Mafell MT55 Demonstration.
ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2010
- Introducing the new MAFELL MT 55 cc plunge cut saw system, featuring the world quickest blade change, in 3 simple steps, and a cutting depth of 57 mm, with the innovative swivel system there are so many possibilities.
- แนวปฏิบัติและการใช้ชีวิต
Ok, I bought this saw and every accessory to go with it.
I am so impressed with the quality of every part of the saw and kit. Every detail has been thought through. The blade change is amazing they have even sealed the gate and it feels like opening a Mercedes door. The blade has absolutely no Wobble It's so precise. The plastic used is really high quality. The metal is tough but light. The main weight is the motor, but it's well balanced and seats nicely on the rail, with no tilt. The gauges are far better than that on the Festool, they are higher up and easier to read and adjust even at tilt and done with a single knob. The red guide on the front moves with angles so you always know the cut line -on or off the rail. So much more to mention, but I forget. Yes it is a more expense than the Festool but it really is better engineered and you can feel it immediately. If anyone wants to know anything about it, let me know.
Hey. how are you liking your MT55 these days?. just out of interest, what type of materials do you mostly cut with yours?.
i want one specifically for cutting 15mm 8x4' sheets of glossed veneered ply (double sided), do you reckon its up to the task? (as in nice clean cuts both sides)
I bought this. Does not disappoint. Perfect cut every time. Blade change has to be seen to be believed.
excellent video. was just about to buy the festool since seeing this video have ordered the mafell.
Great video
Thanks
John
Thank you Europe for still making Quality, I ask, can we in North America ever make quality again. This product make DeWalt look like a toy. Thanks for the Vid.
Rob From Canada
amazing!
I would like to see a Mafell company design a new mt 55 sliding on kss guide,since they released a mafell mf 26 which has identical motor and similar base.Looking forward to it.
I dont see any Mafell here in Western Australia but a friend says you can get it from Sydney tool in Eastern States. I have the festool plunge saw didn't even know about Mafell. The zero chip is fantastic because I get little chips tiny on malemite.
I would like to see chip free in malemite. But now I just cut on ply wood and varnish. I like their jigsaw too.
Хорошая пила, несомненно
i bought one last week very happy about it scoring function really do work
to all you festool users your saw is very good but mine is better sorry :))))))))))))))
Yeah! If you cut Melamine sheets, it's always a tear out when you plunge cut all the way through because of the blade curves back to tear out the Melamine. With a scoring cut, you only slice the Melamine and prevent the tear out. This holds true on the table saw too. I always have to score the first cut and then do an actual cut so there is no tear out. My only problem is saving enough to by the Mafell, it's like buying a Lamborgini. LOL! $870 just the saw and $1,010 for saw/track. The Indicator is extra $73.70.
You know if they only make the track to be able to balance on a thin board, I don't think you'll need table saw anymore. You can plunge cut to rip small strips with out wasting materials.
imagine not having enough money to have mafell and festool and having to choose one. Sad!
Quick correction / point to note: At 2:33 he says "If you're using a track system, the saw pivots about the underside of the track. So no matter what angle is selected, this edge is always your cut line" and he then later says the movable pointer is there to show the cut line when you're working off the base plate instead. Not sure where they got this information from as it isn't mentioned in manual, and it doesn't work like this one mine (which was a bit of a disappointment). Cutting at 45 degrees still moves the cut line over by about 1.5mm to the right whether I'm working on the Mafell track or using it on Festool track. If someone know's differently please let me know in the comments. Had wondered if the saw moved slightly differently on the Mafell tracks once you've taken the insert out so it can work on other track, but I don't think that's the reason - I think they just got this point wrong
its a known defect of mt55cc. there was a guy in youtube solved that problem with shimming inside of the base.
I think I'm going to get this, only thing is wanted to know. If something happened to it and it broke would it get repaired here in UK or would it be sent back to Germany. And who pays for the courier to collect it and return it? Anyone know?
Wow love you video mate ...im in nz too ..greymouth lol ..do you know if there anyone else in nz that has a TH-cam channel that you can recommend please..ive just started woodworking since lockdown and loving it....cheers les
Hi Les, we are actually in the UK. Thanks for the comment, unfortunately I cant think of any NZ based TH-cam woodworking channels to recommend but glad your getting into it. If your ever in the UK and want to add to your carpentry collection get in touch! :) All the best NMA
At the end of this video the saw was moved back to its glass box next to the crown jewels
I have a Festool ts55 for sale now...
берите макиту 6000 и линейку не прогадаете