Great first build! I would recommend adding the additional screw into to help support/secure the gpu and flip the radiator fans around as intake so that you are bringing in cooler air from outside of the case instead of exhausting hot air from within the case into it. You'll still be able to see the rgb fans.
She actually has it the right way but she explained it in reverse. She has intake bottom, exhaust top, but she flipped it in her subtitles. Accidentally correct? 😅 but anyway you can see the orientation of the fan, despite what her subtitles said.
You said that your top fans is intake and bottom exhaust, while you set them up with the opposite. Which is the right way, we want the hot air rise easily and out on top as what you did. Just that current setup probably flip the radiator's fans so that you can get slightly positive pressure configuration, as of currently, you only have 3-120mm fans for intake at the bottom with 2-140mm, and 4-120mm exhaust. Just for better cleanup and prevents dust buildup with negative pressure configuration.
Loved the build, it came together so well and the aesthetic of the entire setup is lovely! One little thing I wanted to mention towards the video editing though, the white subtitles can be hard to read at times due to alot of the background being white too. I'd recommend using either a different font color or colored outlines/background to make them stand out a bit more!
Nice build. Just a few tip... when you put thermal paste on, consider putting it on the CPU and not the waterblock... that way you know you're covering only what you need and not putting on too much. It looks like there could be extra thermal paste on the sides of the block that could get onto your motherboard or leak down onto your graphics card later down the road. Secondly, the subtitles said you added exhaust fans at the bottom even though they are intake. You got the fans right, I think it was just a typo though. Regardless, congrats on the build.
Could have gotten a 13400 a decent B760 board and a decent air cooler and even with DDR5 costing more than DDR4 it overall would have cost about the same. Or a 12600 and a B660 board. $200 for a $150 CPU leaves me shaking my head. That said if she's happy with it I guess it's all good.
@@wavesxi1001 Zen 4 out of the box runs pretty hot so the 7600x is not apples to apples with something like the 12100f which with a good air cooler runs at least 10-15c cooler when doing something like gaming. It's also comparing a ~$100 CPU to a $250 CPU so...
Currently saving for my own pc and I am going for a white aesthetic too! Some parts are hard to get in white and I hope nothing goes wrong with my build.
Wow! Building your first PC is an achievement. Your mid-range, aesthetic setup is impressive. If you want to enhance it with stylish lighting, add Nanoleaf panels.
id recommend getting white cables with the cable separators or the separators themselves if you can find them (not sure if theyre sold individually), it would make your build look a lot cleaner than it already is! and i would try tucking in wires where you can. another tip i can give would be a monitor riser or mount to bring your monitor up so your speakers arent blocked, besides that this is a great build and setup, i think you did great for your first ever one. what games have you played so far? or if you already played pc games what game feels better with all the upgrades? (of course not bashing you for the cables you have and such since you mentioned your budget and i get that, just wanted to provide some tips.) goodluck with any future upgrades!
a LITTLE TIP if u need to rebuild if something is missing...always screw the big screws with your fingers then check if they are secure with the screw...its a lot more easier if u get tired of screwing everything
Great job! I would suggest you maybe try and use the shorter plug for the gpu 8+8pin cable. It usually has more power capability and is safer than using the extended cable for your gpu. I have a higher power gpu so I had to use 2 separate 8+8pin cables for it (using the shorter of the 2 "pigtailed" cables, it actually made a difference in performance.
Bro yall gotta understand she’s weighing more on the aesthetics than performance and there’s nothing wrong with that, its all personal preference. Pc looks really good, well done
What a gorgeous PC! Watching this is making me wish I went with a white gpu. I opted out since the black one was cheaper LMAO. Hope you enjoy your new setup!
nice build! Enjoy! I have good old 8700k and 3060ti white build in o11 air mini. Sadly, I can't fit 280mm on side so I opt for 240mm galahad 2 trinity. If you want, you can swap out to sl120 infinity fans to make your setup eyecandy. But overall, your build now looks dope. Doing great for a newbie
im 12 writing this , i keep on drraming of getting older and working hard to get one like this it one of my dream list for when i grow up,theres nothing more nice then a nice gaming setup imo! and it look very cute and i like how well the white blends with black soulmates.everytime i see a video of something i like it motivates me more to do more,one day i will stop dreaming and get it for real❤
This build is absolutely BEAUTIFUL! I love the style you went for, and honestly I might attempt replicating it at some point. All the decor really goes well together, and I think you've done an amazing job. Hope you're enjoying the computer!
Sick build, just a heads up it’s probably not good mixing 2 thermal pastes together, u should look into cleaning the old one with isopropyl alcohol then apply the new one. Anyways pc looks amazing
It does look a lot better than my 1st system (which I built in 1995). I made 2 PCs last year for my twin boys in the same case as yours. An RGB lovers dream 😊 Nice build, maybe consider fan direction and put reservoir inlet / outlet below pump. Enjoy gaming
Love this white build, mines a mix of white and black but I regret not doing all white. I also added the stimmer plus cables and absolutely love them (triple 8 pin & 24pin)
I was looking for tutorials since I am trying to build my first PC too, this ended up on my home page and it's very inspiring and aesthetically pleasing, thank you.
swap the top and bottom fans you should have the top as exhaust its like going against physics if you keep them like this, hot air goes up make the bottom ones intake
I saw a few comments talking about how hot air rises and the fan configuration. What you've got will work well and is absolutely okay and if its what you like the look of that's cool. The force of hot air rising is weak and the fans would overcome it easily imo. Fair point to keep in mind if you do get temperature problems though Nice build! Edit: the radiator and pump setup is entirely okay too
for my o11, i have the bottom fans as the intake, 2 infont as intake, 2 with the aio as intake, 3 on top exhaust, and the back one as exhaust too. tbf my temps are amazing, love this case. clean build!
Nice build, I like the white asthetic. But I would have exchanged the rog strix board with a prime one(To keep the white) and then spent the extra money on a 3060 ti gigabyte white edition, or a 3070 for extra performance.
Congrats on your first build and a nice one! Things to note on your next build. The silver thumb screws are retained so they don't need to be unscrewed all the way out so you don't lose them! Also, you either want positive or negative airflow not neutral. Your setup is perfectly fine!
That’s literally my biggest dream, I’m so proud it was yours too and you could get it. I’m trying to look for a cheaper but still very good pc because I don’t have that kind of money. Btw it looks beautiful
please don’t replicate this setup. white builds are nice, but not this, research your components. like, what’s the need for a 280mm aio for a 12400f?? an air cooler would look fine and a nice one would look better most likely. that money could’ve been invested more into the GPU to get something better than a 3060…
You could Switch around Intake and Exhaust Fans, you want to take in cold air from the bottom and exhaust at the top. Physics ;) doesnt break your pc if you dont though so no worries
i thought you were gonna be one of those “ uwu cute single headpats” people but this was just a nice honest pc build, and for a first timer you did so well! (a lot better than my build)
I build computers for a living, you might wanna do ur exhaust fans up top cause heat rises and you could do 3 fans up top or put ur radiator there and put more fans on the middle, mainly a good idea to make those bottom fans intake
Convection is such a weak force that any airflow destroys it tbh. So in a pc case, it doesn't really matter For dust build-up though, that is a whole other story
Nice build, i have an extra bracket under my GPU so it stablises when its heavy weight comes down off the edge. you have a smaller one and not room for one but its totaly custom if you want one or not just a tip for next time!
just wanna say about the exhaust and intake fans. it is better to set intake fan at bottom and exhaust fan at top cause cool air are denser and stay at bottom while warm go to the top as it is less dense
I would not build a computer right now because I'm angry at all graphics card manufacturers right now, but I am still addicted to build videos. I have the same AIO, and I also sometimes regret not getting the one with the LCD display, but to be honest, it would be at a funny angle from my desk. Haha! I also remove more expansion slot covers than I need to, usually exactly the ones you did. You used a screwdriver with those thumb screws? Oh, you have long nails. Never mind. It makes sense. 😁 That little figurine on your graphics card is really cute. I've thought of adding something like that to the inside of my case.
Was wondering where my sweatshirt went lol, I don't have a dream pc because every 6 months parts of it become obsolete. The time lapse is ok but I prefer builds with talking as they go, you did a great job and nothing like building it yourself.
This is a tired topic at this point, but the fan setup is actually correct and you've just mislabeled them in the subtitles. Judging by the shape of the fan blades and their rotation direction - bottom ones are intake and top + rad ones are exhaust. So everything is fine!
idk wtf anyone is talking about in the comments or what the parts are but its really satisfying watching someone get something you cant afford.
True
Facts
agreed
Fr
Parts are in description
imagine waking up in the middle of the night and sitting here playing games a whole vibe.
Real
I would be too tired
I'd rather play games than sleep
this is the dream
Omg yes bro
i know you stated that this isn’t a tutorial, but i got like my parts for a pc and followed what u did and worked perfectly. ty love
I hope while putting gpu to motherboard you laid pc case to table or smth
What was the total costt?
@@Nesiahslost for me it was around 2,223 but it depends on which parts u choose and which alternatives u like
@@semrakav usd or what?
@@mrhabibiFN yeah usd
there is just something thats so clean about an all white build , also a great mic upgrade would be the quad cast hyper x in white
1 single spill can ruin all of that
the razor siren mini sounds really good
@@vincenttang3590real I was gonna put the exact same thing 😂
@@sweatiesyt lmao
I dont understand why everyone likes that mic so mush it is not good it sounds like your underwater
It's always better to have the fans below for intake and the Top fans for outtake, since warm air is going up. Nice build tho.
It is a weak force, the fans will overcome it easily. While it is true it'd maybe help, the difference is probably negligible
@@GruelingFive8 True, especially with that case it doesnt really matter xD
@@RealK1LlaH you have a good point XD
u mean exhaust?
@@berlin_sauce7bro what
Great build! Just a heads-up, the top bracket of your GPU is missing the screw. Not a big deal since it looks like your GPU is secured as is.
damn i totally missed that thanks for pointing it out 😅
🤓🤓
@@9ymannbro liked his own comment 💀💀🥶
she dont want you lil bro 💀@@9ymann
@@9ymann she doesnt fuck with you lil bro
amazing build, well done! It looks really good. I would also suggest having the bottom fans as intake and top fans as exhaust as hot air rises.
If you want to go overboard with the RGB, get lian li strimer plus v2 cable extensions, will definitely enhance the aesthetic for your build.
Those are wild
What pin amounts are needed for this build
@@Evsonlyfan it depends on your gpu, the mother board strimer however should be 24pin
Great work. This gives me the confidence to try my own PC build soon!
Great first build! I would recommend adding the additional screw into to help support/secure the gpu and flip the radiator fans around as intake so that you are bringing in cooler air from outside of the case instead of exhausting hot air from within the case into it. You'll still be able to see the rgb fans.
She actually has it the right way but she explained it in reverse. She has intake bottom, exhaust top, but she flipped it in her subtitles. Accidentally correct? 😅 but anyway you can see the orientation of the fan, despite what her subtitles said.
Building pcs is hard..
@@peppep8738 I do t think it is. It seems like it is.
good luck accidentally breaking one of the components and having to pay more @@QueenCityLivin11
You said that your top fans is intake and bottom exhaust, while you set them up with the opposite. Which is the right way, we want the hot air rise easily and out on top as what you did. Just that current setup probably flip the radiator's fans so that you can get slightly positive pressure configuration, as of currently, you only have 3-120mm fans for intake at the bottom with 2-140mm, and 4-120mm exhaust. Just for better cleanup and prevents dust buildup with negative pressure configuration.
Ok I was wondering if others noticed that. I was confused for a second because she said she had more intake than exhaust which it’s not the case.
Building a PC nowadays aint that complicated as back in the days and I'm not complaining! Amazing Job!
Loved the build, it came together so well and the aesthetic of the entire setup is lovely!
One little thing I wanted to mention towards the video editing though, the white subtitles can be hard to read at times due to alot of the background being white too. I'd recommend using either a different font color or colored outlines/background to make them stand out a bit more!
Nice build. Just a few tip... when you put thermal paste on, consider putting it on the CPU and not the waterblock... that way you know you're covering only what you need and not putting on too much. It looks like there could be extra thermal paste on the sides of the block that could get onto your motherboard or leak down onto your graphics card later down the road. Secondly, the subtitles said you added exhaust fans at the bottom even though they are intake. You got the fans right, I think it was just a typo though. Regardless, congrats on the build.
Is it fine using the pre applied thermal paste like on the Kraken aio or should I get thermal paste
@@itsglocking it should work.. just check your temps
sweet thank you @@LawyerSlays
+ I think she has negative pressure (more exhaust than intake?) rather than positive
@@itsglocking Its perfectly fine using the pre applyed i myself use the pre applyed so its no biggie.
water cooling for the 12400f is crazy.and not just any watercooling she got nzxt kraken aio lmao
I think it’s like 280 usd, because of the lcd screen, and it’s a 280mm aio. Not to meantion, the rgb fans.
Could have gotten a 13400 a decent B760 board and a decent air cooler and even with DDR5 costing more than DDR4 it overall would have cost about the same. Or a 12600 and a B660 board. $200 for a $150 CPU leaves me shaking my head. That said if she's happy with it I guess it's all good.
@@nadtzI'm water cooling wit da 7600x
@@wavesxi1001 Zen 4 out of the box runs pretty hot so the 7600x is not apples to apples with something like the 12100f which with a good air cooler runs at least 10-15c cooler when doing something like gaming. It's also comparing a ~$100 CPU to a $250 CPU so...
@@nadtz no I'm not comparing I jus wanted to share mb💀
I’m gonna be Building mine just like yours in Feb 😌, watching this is making me even more excited :)
How did it go?
Currently saving for my own pc and I am going for a white aesthetic too! Some parts are hard to get in white and I hope nothing goes wrong with my build.
Good luck
im scared to build a pc
@@peppep8738get a prebuilt
@@peppep8738 that's how I was too but once you get through installing the CPU (the scariest part) everything else just flows
@@peppep8738 Some channels I recommend are BitWit, Linus Tech Tips, and JayzTwoCents.
Awesome setup, very clean and neat. Beautyful, well done!
Wow! Building your first PC is an achievement. Your mid-range, aesthetic setup is impressive. If you want to enhance it with stylish lighting, add Nanoleaf panels.
There's nothing like watching someone build a $2000 setup that I'll never have
id recommend getting white cables with the cable separators or the separators themselves if you can find them (not sure if theyre sold individually), it would make your build look a lot cleaner than it already is! and i would try tucking in wires where you can. another tip i can give would be a monitor riser or mount to bring your monitor up so your speakers arent blocked, besides that this is a great build and setup, i think you did great for your first ever one. what games have you played so far? or if you already played pc games what game feels better with all the upgrades? (of course not bashing you for the cables you have and such since you mentioned your budget and i get that, just wanted to provide some tips.) goodluck with any future upgrades!
a LITTLE TIP if u need to rebuild if something is missing...always screw the big screws with your fingers then check if they are secure with the screw...its a lot more easier if u get tired of screwing everything
Love how you make this whole desk blue themed❤ このデスク全体がブルーのテーマになっているのが大好きです❤
😅
😊
love to see it. the build looks amazing and the video was relaxing!
Great job! I would suggest you maybe try and use the shorter plug for the gpu 8+8pin cable. It usually has more power capability and is safer than using the extended cable for your gpu.
I have a higher power gpu so I had to use 2 separate 8+8pin cables for it (using the shorter of the 2 "pigtailed" cables, it actually made a difference in performance.
felt the acrylics part😭 i think this is the most beautiful pc i've ever seen, i've dreamed of a pc so bad and hope to get one in a few years❤
Did you get it??❤
We almost have the same everything. Built mine today :) and then found this vid afterwards
Its sooo cool, but... THE NAILS AAAAA 💗💗💗
Bro yall gotta understand she’s weighing more on the aesthetics than performance and there’s nothing wrong with that, its all personal preference. Pc looks really good, well done
Even though you didn't fully research the best, it still turned out amazing.
Watching this late at night with headphones, 7:28 scared the absolute #$%^ out of me!
What a gorgeous PC! Watching this is making me wish I went with a white gpu. I opted out since the black one was cheaper LMAO. Hope you enjoy your new setup!
I feel your pain. I made an all white build and went with the Sapphire Nitro+ RX 7900 XT.. turns out it wasn’t as white as it was in the pictures.
spray paint it :)
Love this for you, i cant wait until im older and get my place and do these things
tbh ur soo lucky to have this and i lov the colours combo
Love the all white build! If you want to add more RGB onto your pc. I would recommend to buy a USB hub thats $20.
Oh my gosh the ending is amazing and the background you have is really cool!
great build! The aesthetics are so nice! i recently build in the Y60. I love it!
Your set looks awesome. Absolutely awesome
That's probably the most *BEAUTIFUL* and the most *AESTHETIC* pc i have ever SEEN IN MY LIFE!! ✨
nice build! Enjoy! I have good old 8700k and 3060ti white build in o11 air mini. Sadly, I can't fit 280mm on side so I opt for 240mm galahad 2 trinity. If you want, you can swap out to sl120 infinity fans to make your setup eyecandy. But overall, your build now looks dope. Doing great for a newbie
im 12 writing this , i keep on drraming of getting older and working hard to get one like this it one of my dream list for when i grow up,theres nothing more nice then a nice gaming setup imo! and it look very cute and i like how well the white blends with black soulmates.everytime i see a video of something i like it motivates me more to do more,one day i will stop dreaming and get it for real❤
If you ever thought to upgrade your components later, please try Lian - Li O11 dynamic Evo or xl with Lian Li sl12ov2 fans, it will look fabulous. ❤
Just got a new desk, monitor, keyboard, and mouse! This I my vision/ dream setup I’m going to try and create!!! LOVE THE FINISH LOOK SM😻😻
Why did I think the title said “making my first game”😭
The pc looks super neat you did a great job !🌷
HAHAH thank u ! still got lots to learn
This build is absolutely BEAUTIFUL! I love the style you went for, and honestly I might attempt replicating it at some point. All the decor really goes well together, and I think you've done an amazing job. Hope you're enjoying the computer!
Sick build, just a heads up it’s probably not good mixing 2 thermal pastes together, u should look into cleaning the old one with isopropyl alcohol then apply the new one. Anyways pc looks amazing
I think buying the not GIF version of krakens AIO is such a good choice for me. I have too many characters. Which would i even choose to put?
It does look a lot better than my 1st system (which I built in 1995). I made 2 PCs last year for my twin boys in the same case as yours. An RGB lovers dream 😊 Nice build, maybe consider fan direction and put reservoir inlet / outlet below pump. Enjoy gaming
btw make sure exhaust is on the top and intake on the bottom because heat rises up
Wow you did a great job! I haven’t built PCs in over 20 years and am thinking of building one soon. Your video is great! 👍🏾
How much different would you say the process is compared to today?
@@kingsleyabiamiriI think it’s more or less the same. However Windows XP back then was more stubborn than what we have today. :)
unless those are reverse blade fans that "intake" on the top is an exhaust. and your exhaust on the bottom is actually an intake.
Love this white build, mines a mix of white and black but I regret not doing all white. I also added the stimmer plus cables and absolutely love them (triple 8 pin & 24pin)
I was looking for tutorials since I am trying to build my first PC too, this ended up on my home page and it's very inspiring and aesthetically pleasing, thank you.
I can’t wait to build my PC similar to this! Awesome build btw ❤
did u do it
@@n01wthebullit yes i did!
@@shiblnautz yayyyy awesome :D
@@shiblnautz did you change anything ??im looking to buying the stuff
@@ughughugh-h2l different motherboard, cpu, aio cooler, and power supply
swap the top and bottom fans you should have the top as exhaust its like going against physics if you keep them like this, hot air goes up make the bottom ones intake
I saw a few comments talking about how hot air rises and the fan configuration. What you've got will work well and is absolutely okay and if its what you like the look of that's cool. The force of hot air rising is weak and the fans would overcome it easily imo. Fair point to keep in mind if you do get temperature problems though
Nice build!
Edit: the radiator and pump setup is entirely okay too
for my o11, i have the bottom fans as the intake, 2 infont as intake, 2 with the aio as intake, 3 on top exhaust, and the back one as exhaust too. tbf my temps are amazing, love this case. clean build!
yeah this is how it should be done, i have this exact build but fans are switched
That is one super clean build! Was it very difficult to find all the parts in white?
intake cold air from bottom. and hotter air leaves from top its just the natural flow of heat. use it to have a better flow.
Nice build, I like the white asthetic. But I would have exchanged the rog strix board with a prime one(To keep the white) and then spent the extra money on a 3060 ti gigabyte white edition, or a 3070 for extra performance.
Also, for the cable beneath the gpu. I would tie so it won't hit the GPU fan. I did destroy a 2080 like that.
Yup... Overkill for 12400f
@@davidnurhidayat5068 Not overkill in terms of bottleneck. According to calculations this combo will not bottleneck
we're taling about the board bru@@Bob-bw5zx
Badass vid 🫡 your pc looks so freaking amazing ❤
Congrats on your first build and a nice one! Things to note on your next build. The silver thumb screws are retained so they don't need to be unscrewed all the way out so you don't lose them! Also, you either want positive or negative airflow not neutral. Your setup is perfectly fine!
That’s literally my biggest dream, I’m so proud it was yours too and you could get it.
I’m trying to look for a cheaper but still very good pc because I don’t have that kind of money.
Btw it looks beautiful
i want one so bad bruh😔.
please don’t replicate this setup. white builds are nice, but not this, research your components.
like, what’s the need for a 280mm aio for a 12400f?? an air cooler would look fine and a nice one would look better most likely. that money could’ve been invested more into the GPU to get something better than a 3060…
I would recommend you get the Yeston 3060 . Check it out I think you would like it for the aesthetic you are going for.
HOW MUCH ARE ALL THE PC PARTS IN TOTAL????
$1.8k aud
sheeesh looks so cool with the all white
INTAKE ONTOP AND EXAUST ON BOTTOM!?!?? IT NEEDS TO BE THE OPPOSITE BECAUSE HOT AIR RISES
Thank you for your helpful response
You could Switch around Intake and Exhaust Fans, you want to take in cold air from the bottom and exhaust at the top. Physics ;) doesnt break your pc if you dont though so no worries
0:05 The GPU is sagging btw so be careful lmao
Looks so good! It reminds me of lab machines from scifi movies.
Not me being 15 and knowing how to build this bc i learned it in school ❤
School of dreams
I’m watching this right now while building my pc. Putting the Rams was probably the hardest part😭😭😭 I never felt this stress before😔
putting in the ram is genuinely probably the easiest fucking part of building a pc, are u mentally ok?
i thought you were gonna be one of those “ uwu cute single headpats” people but this was just a nice honest pc build, and for a first timer you did so well! (a lot better than my build)
What made you think that?☠️
@@T.H207 the sleeves over the hands, the white pc, it all kinda went together and made me think that
I love this so much! I’d also love let’s plays or vlogs where you show us you playing games eventually ❤️
to play roblox💀😂
And listening pinterest.
To be broke😂 oh ye that's you get your money up and not ur funny up gng
I build computers for a living, you might wanna do ur exhaust fans up top cause heat rises and you could do 3 fans up top or put ur radiator there and put more fans on the middle, mainly a good idea to make those bottom fans intake
Convection is such a weak force that any airflow destroys it tbh. So in a pc case, it doesn't really matter
For dust build-up though, that is a whole other story
@@Elvyne technically no cause the heat will collect either way even if its getting blasted out
She literally spent 70% on the aesthetic and 30% on the performance
dont think she cares
literally zero
Nice build, i have an extra bracket under my GPU so it stablises when its heavy weight comes down off the edge. you have a smaller one and not room for one but its totaly custom if you want one or not just a tip for next time!
all that just to play dish wash simulator
?
outta pocket
acting like girls aren’t allowed to play video games. your jealous bro delete this
umm
she has genshn installed
Unrelated but, I must say, I LOVEEE your nails. They’re soo prettyy!! ✨✨✨
Intake fans should be at the bottom and exhaust at the top. Heat rises so doesn’t really make sense to have exhaust at the bottom.
fire build I'd look into some psu cable extensions. They changed the way I look @ my card and mobo, most PSU cables are cheap non braided wiring.
This is a little late but intake fans should be at the bottom and exhaust at the top since hot air rises
The final look was awesome ...... Really appreciate your work .....
I just used that mobo and I totally didn't remove the plastic from the heat sync! Thank you for putting that into this! I need to remove that asap lol
just wanna say about the exhaust and intake fans. it is better to set intake fan at bottom and exhaust fan at top cause cool air are denser and stay at bottom while warm go to the top as it is less dense
Thats a a sick pc and respect for u for doing all that with long nails flawlessly
I would not build a computer right now because I'm angry at all graphics card manufacturers right now, but I am still addicted to build videos.
I have the same AIO, and I also sometimes regret not getting the one with the LCD display, but to be honest, it would be at a funny angle from my desk.
Haha! I also remove more expansion slot covers than I need to, usually exactly the ones you did.
You used a screwdriver with those thumb screws? Oh, you have long nails. Never mind. It makes sense. 😁
That little figurine on your graphics card is really cute. I've thought of adding something like that to the inside of my case.
Was wondering where my sweatshirt went lol, I don't have a dream pc because every 6 months parts of it become obsolete. The time lapse is ok but I prefer builds with talking as they go, you did a great job and nothing like building it yourself.
So satisfying to watch. I don't like gaming but the video is soooo good 💗💗
So cute! love the build!
its probably 2 months old by now
@@disissparta447 thats still new in my book :D
Water cooling for 12400f is actually mind bogglingly craaaaaazy
Quick tip, down unscrew the case screws on the outside of the case. They are meant to stay in. I have this case
Very beautiful PC in incredible full white
Oh, man! That motherboard is so gorgeous!
This was 1 cool white pc setup. Simple and satisfying video edit as well 👍
Nice build, but you got an sfx psu, you can easily get some white cake extensions to make your build really pop.
Great work! Soon I’ll have my first build underway, and hopefully it will be the only one for a long time 🤞🏻
This is a tired topic at this point, but the fan setup is actually correct and you've just mislabeled them in the subtitles. Judging by the shape of the fan blades and their rotation direction - bottom ones are intake and top + rad ones are exhaust. So everything is fine!