Good instruction from start to finish and one video. Not like someone else on TH-cam who wants you to watch a hundred videos with bits of information mixed in incoherently.
Great video thanks for making it by any chance do you no what the torc nm is on the bolts on the Warter pump and the 4 fan bolts I'd appreciate it if you can help 👍
Hi, thanks for the awesome video Just to confirm, you said 35mm socket to tap the cam seal in? I am to change the seal in a few days and when checked, the seal looks to be fitting to a 32-33mm socket
Thanks for the content . You mentioned you were from Adelaide ?? Are you a qualified mechanic with a shop or something?? Have just purchased a 150 series V6 Petrol so would love to find a mechanic who knows his way around Prados (I live in Adelaide too) cause I know very little !!! Thanks again
When you remove the cam shaft sprocket bolt do you hold the crankshaft pulley with a socket and likewise when you tighten up the cam bolt do you hold the crankshaft pulley with a bar and socket .
Thanks for this guys ! When I pulled the timing belt cover off the belt wasn’t lined up with the top of the cam markings - am I right to just turn the camshaft until they are in line and THEN take the timing belt off? Or do I need to turn the crankshaft to get it to line up Thanks
Heya, Thanks for watching, Turn the crankshaft till the crankshaft is at top dead centre ,camshaft is at top dead centre and the fuel pump is at timing Mark as well. D
Good instruction from start to finish and one video. Not like someone else on TH-cam who wants you to watch a hundred videos with bits of information mixed in incoherently.
Dont forget to do the bearing in your air conditioner compressor too
Great video thanks for making it by any chance do you no what the torc nm is on the bolts on the Warter pump and the 4 fan bolts I'd appreciate it if you can help 👍
Hi, thanks for the awesome video
Just to confirm, you said 35mm socket to tap the cam seal in?
I am to change the seal in a few days and when checked, the seal looks to be fitting to a 32-33mm socket
Heya ,thanks for watching.
Yes definitely used a 35mm socket.
D
Top notch, thanks.
Thanks for the content . You mentioned you were from Adelaide ?? Are you a qualified mechanic with a shop or something?? Have just purchased a 150 series V6 Petrol so would love to find a mechanic who knows his way around Prados (I live in Adelaide too) cause I know very little !!!
Thanks again
Do you happen to have the part numbers of the serpentine belt bearings?
When you remove the cam shaft sprocket bolt do you hold the crankshaft pulley with a socket and likewise when you tighten up the cam bolt do you hold the crankshaft pulley with a bar and socket .
Nice video. Were you able to push the bigger tensioner bearing in with a vice too?
Yes
Can you tell me size of the bearings on idle pulleys and tensioner pulley?
Sorry no , I purchased a kit with them all in it.
D
Hi mate great video, whats the torque specs on all the idler pulleys?
Thanks for this guys ! When I pulled the timing belt cover off the belt wasn’t lined up with the top of the cam markings - am I right to just turn the camshaft until they are in line and THEN take the timing belt off? Or do I need to turn the crankshaft to get it to line up
Thanks
Heya,
Thanks for watching,
Turn the crankshaft till the crankshaft is at top dead centre ,camshaft is at top dead centre and the fuel pump is at timing Mark as well.
D
@@DIYIT13 thanks I appreciate the help 👍🏼
Thank you sir, are you located in Melbourne
No Adelaide
No good for Melbourne us, I’m thinking to buy one of them secondhand
@@DIYIT13 what is the torc speck on the water pump bolts nm I think you said 13 but can you check for me please I don't have the book
Did u use gasket glue on water pump?
No ,just a new factory gasket.
D
Thanks. for replying .happy new year