HID OR LED BETTER IN PROJECTORS ON RAM TRUCKS
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2021
- HID OR LED BETTER IN PROJECTORS ON RAM TRUCKS or should you stick with the halogen bulbs in these projectors we test out an hid kit 55w compared to LED 9005 bulbs to see what is brighter or the better bulb for this application
Click HERE for the innovited 55w HID kit
amzn.to/3Zy1tkm
Click HERE for canbus adapters / capacitors
amzn.to/3zNfSfw
Click HERE for the LED bulb video
• IS IT WORTH PUTTING LE...
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Bulbs #Trucks #Cars - ยานยนต์และพาหนะ
Click HERE for the innovited 55w HID kit
amzn.to/3Zy1tkm
Click HERE for canbus adapters / capacitors
amzn.to/3zNfSfw
Click HERE for the LED bulb video
th-cam.com/video/qI3fi125PNQ/w-d-xo.html
Those links find nothing. Page not found. Bummer. Maybe NAME the brand or kit specifically? I dunno.
links are not working. How did you connect a computer to the car and change the light settings?
@@danm316 with a cable
This is what i was looking. Led can't compete with HID in projector housing.
Nice one bro
i got the s-v.4 and they work better than i expected, clocked them at 3 and 9, they do have a vertical dead spot, but i didnt notice it when adjusting the height. also i wanted more of a plug and play vs having a ballast. also i can see so much better going down the road at night. good video showing both and comparing them side by side
I use HID headlights in my '14 300C, they seem to work OK. LED lights are very bright but the "dead" spot that many of them have can be a bit difficult to work around.
Great video! Thanks man!
I've got aftermarket projectors and have used hid bulbs for a couple of years. One of the ballasts started acting up, so I bought a H11 LED "upgrade" that was considerably more expensive than a replacement HID kit. Right away, there were the same problems you highlighted- no matter how the bulbs were indexed, there were multiple 'hot spots' and 'dead spots' in the beam pattern and the light output was nowhere near what the old HID bulbs had. So, the LEDs were returned and new HIDs are where they belong. On my other car with H4 bulbs, the LEDs work great and HIDs are horrible, so you just have to try both and see what works best for your situation.
Dam that’s a very good example on the street there, really like the HID in that housing, guess I’ll have to go that route. Was really hoping for a simple and small LED install but there’s really no comparison here, beam pattern is paramount. Thanks man!
I have always preferred the HIDs over LEDs as it never fails no matter how I clock LEDs I have the dead spot making it harder to see which is the complete opposite of what we are trying to accomplish by upgrading halogen bulbs.. great comparison video!
Hey John, thanks for all u do, really enjoy this channel. I'm a 2018 ram 1500 owner as well and I clicked on the link for the low beams and this references me to the same brand but not the right application for my ram. Maybe its me but help! Thanks from Texas
I have auxito leds in my Ram 3500 with projectors and I don’t have any dead spots.
Yes do the high beam video. Also video of converting a ram with the standard bulbs into ones with the nicer projector ones like you have in your truck
www.ebay.com/itm/For-09-18-Ram-1500-2500-3500-Full-Glossy-Black-Smoke-DRL-Projector-Headlights-/373014537544?_trksid=p2349624.m46890.l49286
Plug and play. These h7 for lows and h1 for highs. Running hid for low beam and led for highs.
Have these HID's lasted I'm looking into getting some but not sure which ones to get. Thanks in advanced and for the informational videos!
Make a high beam video I been wanting to upgrade mine and been wondering if I should run led or hid love the channel
Thanks! I’m gonna order the hid kit an adapters from your links. I also want the led fogs from your other video. Does the colors match ok?
They are now making projectors that are specific for LEDs if you wanted to do a custom swap on the projectors. The retrofit source sells some pretty good products. I think it'd be pretty cool to see a custom headlight mod video from you because you're fairly skilled with a lot of these tasks and by the looks of that headlight housing it'd be really easy plus we could get to see a comparison for the new led projectors vs the old HID projectors, you could even add some nice custom halos, etched lenses and such. Much harder but well worth the work would be a dual Bixenon projector integration into the dakota headlight housings you have as the ebay projector headlights for the dakota are subpar at best I think custom ones would give you better light output than most vehicles but again this would be a lot of work, planning and wiring though it might work better with the new hellcat swap as the charger and challenger had projectors.
It's useless explaining this to people lol.
Thanks
2016 projector ram here, i installed 35watt (each) leds in mine and have zero dead spots clocked at 3-9. Also. A company called brightsource makes deeper caps for the rams to accept larger bulbs, already have grommets installed also.
True hids are better in a projector nice video thx 🙏
By the way big fan
I known this is a older video, WOW what a difference...
I have a ram 2500 with the factory projectors and I’ve been trying to find a good replacement bulb
Sold! Going HIDs for my projectors. My high beams are reflectors and might use LEDs for those. Did you end up trying them on your high beams?
Would the hid kit improve my 98 Dakota. The stock bulbs are not as bright as I would like
I installed the same lights and went through AlfaOBD as well and now I have my driver seat motor acting up with the associated circuit breaker getting extremely hot. Have you or anyone had similar issues when changing the body control module? Dealer said there may be a chance the change affected the seats/circuit breaker.
So the kit you listed says the 9005 is for high beam? Did you put this in your low beams?
Hey i get intermittent lighting in my 2015 ecodiesel projector headlights that i
Upgraded to led bulbs.
Would switching it to HiDS fix that issue? Does your headlights turn off and on at certain times? Thank you
imo the good ol HID xenon is still better, but LED is catching up. I just found HID is brighter, throws light much further away onto the road and its wider too. Yes LED still bright in fact if you look at them HID and LED side by side they looks almost identical, you just need to remember you need to also look at the road and check the light output to make a better observation. I do most of night time driving on the country side recently due to work and I found HID works way better, it really lights up the road so much better. with LED is tricky sometimes it works with projector sometimes it doesnt, and sometimes they work better with reflector headlights and so on. with HID they are meant to be inside projector housing also they are omni directional , while LED is bi directional that's why you can have dead spot with LED.
I ordered the same HID in the video/link in description and they burnt out in less than 6 months do you have any other recommendations?
Can they work in non projector headlight? I have a 2015 ram 1500
How did you connect the headlight bulb to the housing. The connection for the build seems very different then the OEM headlight. Thanks
About the canbus, I installed LED highs and lows that came with the canbus. My auto headlight function isn't working. I thought maybe I changed a setting in Alfa that maybe messed that up. How can I get that function back?
Is it flickering a bit at the end?
How can you run higher wattage lights? The new auxbeam gx 240 watt 9012, any info would be appreciated
What hid bulb sizes did you get?
Buy a lux/lumen meter and show some real measurements of light output. Light temperature doesn't correlate to light output.
LED are the best in my opinion I had HID On 2018 Charger and I couldn’t see anything at night with a 5% tint on the front windshield soon as I put the LED I can see everything at night
@@denislaouenan5553 you just haven't bought the right led kit buy a kit with 360 leds from Amazon audew kit plus u don't need any antiflicker crap or wiring harness there true plug and play with no errors period
@@denislaouenan5553 and I bet you have a harness or antiflickers installed also for the hid crap 👎
I use Osram LEDriving HL LEDs in my Toyota Prius 3.gen projectors and I dont have any scary dead spots, light is nicely distributed on road, I think you choose bad type of LEDs, Osram LED bulbs have completely different body of bulb
Do the HIDs require the resistors?
HID’s are superior. I have GTR 5000k bulbs and Hylux 35w ballasts in my Ram. Love them like crazy
I would like to purchase the HID kit for my 2010 Yukon denali XL will it work I will soon be purchasing aftermarket projected headlights housing Hopefully I can just plug and play plz help 🙏🏾
Changed my 09 ram headlights to some Axiom halogen lights with LED running lights and now the high beams wont work...Thoughts?
HID's and projectors go together like peanut butter and jelly sandwich 🥪
Nice with HID'S, do you think it has something to do with the model year of your truck? I installed Sealight LED's on my 2020 5th Gen 2500, no dead space. Previous lights were halogen bulbs from factory.
Depends if your truck has projectors or are reflector housings. If it’s projector take a piece of paper and put it in front and I bet you’ll see dead spots
I have been looking into the leds, because my hid burned out after a couple years I had them on my 3rd gen, found it was going to get expensive replacing them that often
@Rob Roy I never thought to try the bulb on the other ballast, just thought it was the bulb
Some LED bulbs just don't perform well in some projectors. When you find a set of bulbs that do, the performance is pretty damn great.
Really superb video ,it really helped me to make a decision , and really appreciate you making his very informative video ,and HID is winner with no doubts for Projector Lamps,Thumbs Up from India!!!!
Can these work on 2019 Ram 1500 Classic ? Amazon is telling me no....
Hid bar facing down or up?
Halogen to HID it is... LED for high any good good?
I know holengen housing led bulbs are clocked at left to right
Love my stock HID's on my challenger but they are expensive to replace. I. Having intermittent issues with one side but im not sure if its a bulb or a ballast and both run in the $200 range
More than likely it's the ballast. The bulb will either work or not work. A ballast will/can intermittently go out and come back on.
@@hunterdan2002 ok thankis for the info. it doesnt happen often so i guess i just gotta wait until it shits the bed or happens more fequently
I guess the fair comparison would be HIDs in HID projectors vs LEDs in LED projectors. HIDs or LEDs in a halogen projector would not give you the best results, I imagine. I've also heard that 55w runs too hot that it actually melts the reflectors on their projectors; have you experienced anything like that?
Yup! You got it! Halogen projectors are made to accept normal LEDS. Meanwhile, HID projectors need a specific style of LED. Same with reflector bowls need a specific style of LED.
all boils down to what you already got and what amount of trouble you're willing to go to. for me, i'd just go with the plug & play led. those dead spots aren't major. but since he's already got the old hid kit, he may as well go with it. beyond that, i don't think this is one of those channels that run the full gamut of all configurations to find the best of the best
@@804MRMAN huh? He has halogen projectors. His original lights were halogen. 1
@@clarkcant I'm not sure what you're reading. But maybe you should read it again lol
So I bought the same brand of HID but does anyone know why these won't stay on? They turn on for maybe 1 minute than shut off?
Compre e instale este kit hid y no prende ninguna luz solo destello una vez y fue todo y pongo la luz original y si prende pero pongo el kit y no prende a que se deberá ayuda por favor
Dont forget the HID fluid
How to change signal light bulb sir?
Hi John love your video just wondering did you install a hid harness or did you just plug the ballast into the factory plug any flickering on the headlights
Hey John I got the HID kit and I have a 2015 ram 1500 with projector headlights. I got the kid you showed plugged it in to the low beam and it won't turn on sometimes it will flicker but never holds on. I got the resistors and they didn't change it. I finally just ordered this obd2 port and got the alpha app. Do you think this will make it turn on, someone please help it's been very stressful trying to figure out. Also the hid will work in my high beam just not the low beam projector. Can I use both at the same time also ?
Did you get it fixed? I’m having the same issue….
@@nicholascollins7050 for some reason 15’s got 9012s not 9005s make sure you get the right ones I ordered the HID bulbs suggested but decided to return them and get regular halogens as the problems that come with converting them are too much.
What bulb type is needed for a 2018 RAM 1500 Laramie?
On Amazon they all say they do not fit my truck. Is this because you need to modify the casing?
Yes
Do the hid kits get to hot with projector lights? Would anything melt
I'd go 35w. 55w do get hot. The innovited kits are fantastic
I ran the hyb 55w kit in my reflectors and the output was amazing, but then the glare shield inside started to look deformed and changed colors. I'd recommend a max of 45w to be safe. Check out the hylux ballasts.
LEDs are far superior. But they need to be installed at 12 and 6. I have them in my wife’s 13 Explorer and my 12 class A MH both have projector lenses. The light output is great. No dead spots and no blinding oncoming cars. Curious to know where the LED sits in relation to the filament on a halogen bulb?
wrong 9 and 3 i have tried done many tests
Damn wang, now try the correct orientation and see BETTER results than you think you have.
@@apossol08he is talking about the position of the housing where the led chip is attached and it should be 12 - 6 position... Once its on a 12 to 6 position, the led chip itself is on a 9 to 3 orientation
LED swap on all exterior lights was the first thing I did to my 2019 1500 Classic. Next thing i did was regret it from all the "light out" codes I get. Not interested in installing all the resistors.
Alfaobd made them all disappear on my 19 classic.
I would recommend to everyone to get some 50w Hylux ballast . You guys won’t regret it. Plug and play and I didn’t had to use alphaobd . I been on a “55w” ballast of amazon and nothing compare to Hylux . Get them off eBay but be aware they do come from Hong Kong I believe .
My hylux ballasts are 45w, and are not canbus compatible. The 35w hylux are. For my 45w ballasts I've had to use the 9006 extension harness to be able to mount the ballasts remotely. Www.thelightingguru.net has the ballasts in stock and available to ship same day.
Dan Stewart the Hylux 50w I have are canbus and lucky didn’t had to get the extensions. I am using Xenondepot bulbs and are way better than the amazon bulbs. I have seen them going for 90 for the pair of ballast but since I get them in eBay I pay 65 for the pair . I been using them on my ram and also on my gf 2016 Camaro and my 14 civic si . I do get the high beams throw a lot at me 😬.
@@muko2002 I'm running cheap Amazon bulbs currently but about to order a set of the xtr 4000k or 5000k bulbs.
Dan Stewart nice but they might yellow ish don’t you think ? Since it’s more wattage on the ballast the color of the bulb might change a bit . I have 6k on it to hace it white but the color drops a bit on mine .
@@muko2002 I'm running 6000k now and they look good, but the 4000k and 5000k offer more brightness over the 6000k, which is what I'm going for.
I have the 35w 9006 5000k and I love them. They have great light output. I tried LEDs in my projectors and the light output is honestly trash. Night and day different HID over LED. Btw anything over 6000k you lose 5-10% light output per 1000k. Food for thought
What brand 9006?
@@frankmarson9829 innovited
How long you had yourself kit on? I installed mine December 6th and they died last night. Trying to figure out if I should try another set?.,
@@travisgraham1005 I've had mine on for well over a year no issues
@@Gearhead2286 do you run yours with the automatic feature?
Hello need help I have a ram 2013 1500 just put in HID kits for Low Beam and fog lights and I can't find HID light bulbs Holder clips. Can someone help. Thanks in advance
Any way you figured this out? Currently installing and have no idea how they are supposed to stay in the housing without the plastic tabs on the sides. My bulb housing is completely round
@nickangel7100 Thanks what it was they sent me high High beam lights instead of low beam. That's why I was not fitting in the housing. I got the right ones now. I Appreciate your help and reply back to me
Any reason you go with 9005 vs 9012 (HIR2) for low beams? Does it matter?
I'm wondering the same thing.
I bought the same kit as you three times. They keep dying on me and I was using the canbus wires
How long did you get out of yours? I put a set on mine on December 6th and they stopped last night.
They worked for about 2 weeks each time. Apparently doing that obd2 app and tell the computer to accept them is how to prevent it. I ended up using the led fog light assemblies he put in on a recent video and for the headlights I put in the sylvania extreme white bulbs and it don’t trigger the computer and still gives the white look
Hid better for projectors
Alguien que me ayude porfavor !!
Cuales puedo comprar para mi ram laramie 2015? Es que me sale error code ???
I don't now wats going on with urs but my LEDs put hids to shame no dead spots....I got the hikari hyperstar 2022... Dam night and day difference
It's actually impossible unless it's a 360 type bulb in a projector designed for halogen.
I build my own headlights with 4 hi/low beam projectors. Don't use LEDs,.. hids are way so much better and focus right on the center of the projector, I'm replacing my 2.5 hi/low projectors to a 3" I'm having 4 with 8k hids plus led fog lights....
Can you not use alpha OBDLink with a iPhone??
No the app doesn’t exist on ios
I dont understand why there is no cut off. Specially projector headlamps. Hmmm. There is something weong with that LED.
by the way im using a XHP70 led from china and its good
I installed LED's in projector headlights, and I can only see 2 seconds ahead, though the beam is bright for that short distance. Flick the high beam and I can provide light for an entire city! What gives?
My hid kit doesn’t even work when I installed mine. Turns on at first start but then they turn off like 5 seconds later with abit of flicker here and there
Our error free kit on ShopBoosted.com is what you need 👍
should have used products offered by Headlight Revolution, they are not cheep. GTR-Lighting and MORIMOTO 2STROKE,
Headlight revolution is a joke as for reviews and stuff, for that reason, I won't buy their stuff. My go to source for lighting products has been www.thelightingguru.net
The owner has literally walked me through a retrofit, put a complete parts lost together and still offers tons of advice after the fact. He sells the same stuff hr does but doesn't offer the bogus reviews the guys at headlight revolution do to try and peddle their products.
I instaled hid lights on at Toyota and i think they have 2 hot 🥵 to make the car turn on fire 🔥 that that’s posible to make yuo car on fire i think
Hid wins again 😏👉🏼 flawless victory lol
HID
Your Amazon Links come back with "Page Not found" Are you still associated with this?
*VIDEOS LIKE THIS HAVE ALWAYS BEEN THE PROBLEM! People have put LEDS in reflectors not made for them or used LEDS in projectors, NOT MADE FOR THEM! There are projectors specifically for Halogen and HID! LEDS are made in different specs for Reflectors, Halogen projectors or HID projectors!!!*
There are specifically made LED Projectors but they are a whole package built together. Meaning non replaceable led bulbs.
I bet money on the gtr ultra bulbs
HID outshines all LED bulbs in a projector headlight. Period!!!
Go with gtr ultra 2 led trust me
All I've owed was mopar. And I've done evey headlight upgrade
No thanks. You clearly didn’t watch the whole video 🤦♂️
@@BoostedMotorsports I did. But ur not using gtr bulbs ur using auxito or we
@@BoostedMotorsports just trying to help I spent more than $2k on hid and led. And have receipts to prove. Had them in every one of my vehicles
I was one of those guys that never wanted led. Always wanted hid 55watt. But gtr had changed my mind
There are way better led bulbs out there
For some reason this video popped up to me...so I watched it about halfway through...the "beam pattern test" with putting a sheet of paper right to the headlight had me dying of laughter :D ... dude, you're litteraly filming this in a garage...backout that truck, point it toward the garage, close the garage door and check the pattern on the door. I bet you will see that the LEDs are actually working just fine, if not better than HIDs. And the "blind spot", that's because you got some garbage LEDs man...try S.V4 or something from GTR lighting - clock it like a normal human being - 3&9 (I have no idea where you got the idea of 12&6 in the previous video), and you can start throwing out all the HID bubls and ballasts to the trash. But then, yeah, looks like you're selling them...that will be hard to move on from...
watch the whole video, then comment
I did...doesn't change a thing about what I'm writing about.
How are you gonna put the LED om the highbeam??? If the truck is high and low in one bulb lol goes to show how little you know about lights
Two separate bulbs for high and low on these headlights bud
It’s a ram there 2 bulbs 😉
You have the wrong kind of led headlights for one no wonder u have dark spots go on Amazon and type audew led its a true led bulb that is wrapped the whole way around with leds I have them in my ram there crazy bright they make hid bulbs look like weak sauce for sure
The led still won't match the hid in brightness. I've done it. I've put a 55w led in and compared to a 45w hid. The hid was brighter. By a good margin too. Those audew bulbs are only rated at like 30-35 watts anyway. On top of that, led lose efficiency over time. It's not uncommon for them to lose 15-20% brightness over 30 minutes or driving due to heat management.
@@hunterdan2002 buy a set and see the difference there crazy bright and the led bulbs out last a hid bulbs no doubt. I also have them in my kia Optima it has projector lights and instead of judging buy a pair from Amazon they have great reviews compared to a hid bulb
@@joshuaknows8273 I've thrown several types of led bulbs in projector housings and none of them have been brighter than the hid bulbs. Just tried a set the other day, put them in, compared them to the hid and took them right back out and sent them back to Amazon. The hid was simply brighter. Feel free to send me a set and I'll try them, but the next thing I spend money on is an actual decent set of hid bulb instead of the Amazon specials I'm running now. The Amazon bulbs just aren't quite lined up right and the pattern isn't as crisp as it could be. But they are still brighter than the leds I've used.
Hid not even close
HID's are awesome as long as they don't burn the reflective coating off the projector bowls, Stupid fucking Camaro.....
Hey this is Winston and I would love to talk more about the hid kit can I email you?
Wow the new ballast boxes are way way smaller than the ones I bought back in 2001