Spring Loaded Wolverine Claws! So Much Fun!
ฝัง
- เผยแพร่เมื่อ 26 ก.พ. 2024
- 2 Amazing 3D Printable Wolverine Claw Projects in 1 video!
Thanks to Elegoo for Sponsoring today's video!
Elegoo Jupiter SE -bit.ly/JupiterSE
Neptune 4 Plus - bit.ly/Neptune4Plus
Neptune 4 Max - bit.ly/Neptune4Max
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3Ultra
Saturn 3 12K $399 ➜ bit.ly/ElegooSaturn3
Files from todays video
Wolverine Claws by Shawn Mek
makerworld.com/en/models/1849...
Wolverine Arm Display by Nikko Industries
www.nikkoindustries.com/produ...
At Home Vase I used
www.athome.com/long-clear-gla...
MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
TH-cam ➜ / unclejessy
________________________________________________
Thanks for watching!
#Wolverine #Deadpool #3DPrinting - วิทยาศาสตร์และเทคโนโลยี
Haha, Awesome to see someone else put it together! I went through so many iterations trying to get something to work, I'm amazed anyone can put it together at all.
Couple things I noticed when hearing you:
1) In the design iterations I had to add those bumps to the middle claw so the trigger/brake would work. I, like you, enjoyed torquing up the claw spring so it pops out harder, but even at normal torque the claws were slipping through the brake mechanism at first. That's why I printed the claws upright initially, to get the layer line friction. But this was before adding ridges on the middle claw and brake mechanism. I just never went back to printing non-vertical, but definitely should change that.
2) I tried to explain this in the horrible instructions I put on the site, but I actually kind of torque the brake springs, buy loading the mechanism on the inside of the claw holding pillar and then pulling it over to the front. More importantly than the torque, this gives the mechanism some clearance from the box so that pulling down on the trigger more effectively releases the claws. Hopefully that makes some sense. That whole mechanism, I have been experimenting with for updates.
3) This was definitely made initially for my son, even using a 3d photogrammetry scan of his hand to fit it to his hand. But Bigger claws and hand strap are definitely a great idea and, scaling everything would probably work.
So fun to see, great feedback and insights too. Thank you so much!
You did an awesome job on these files! They are so dang fun to play with
Sir your design is simply brilliant. 10/10!
Flip the vase over and fill it with the transparent ooze they had Wolverine in when that added the Adamantium to his skeleton… the leds shining up underneath that will diffuse and make a nice mood light for Home theater. 😆 good luck, I know you want to try it now 😉.
I like the idea, but wouldn't it be super heavy?? Maybe just "tint" the glass to look like it's in a liquid.. 🤔🤔🤷♂️🤷♂️
G'day uncle jess ol son.....im happy to say i won a Elegoo Neptune 4 Pro over xmas on a story telling comp on Elegoos FB page, its my first modern printer since my ol modded Ender 3 v2. Ive had to start learning klipper, and making new settings for this and all my filaments. But im happy i entered the comp (im usually wasting my time or i dont have the qualifications) and has allowed me to build my PA Enclosure and Omni projects quicker. Cheers for being a great uncle to this 50yr old bloke and showing me Elegoos high standards from A M8 here Downunder🙃
SHHK
Looks awesome! Those springs work great; I'm really impressed!
50 years of Wolverine this year
Really like this. Would love to see more innovative 3d print showcases.
Very cool. I’ll need to print some claws for myself!
That is a sick print. Can't wait to see the final painting of the claw and bones.
the skeleton arm... 😍
That arm is very cool. Looking forward to seeing this complete with some LEDs in the case.
Cool
So cool! I'm glad you liked the scraper 🙂
Scraper worked awesome
Yeah, looked perfect!@@UncleJessy
on the top you should add LEDs.
I’m currently working in the arm myself. All printed on my P1S’s. Just finished wet sanding yesterday, starting the base coats this week. Gonna form my own tube out of a sheet of plexi.
Print with ASA or PC, and they'll be deadly.
Cool project
This popped up in my feed last night and I've been debating on printing it lol
An idea for the lighting would be to buy a circular light that sits at the bottom and lights up the entire circle evenly which would also act as a riser or buy two, one at the top. Those cheap USB lights come in every shape and size. I bought two a few months ago for a weird plastic clear tube I got that I thought might make an attractive light to always have on the toilet as an ambient light at night. You can get just as cheap motion sensing ones too so it lights up only when you approach it which makes a battery or rather rechargable light a good long term solution without having a cable coming off it. Super ideal for those central places like a coffee table where a cable is just not possible.
I'd love to see this all chromed up and finished!
yessss! Those are awesome!
RGB FTW Uncle from another country!!! can we expect it in the next video? hahaha
That turned out great! Nice work!
Thanks a bunch!
I like the idea of "lifting the arm" as well! I would use clear glass or acrylic tubes to prop the arm up and make it look like its floating. Then I would paint the top and bottom pieces to look like a lightly blue tinted metal with red LEDs in the top. I rhink LEDs in the bottom might make the clear peices holding the bones up be more noticable. Just a thought..
You should try giving it a chrome finish and illuminating it with white light!
I found your channel about a week ago. So far every video has been extremely helpful
Damn, have to get a resin printer soon.
Wassup brotha! Tks for the tips on the Diggro repairs. Love the content! Keep killing it!
I think you should do all the above! LED lights, raised arm, etc.
Did you finish the giant Magneto statue?
I just discovered your channel and it’s Electric!!!!
Lights up and down!
I would illuminate it from the top and bottom. For the bottom you can put led strips in the groove the cylinder slides into, I think that would give it a cool effect.
Ohhh i like the idea of the LEDs going into those slots
Do one light as yellow and the other as blue to illuminate the tube and give his uniform colors theme to it. Great video
You should put the light in the top portion, i think itll look cooler if the light shines down plus you get the added bonus of hiding the wires neatly. Also for the base if you can make it rotate slowly i think would make it EVEN cooler!
I think you should try to do a water filled vase with LEDs and a bubble pump. It would look so sick and unique, no one would have anything like that.
might want to add silicone grease
Sickkk
I love ur content keep it up
Try a floating effect... Have everything float with a light at the bottom beaming up
Very impressive. Never knew you could 3d print springs. How would one go about 3d printing a ratchet joint without using any metal springs?
The claws look very cool, as does that arm display piece.
Any configuration/settings for the "rapid" PETG that we should know about? (flow rate, temp, etc.) Thanks!
It would take a lot but, pouring epoxy resin and put some led in top and bottom would be awesome
Put water, bubbles & lights in like Wolverine getting his adamantium from lab.
If you could make it retract, these would be great.
Now I want get a glass vase and put a terminator arm in it thanks for video
Use transparent PETG for the base, maybe slice it in two parts so just the inner part is transparent however.
Great videos. I have purchased several of your figures. Could you do a video on how to separate one of your figures to be able to print bigger. I have a Neptune 4 plus and would like to print a T-Rex larger than my print bed. Or, if you could provide files with parts separated. Thanks
Lights from the bottom makes more sense if it were to mimic a real specimen display?
That is so funny you made a video about these. I saw them about a week ago on maker world and printed them. I think they are very cool but mine didn't actually work that well
Very cool, I need an FDM printer, urgently...❤
yes
Claws need to be bigger, but cool!
Do they have one that’s like those swords/lightsaber that fold in and out with a flick?
I'm sorry if I'm asking this under this video, but how much does a resin printer lcd screen last? I wanted to buy mono 6xs but I'm afraid that the screen it's not going to last and the replacement is a little bit expensive
The other day transformers, today wolverine🔥🔥🔥🔥🔥 content
Lava lamp
How about leds in both top and bottom?
is there an update on your magneto statue?
Me being so nerdy that I can tell the first set of claws were modeled after how they appear in The Wolverine because that’s the only movie where the top of the claws have a flat surface
hey uncle, is PETG the best filament to use for cosplay?
That will definitely hold up the best, is easier to sand and is more heat resistant. That said, I still mostly print with PLA
you can pour in glycerin, that would make light refract better
can you make a deadpool Mask out of tpu and then it could have that cool part that he tucks into his suit to make it tighter
claws probably need to be a few inches longer
You should put water in it
Just started watching, so maybe you touch on this later, but I have had bad luck with HF PETG. It's very fragile. More than HF PLA PLUS.
What about the T-800 arm from Terminator2 movie in that display tube.
🔥 I don’t have a 3D printer. Where can I buy a completed sent ?!!!
use a rotating base!!!!
The X openings project X ...X MEN opening I see
T-800 clay
haha exactly
first nice
Now, if only they were about a foot long
Id put some liquid in it and add a light to the bottom to make everything pop.
that is pretty cool but all i could not stop looking at is that gray in your eye lash . shave that off lol
his claws go shink not snikt
Uncle Jessy are you G.I. Joe fan?
I wish I had a 3D printer! I'd love to do an X-23 varient ( ◜‿◝ )♡
Do a sexy bodysuit cosplay to go along with it 🫢
Who has white eyelashes?
My post was deleted, wonder why 🤫. Neptune 4's have issues. Do your research before committing.
All printers have issues. Anyone who believes any one model or brand is always flawless is fooling themselves
True but even then, printers upwards of $1k also have issues.
Had my N4+ for 5 days before I packed it up and am sending it back. Didn't pay retail amount for alpha quality hardware. Too bad... I love their resin printers..
huh? I don't delete comments unless people are being racist etc youtube does auto hide comments that it flags for manual review
My post was vanilla as can be other than saying the printer has issues. No cussing or links etc. Just wanted to make the community aware.
if these elagoo printers are supposed to be the dogs b???cks in printers why are you using glue sticks to get the prints to stick to the magnetic build plate that you keep raving about
man the video is constantly out of focus, hard to see whats going on
Yeah and Disney can't help but attack the childhood nostalgia of the people who made them billions and billions and now, Now your voter target demographic isnt enough to stop the backlash of bad creative choices.
This channel deletes comments or questions that question Elegoo. I asked last month why Neptune 4 is not compatible with orca Slicer to read the G-code, it is not capable of reading it, since it does not show info or thumbnail on the touch screen when you insert the pendrive. My comment was deleted and I never received a response.
Привет из Украины 😊 Вау крутая печать такой вещи😊