearings back on without the bones 🦴 tool in the new wheels
Do you need spacers? Please answer! I changed my wheels and kept the spacers now my wheels are sliding and squeaking. Without the spacers they don't. Do i need a different size spacer? Is that a thing?
Through waiting Force the tolerance value for the bearings as it relates to metal is the value will go back to shape and within its dimension
What about a rotating wheels for even wear video 👍
Well done!!! You explained it perfectly. Thank you.
I could use your advice. I replaced the wheels and bearings with outdoor gummies but it seems now one side of the skates doesn’t have enough axel. Not even enough to use the nut & bolt down .
Thank gawd for this video, I agree that there is a lack of high quality derby gear videos out there, do some more! :D
That was a great video. I subscribed because there is a lot I need to learn about skates & maintenance etc. Thanks. 👍☮️
Great video. Looks like the links to products don’t work anymore.
if u take the bearings out on the axle the bearings will bend
And with cheap skates....so will the axle! :(
Maybe a vid on how to grease bearings properly. If you haven't done one already. Just came upon your vid today. Thanks for the info.😁1/28/20
What are the best bearings for speed
And roll...looking for new wheels and bearings...
Where are the bearing spacers
Thanks for the info! Very helpful
So do we just ignore the spacers that coke with the bearings
I need a washer for my impala quads. What size of washer do I need?
Gret video.
Kinda curious why no bearing spacers?
I get that the wheels have a flanged design for the bearing to stay seated against the wheel. But that nut is pressing only against the outer bearing and nothing else.
No spacers because wheels don't actually need bearing spacers. That's an individual choice. It has nothing to do with the nut, but some speed skaters swear they can go faster with the spacers than without them. When .002 seconds counts in a race...it's a good thing to have. If you're hitting the rink or your neighborhood, they're kind of useless and only gets you to spend money on things that aren't necessary. I'd much rather spend money on a complete set of spare axle lock nuts than 4 bearing spacers. As far as the nut pressing against the wheel, that would be washers - not bearing spacers - you'd need if you wanted something in between. Bearing spacers go between the bearings...not against the axle lock nuts.
Great vid man. Um can the wheels be dynoed for top speed vs torque and then grip? What about lighted wheels?
Where do the washers come in? My bones came with washers and a metal spacer-looking thing.
What are some good bearings to buy..... and where can i find some nice wheels. 62mm 31mm
What is the best bearings for roller skate?
I don't have a bearing tool, help??
Hello! Is it necessary to put metal rings (washer??) between bearings and lock nuts? I realised that they are making a noise when driving. Maybe it would be better if they're made of rubber or something. Thanx!
+Hela Helena ummm no. metal and shiny side towards the bearing always, or run the risk of destroying the bearing race....
Excellent vid. Thanks!
THANK YOU SO MUCH I THOUGHT ID BROKEN MY SKATES
Wait a sec... Doctor Who shirt! Nice. That aside, great vid! :)
great video!!! helped me a lot! thanks!
Hi we here who have a mechanical engineer which will mot insert bearings without bearing spacers why dont ypu mention that fact.
Thanks for the info! This is super helpful (even in 2018, haha).
Hello thank you for sharing. My bearing on the outer part of my wheel dose not fit snug like my old bearing that I replaced. So now I have no free spin?? If I loosen the nut it is to loose :/ Are all bearings the some size??
Fiona L having the same problem
roller skate wheels are the same with skate board wheels??
Thanks this helped a lot
I want to see "How to Stretch a Ridell Boot near the top of the toe area?
Waste fellow
Awesome, thank you...😊
I know this video was posted a while ago but can anyone tell me if it is OK to do That with pliers
hi!,a question, longboard wheels is the I put my quad roller skates ?
You can put skateboard wheels on roller skates - and vice versa....just remember that some skateboards have a riser to allow bigger wheels, such as 70 or 80mm wheels. Most roller skates will only comfortably hold a 65mm or smaller wheel. A 70mm wheel will fit on some, but many have issues when it comes to turning if their trucks are loose because the plate of the skate will "scrape" the taller wheel.
what is tool name?
THANK YOU THANK YOU THANK YOU
It just took me WAY too long to figure out that you turned the wheel after installing the first bearing without the tool.
Is your website shut down? Did y'all go out of business?
can u put wheels like that on a skateboard for cruising
Yep!
hey does anybody know if I switch the wheels on kids roller skates to buy adult roller skates this if it will matter or do I need adult roller skate wheels for quads
iNeed help
I found a vanilla renegade on an online shop that says its size kids 4. Would that be the same as a men's 4?
clavicle86 No
A size 4 child's IS the same as an adult 4. It's once you hit size 5 that it begins to differ a bit as size 5's are considered the 'smallest adult" size, even though many children's shoes go up to a size 6. The main difference between a child 5 and adult 5 (or 6) is that children's feet are typically more narrow than an adult's foot.
Could you use an 8mm alan wrench?
update: yes you can
Mmm está chevere el video lo malo es que mi ingles no es tan bueno
YAAAASSS EXPLODING TARDIS
Well, Only if we could see the proper way to oil up your roller skate bearings.
Good~
I wish I would have watched this before I dented my new bearings. Now I know.
There are some other channels that are good for cleaning bearings. But only the COLORED ones! The cheap all metal ones don't open, but almost no one mentioned that and I thought I was going crazy.
@@lynnlynn9124 I am glad you said something. Some of those little details make a big difference.
@@jodygirl I only recently started skating outside everyday and taking care of my wheels and bearings. I thought bearings were either metal or ceramic, with no clue about most common knowledge. Tbh I didn't know that the wheels had bearings that were sold separately until I wore my wheels down to the size of munchkins. I just got a set from eBay Cheap Skate Wheels and they have been the best thus far. The bearing cleaning vid on Indy jammy Jones channel is good, but I watched 4-5 vids and I only 1 mentioned that the solid metal bearings don't come apart. So much info I was unaware of.
Where are y'all located ?
I got oil with my new wheels.
Very bad