I'm surprised with some of the negative reviews. I was so impressed with the th-cam.com/users/postUgkxMwYg0MOXR4M-oGeyBsNSYe1aPOUoRH6D cage that I got the lat pulldown attachment that goes with it. It is equally outstanding. I don't have one complaint other than putting it together is a job. The instructions and packaging of the parts are very well designed and organized. Also, I stripped and damaged the pull down cable the first day, admitting it was my stupid fault, and they quickly replaced it at no charge. I'm 6'5, 280lbs and fit in the cage just fine. Glenn B
Definitely one of best racks built so far I seen since quarantine started.. definitely have to put some workout videos to see how it holds and work ... overall great job 💪🏽💪🏽💪🏽
I'm very happy with this video. Finally someone ballsy enough to make a proper joint. I would like to see one of those Japanese three way joints though. Or maybe some mortise and tenon joints that go through to the other side.
Make concrete weights! Go fully-fledged Fred Flintstone! Very nice build. I'm not really handy but I think I'll give it a go. I would probably insert the pull-up bar THROUGH the 4 X 4 and attach it on the outside. This will lessen the strain on the screws inside the wood because the load would be supported by the wood itself instead of the screws.
Damn! this is awesome! I just made my version of your "$50 dollar rack", and you came out with this "rack with roids"! This just make me wants to make my own version. Excellent job!
Nice work. So many DIY racks being posted these days. From DIY Guru's steel rack to DIY Creators to Buff Dudes to this. All different designs with different price points. Rack styles with different benefits. I'm a fan of the Buff Dudes design that also uses 4x4 and they recently loaded it to over 1000lbs to test max loading. It didn't even blink. The DIY Guru steel one requires welding skill but it is nice looking rack. I would need to still buy the bar and weights which could be pretty pricey.
Woww 😮👍👍 Nice work, a few hours to build this wood rak or a few days? If you Can post exactly all you needs to build this rak and all dimensions, i think i ll try to build one 😄🙈🌈 ☀️ very motivated thank you // cheers from Switzerland
I'ld love to see how it's in use and how stable it is. I think the ending part was pretty fast. Show me your proud work. :3 It looks awesome this far ...
Nice build. On the posts where you have the holes for adjustable pins, I'd recommend 1/8 steel cover plates on front and back of the post with drilled pin holes. They can be attached with (2) 1 1/2" countersunk screws at 12" spacing. This will give your rack many more years of heavy use.
Hey, awesome rack. The only thing I worry about is how much weight the pulleys can take before they pull out. I wonder because I have built one of these before and the hook I used to attach the pulleys was looking sketchy. Anyway, good job man.
saludos,muy bueno,Eddy,siempre pensé,si era posible estos equipos en madera,y ya veo q sí se puede!!! Buen trabajo,y espero surjan otras cosas sobre esto.
With this setup anything you feel like you're missing out on vs a commercial gym? Even after gyms open up here I'm questioning if worth going back with strict time limits, having to book a time slot etc in place.
If I’m squatting, what’s to stop me from accidentally hitting one of the pipes used to hold the bar and pushing it into the 4x4 rendering it useless and me stuck holding weight?
@@_Apeflex lol fair enough. Maybe add another small 1-2” section of pipe to it with the male to male connector piece being too big to fit into the hole? Just a suggestion.
@@_Apeflex True. You did manage to stick a wedge in a couple spots I see. I guess most people using this isn't Eddie Hall or Larry Wheels so as long as it's functional and safe
Troy Pollonais yeah, no, it was never intended to hold a ton of weight. I’m no monster lifter but I can get 5 plates for a single rep on squats. But this was just really to keep me somewhat active during the lockdown. Needless to say I sold it to somebody and they’re loving it lol
would help to stop from inhaling dust, from my experience of cutting alot of lumber during build i inhale a lot of dust and it dries out your throat n you feel like sht, but also its probably good just to shut everyone up lol
Yall don't defend the dumbass if it was for saw dust he would only have it on when he is cutting. And as far as avoiding hateful comments I'm pretty sure as a youtuber he has the balls to stand some haters this is just another fool scared to death because of what cnn has told him
Justin Knockaert I wore a mask in the video because I was cutting wood and didn’t want to inhale saw dust from the miter saw. It was easier to keep the mask on/pulled down than have to pull out of my pocket and replace it again.
4:52 I think it was a mistake that you made that incision on the vertical wood with holes and made that dado joint with the short horizontal wood. That incision should have been made on the other side where you put the the longer horizontal wood for the squat rest. As seen in 10:36, that joint ended up just with the 90 degree steel plate underneath. That joint needs to be strong and would have been a lot stronger with the dado joint.
I'm surprised with some of the negative reviews. I was so impressed with the th-cam.com/users/postUgkxMwYg0MOXR4M-oGeyBsNSYe1aPOUoRH6D cage that I got the lat pulldown attachment that goes with it. It is equally outstanding. I don't have one complaint other than putting it together is a job. The instructions and packaging of the parts are very well designed and organized. Also, I stripped and damaged the pull down cable the first day, admitting it was my stupid fault, and they quickly replaced it at no charge. I'm 6'5, 280lbs and fit in the cage just fine. Glenn B
With all these people making tutorials, your build definitely looks the best and most practical. Great work
Mad respect for lap and dado joints alone 💪 👏🏻 👏🏻 👏🏻
When you have time to provide the materials needed and where you obtained it would be greatly appreciative!! Nice work!
Your local hardware store. Has the wood the screws the metal things that go wherr the wood joins up. Lol
I work with steel myself, but it's great to see that you have such confidence in your wood.
Every man should have confidence in his wood.
Awesome build, would’ve loved if you did a voiceover instead of quick cuts with music. Just future reference but overall good content bro
lil boof pack I agree but I almost didn’t even get this on film as I was on a time crunch. This was the best I could do. Sorry man and thanks
Yes.
I had to turn the music off.
@@_Apeflex can you maybe upload schematics of it or the measurements and stuff like that?
Definitely one of best racks built so far I seen since quarantine started.. definitely have to put some workout videos to see how it holds and work ... overall great job 💪🏽💪🏽💪🏽
Jonathan Garcia I appreciate this brotha
Jonathan Garcia part 2 is up!
I'm very happy with this video. Finally someone ballsy enough to make a proper joint. I would like to see one of those Japanese three way joints though. Or maybe some mortise and tenon joints that go through to the other side.
Make concrete weights! Go fully-fledged Fred Flintstone! Very nice build. I'm not really handy but I think I'll give it a go. I would probably insert the pull-up bar THROUGH the 4 X 4 and attach it on the outside. This will lessen the strain on the screws inside the wood because the load would be supported by the wood itself instead of the screws.
Sweet build!
Now I just need an empty garage, a barbells, and some money.
Man the the best DIY squat rack video i seen so far... very well built... tnx for sharing your art!
Seems simple enough build mate. Very well done
Would you be able to offer some sort of blue print? Of all of the products you used and dimensions, etc?
I built a rack similar but a lot more heavy duty. Will do a voice over on mine then in the very near future.
@@LairdRoss please do it soon I need to build one very soon
@@okram7592 will do it tonight then mate :)
Laird Ross yoo could i also potentially get those blue prints?
emil bonomi did u get plans u can share. Please
genius work on the design
I've seen a lot of homemade Racks in this quarantine but this one is legit... Nice build and woodworking skills ...
Best looking homemade rack I seen thus far
VIOLENT BREED appreciate it man
Please post video 2 soon with your commentary on how it performs!! I want to try this build!!
You really just did that. Incredible skill
Damn! this is awesome! I just made my version of your "$50 dollar rack", and you came out with this "rack with roids"! This just make me wants to make my own version. Excellent job!
Saul Siordia haha it’s all good man. The $50 Dollar version is fine! I was just bored and needed something more durable
Nice work. So many DIY racks being posted these days. From DIY Guru's steel rack to DIY Creators to Buff Dudes to this. All different designs with different price points. Rack styles with different benefits. I'm a fan of the Buff Dudes design that also uses 4x4 and they recently loaded it to over 1000lbs to test max loading. It didn't even blink. The DIY Guru steel one requires welding skill but it is nice looking rack. I would need to still buy the bar and weights which could be pretty pricey.
Make concrete weights! Go fully-fledged Fred Flintstone!
SUPER impressive. I’d love to see the lat pull down machine in action.
I looked through the comments to see if it was already asked, but didn't see it... How much did you spend on this build? Awesome work brother.
Woww 😮👍👍 Nice work, a few hours to build this wood rak or a few days? If you Can post exactly all you needs to build this rak and all dimensions, i think i ll try to build one 😄🙈🌈 ☀️ very motivated thank you // cheers from Switzerland
Great job looking good
I think About 98% of the people watching this would agree that This video would b 100X better if u included the supplies/plan/blueprint u used. 🤷🏽♂️
@to_mm_ei_alves / @eddy what's the hole spacing for the pegs? Estimating every 4"?
this is an awesome project! This is maybe a rude question, but could i get the Blueprints of this project?
It’s a DIY project. Nothing rude about your question
That is a work of art mate. Well done
Love that gym fever, corona ain't holding no one down.....
Corona who? Lol the lazy find excuses. We find ways
Man brother if you live in Texas I'll pay you to make and i'll pick up. On the Real! Gr8 stuff.
D Augustine thanks brotha!
Ok I need the plans and cut list I got work to do ... great build
that is so cool, awesome build and design!
Respekt!!! Really good job. Aber ne of the best DIY Rack what I see here on TH-cam 💪
Cool project
I'ld love to see how it's in use and how stable it is. I think the ending part was pretty fast. Show me your proud work. :3 It looks awesome this far ...
How did you come up with the layout? Also, do you have any building plans you’re willing to share?
When I was 16 my dad made me my first bench/ station. He made it out of metal. Beautiful work man. Well done
Amazing! Good job it's very well done!
great design, great work thanks
Awesome video. It would be cool if you added a materials list somewhere but it looks like you did your homework building this rack.
Very impressive bro. Good work man.
Eddy was wondering if you can put your plans for your squat rack you build I want to build my self one please an thanks Danny
Thank you very much brother.for showing people how to build a powers Rack. 👍 humans karma law brother.
Looks great! 💪🏼👍🏽Can I get your squat rack measurements?
Very artist..
Compliment.. Beautiful video and super like by Warmachine bodybuilding of garage Gym italy
GREAT JOB!
Nice build. On the posts where you have the holes for adjustable pins, I'd recommend 1/8 steel cover plates on front and back of the post with drilled pin holes. They can be attached with (2) 1 1/2" countersunk screws at 12" spacing. This will give your rack many more years of heavy use.
"I DONT WANT TO INHALE THE SAW DUST SO I HAVE MY NOSE OUT OF MY MASK" -Eddie MisConcepcion 2020. Sure bud, whatever you say.
Thanks for keeping the traffic flow on my channel. Because of this comment my video will stay a live for a long time and I’ll keep earning money👌🏽
@@_Apeflex even a broken clock is right twice a day. making money is easy, maybe you should try not to look like a moron.
Experienced User I look good actually. But thank you for your comment😘
Hey, awesome rack. The only thing I worry about is how much weight the pulleys can take before they pull out. I wonder because I have built one of these before and the hook I used to attach the pulleys was looking sketchy. Anyway, good job man.
How come white people always use the word sketchy?
What are the metal poles for by the lat pull???
How would you enhance for a 7’0 person?
what are you using for your poles?
saludos,muy bueno,Eddy,siempre pensé,si era posible estos equipos en madera,y ya veo q sí se puede!!! Buen trabajo,y espero surjan otras cosas sobre esto.
Hey do you have the project of it? I want to build mine.
And congratulations for ur excellent job ☺️
Nice man nice job!!!!!
Can you share the details about the cuts, measurements and total cost
Parthav Shah I’ll try on another video
@@_Apeflex awesome because i'm very intrigued!
Bad ass bro nice work!
Eddy Concepcion did you ever do another video with measurements etc? I like your design but really need the details!
bro you have all wood measure plan ?
WHERE IS THE FULL VIEW STILL IMAGE?
How much should a 150 lb man bench?
What is the highest load is possible , on bar, and on pulley
many thanks in advanced
bro this is looking sick i can’t imagine making those cuts though. I’d probably screw something up
Agilitea thanks man. I would practice on a 2x2 before jumping in on the project. It’s really not hard but takes patience
what was the total cost
With this setup anything you feel like you're missing out on vs a commercial gym? Even after gyms open up here I'm questioning if worth going back with strict time limits, having to book a time slot etc in place.
Great work !! 👏🏻 do u have a building plan?
The project?
That music sounds like a stuck record!
If I’m squatting, what’s to stop me from accidentally hitting one of the pipes used to hold the bar and pushing it into the 4x4 rendering it useless and me stuck holding weight?
literally nothing and you're f'd... so don't f up and you'll be fine? i built this for me and all its flaws are taken into consideration.
@@_Apeflex lol fair enough. Maybe add another small 1-2” section of pipe to it with the male to male connector piece being too big to fit into the hole? Just a suggestion.
How’s it holding up? I didn’t see any lag bolts used.
I don't see why you would need lag bolts anywhere.
Have you ever built anything that has to hold or carry heavy weight?
@@elyh777 yep. Nothing nearly as elaborate as this. But I just built a half-rack. No lag bolts. Just nail plates. There's a video of it on my channel
Nice work cant work for part 2
ARCHIE BOY NOKYERA thanks bro. Coming soon
@@_Apeflex type error exactly thats what i mean tnx much ...stay strong stay healthy
Hi. Do you know where I can find some video that explain how to built a nice homemade storage (in wood) for hexagonal dumbells? Thanks
Did you design it yourself or did you get the plans from somewhere else? Either way can you provide them?
i designed it
Could you please provide the measures of this? If already available where are they?
Hey how much you spent on supplies???
the "extra" faster is not necessary with those joints. but nice.
Is a part 2 coming, with instructions on how to build it?
Plans please???
hello friend can you provide me the measurements of your rack
Any possible plans on this build so we can replicate?
What kind of wood is this? Pine?
Should add angled corner braces for extra strength.
Troy Pollonais there’s a lot that can be added to reinforce this. It worked for what I needed with zero issues so it’s all good
@@_Apeflex True. You did manage to stick a wedge in a couple spots I see. I guess most people using this isn't Eddie Hall or Larry Wheels so as long as it's functional and safe
Troy Pollonais yeah, no, it was never intended to hold a ton of weight. I’m no monster lifter but I can get 5 plates for a single rep on squats. But this was just really to keep me somewhat active during the lockdown. Needless to say I sold it to somebody and they’re loving it lol
Dope! 👏💯
did that 10" saw cut all the way thru..
would you tell me the measures you used?
Did you use 4x4’s ?
Can you please link the dimensions i really want to build this myself
Dimension plz
You should sell them. Ship em out.
like man, but I need dimension of all wood
How bout a material list ?
Solid rack
Guys in his own garage with a mask on.
would help to stop from inhaling dust, from my experience of cutting alot of lumber during build i inhale a lot of dust and it dries out your throat n you feel like sht, but also its probably good just to shut everyone up lol
Pretty sure its for saw dust not the rona -__-
lool dummy
Yall don't defend the dumbass if it was for saw dust he would only have it on when he is cutting. And as far as avoiding hateful comments I'm pretty sure as a youtuber he has the balls to stand some haters this is just another fool scared to death because of what cnn has told him
Justin Knockaert I wore a mask in the video because I was cutting wood and didn’t want to inhale saw dust from the miter saw. It was easier to keep the mask on/pulled down than have to pull out of my pocket and replace it again.
Nice video but bro voice over next time. This music makes this video hard to watch with the volume on.
what are the dimensions
4:52 I think it was a mistake that you made that incision on the vertical wood with holes and made that dado joint with the short horizontal wood. That incision should have been made on the other side where you put the the longer horizontal wood for the squat rest. As seen in 10:36, that joint ended up just with the 90 degree steel plate underneath. That joint needs to be strong and would have been a lot stronger with the dado joint.
And where are the measurements?
👏👏👏
This is really cool! But why are you wearing a mask inside your home?
But you already have nice lats
Can you make me a blueprint😅
🔥🔥🔥🔥👍👍👍👍
How are we supposed to build without instructions and measurements nice tutorial by the way but voice instructions was necessary