well M401 gel blaster review and gearbox upgrade (POWERFUL)
ฝัง
- เผยแพร่เมื่อ 31 ต.ค. 2018
- in this video I take a look at the well M401 and install the gearbox upgrade.
buy Well M4 here: s.click.aliexpr...
upgrade kit: www.gelballmod...
don't forget that if you really like my content you can always buy me a coffee:
buymeacoff.ee/... - วิทยาศาสตร์และเทคโนโลยี
That first chrono test had me giggling. Straight out of the box. Top stuff.
I like the clear plastic idea, "yes, you can see this is an electric toy...."
350 FPS this is a great upgrade your OCD is greatly appreciated I wonder how the accuracy test will go, with the stress on the gel ball I’m sure will be flying out all over the place will definitely need a hop up to help with this power increase milky whites would be the choice of gel I wonder how gels will perform in a few more months of research and development
I had a quick play on my 20M range with milkies and accuracy was promising...
That’s the news I was hoping for bloody fantastic have you thought of doing up metal gear boxes and reselling them so people can just drop em in to their wells?
I did this same upgrade to my well m4 and the new spring was so powerful it cracked the receiver. Then I tried supergluing it together and super glues the tapper plate as well fml
Just a note to everyone who has the wells. You can put the bruisemaster barrel on. 9.5mm drill bit on the plastic barrel/t pice bit of time but "well" worth it. Also slight mod to the upper reciver.. Also 9.5 mill on the nylon tip to fit it through. Working on the 14mm barrel addaptor ring. Could have the wells fitting most of the gen 9 gear
It took me a year to finally grow on me, but I finally got myself one for Xmas as well as a metal gear set 😅 gonna make her a hitter
Ordered one the other day, not sure if I want to upgrade it, I already have a JM gen 8 M4, j10 ACR and M97 Shotgun I cannot be assed taking apart to fix. Seems to do just fine bog standard.
Thanks for the tuturiol on the upgrade, it helped a lot. I had to re-solder my blue mag primer wire too. LOL
Sick. I'll be picking one of these up. Edit: picked one of these up
I think this has to be the #1 blaster out of the box at the moment.
I hate to be the bearer of bad news but I installed the exact same mod kit and the gearbox cracked. The kit is still superb but maybe consider using a slightly weaker spring. Now I gotta buy a Fightingbro gearbox and mess around with it.. More money to blow hahaha
There needs to be an AK with this type of stock performance, at least above 250fps. STD AK-47 v2 is almost there at 240 (sometimes)
The CP AK variants hit hard, while I don't own a chrono to test them with, the fact that they break the skin at over 10 metres away should give you an indication of their velocity. Just saw the new lineup of AK's on tac edge, jfc, full metal and wood for a cheap price of $600, if I wasted that much on a blaster I'd expect it to do 400fps and punch holes through a corrugated iron fence, like our slug guns used to do back in the early 90's.
Be aware that the back spring tappet is quite weak on the Wells M4, and upgrading springs has resulted in broken gearboxes. Some have fibreglassed the rear spring holders for additional strength.
yeah I noted that the spring retainer looked a bit weak.
it strips the wires as it pops out. I reverted to original 7.4v batt and find this may prevent it.
are you talking about the spring retainer? would this metal one solve the problem?
www.renegadeblasters.com.au/product/metal-spring-retainer-for-well-m401/
In regards to the polarity markings on the motor it’s worth checking before you refit the motor I stripped out the plastic gears on a well mrt because they were marked wrong and ran the motor in reverse
I am new to gel blasters and Your video helped me decide between Wells and JM J9. So I got the Wells and the upgrade kit. Could you please do a video on how to reinforce Wells so the upgrade doesn't break the gearbox? I've seen metal spring retainers but somehow I don't believe they would be much help because they are still held in a plastic shell. Most of the parts terminology used is Swahili to me LOL.
Thank you your video was quite helpful and i made a custom spring retainer clamp that's removable without disassembling the receiver
I can imagine 'Gel Blaster for Dummies' by Low Guido Chop Shop hitting our shelves one day. 😆
Awesome job, been waiting for this. THANKYOU
Just bought one of these and the stage 1 upgrade kit from gelbalmod, what type of oil/grease should be used and can you tell me we’re it can be purchased from?
could you do a video on the wells g36 v2
Hey Low Guido, I was just wondering what gear ratio you used in the installation, and also, I already have the upgraded spring for my wells, but what If I were to put just the full cylinder in, could that damage my blaster? (Reasoning for just the cylinder, is pricing wise because I saw a lot of comments saying that their kit that they ordered wasn't working (e.g 76aussieguy), and other retailers sell gears for around $50) Thanks.
Where do you get the shims from? Can’t wait to see more hop up vids for this gun!! Just ordered the hop up kit but need shims obviously. Also what battery you using 7.4 or 11.1?
Hi may I know what’s the ratio of your gear that u use in this video? Thanks 🙏
you bloody legend, should give you a knighthood for services to the gel blaster community. have you had higher fps on a blaster?
I actually put a bigger spring into this one and got 364fps. I have also had a 350fps gen8 scar.
mate i put the same kit into mine(it arrived the day before you put this up) and the gear that drives the plunger dosent reach it(the plunger that is) havent counted the teeth of it or the stock one. could the plunger be a different size? cheers
@@76aussieguy i bought another kit the same and tried to put it into another wells, and the plunger is too small.. or should I say the gearbox is too big? A lot of people have contacted me with this same problem. It would seem that there is discrepancy between wells gearboxes. I must have got lucky with this one.. or unlucky with the next? One thing is fo sure the wells plunger is bigger diameter than gen8 and m9st 9f the plungers on the market are gen8 compatible. There is only 1mm in it. I have spoken to a few wells owners and there is no sure fire plunger replacement. It seems hit and miss.
@@lowguidoschopshop ok, thanks mate... looks like I'm buying some plungers
im already got 400fps..thats my secrets
Its a polycarbonate and its actually stronger when its clear something with pigment/dying process actually makes it weaker
Hey mate love the Vid, awesome stuff haha. I personally just ordered one of these kits and was just wondering how long it took for it to arrived to you roughly
Just got this blaster... is it normal to end up with a few gel balls in the mag well when you remove the mag? My blaster doesn't seem to fire a gel every time i pull the trigger - semi auto mode. Awesome mod vid by the way! Thinking i might give it a go.
it normal, it happens with my blaster too
Could be the air seal nozzle, the rubber seal may be sliding off the nozzle and blocking the bullets from feeding through. Happens a lot to mine
Yeah it’s normal
Does the stock cylinder head just push out of the cylinder so you can put it in a upgraded full cylinder? Or is there some trick to it
Is it ok to run an 11.1V battery on the stock Motor?
Yes
Replaced the cylinder to the same non ported and lost fps, i assume airleak around the cylinder head, any way to properly seal it better? Silicone?
M8 you are bloody awesome love watching your videos 👍
The reverse gear catch thing came out how the hell do i get it back in lol dammit
Yeah how did you get the damn thing out?
@@chrisgraham8368 haha all good i figured it out, it just flicked out when i opened the gearbox to replace o ring
reverse gear catch: trolling every single person who took apart their gearbox since 2015
i'm waiting for mine to arrive!!
Hey mate, love the video. Just wondering how you got a good seal between the cylinder head and the new cylinder? Thanks
I just put a little bit of sealant around it.
It wont break the gearbox if u upgrade the spring and the motor?
In ur opnion is this the best blaster to buy and upgrade?
I reckon for the price by far - $160 on eBay atm
will this upgrade kit work for the m406 the cqb or is it a different gearbox
if it wont work do you have a link to a kit that will work
I twisted the cylinder head so the part of the tappet forms a bit of a seal around the hole in the original cylinder that shortens it, a lazy free little trick that gives lots of extra fps, at no extra cost even with an otherwise stock M401.
you mean you are blocking the port in the cylinder? sorry I don't follow
Yes, you just twist the cylinder under until you can't see the port, I've done it with two different Wells blasters (one upgraded and one stock), I wish I had a chrono because the the upgraded one was already tested at over 300fps a few days ago, and now feels a lot punchier.
Nice timing. I had just started hunting for vids on the Well for my next project when the notification for this popped up. Apparently there are black nylon receiver kits available. Does the Well have an ally barrel stock? Also very interested in your next video about shimming (not so much the gears, but the motor height adjustment).
Hate disappoint you, but I'll be shimming a gen8. Albeit a bit less neccessary than the wells box. That thing NEEDS shimming. Gen8 can get away without it sometimes. As for the barrel on the wells i think its plastic? I didn't need to strip that part down so I didn't..
@@lowguidoschopshop Well, when you do your motor upgrade video I hope you explain adjusting the motor height.
Has an alloy barrel. Inner and outter
Does the receiver split like the gen 9 M4. Or do you need to tear down the hole thing
Does this kit fit the wells M403 ?
Any chance you'll look at the Stage Two kit GellBallMod made for the Well M401 too?
Has everything this kit has, plus a new motor, cylinder head, t-piece, etc.
Would like to know if its worth getting, or to just do the mods in this video for ~350fps average and reliable.
Hey brother low guido do you know if there is a swap in barrel for the wells all i can find is the 9.5mm x 7.0mm cos the wells is a 9.0mm outter
I picked up a Vector V2 for my son, looking at one more for me. In terms of modding, ball velocity and accuracy, is the M401 still the best option? I intend to upgrade both with upgrades from Gelballmod.com
did the standard cylinder head fit tight in the new cylinder??
Hey Guido, I tried buying this from their website but at the checkout it didnt let me change the payment method. Need help. Thanks.
hi bro, why don't you try convert the gel blaster to airsoft mode (bb 6mm) ???
It’s illegal here
My spring keeps jumping out,I cant stop it.. also does not shoot gel pellets aswell
It helped a lot thank you
How long does the shipping usually take from gelballmod?
Just bought the WM4 ran 10,000 rounds through it sweet as pie. Put the 11.1V battery upgrade in and ran another 1000 rounds through. My issue with the 11.1V makes the spring hub bounce out out of its seat. Went back to the 7.4V and it still jumps out of its seat. Short of gluing it in there is there a less permanent way to keep it in place? Really happy with this product in all other regards.
Upgrade it to a metal one. Or run a bolt through the back of the gearbox through the receiver.
hot glue it...will temporary seal it...hehe
I got a Wells M401 and the spring release keeps flying out of the back of the blaster does anyone know how to fix it?
links are dead.. any chance u could update them?
Id love to but the stores I got it from no longer exist.
Hey mate I just watched this video on this m4 would you recommend it to buy And get the upgrade kit
there is a new revision out now that is better than this.
Ok what is it have u got links mate
Did you end up finding the new version. Interested in knowing myself 🤙🏼
Is that the wells v1
Yes, I have the same
The receiver is made from polycarbonate
which one stronger? polycarbonate or nylon?
After buying this upgrade I noticed that the spring is too large and when compressed into the receiver it bows. I was looking at your video and it appears to have the same problem I encountered. Is this an issue when firing the gun as the plunger needs to move up and down around the spring?
It didn't seem to cause any issues and straightened out with a little bit of a play around.
Is there a reason that the body of the M4 is transparent ?
Did this upgrade the gears wouldn’t pull the plunger out it sat in the barrel grinding
You may to set the motor hight with the screw in the bottom of the pistol grip. Also make sure your motor shim didnt fall out.
Where are you based and how much to do an upgrade? Dont wanna stuff it up
How tf do you get that pin out at 12:12
punch and pliers
@@lowguidoschopshop haha awesome thank you. one more thing, I am having an issue with my blaster where the trigger mechanism isn't engaging with the switch and when i opened it up it was fine but when putting it back together after just a few rounds the trigger becomes unresponsive.
@@Henry-yf1nw just make sure the trolly sits on the top of the trigger correctly and lines up in the rails.
Where did you get your shims from and what size were they..
I hope you do a review and breakdown of the new full metal wells m4????
My spring guide pin keeps coming undone and ripping my battery leads apart when it flies out ' also don't know why they decided on using a ported cylinder ' if you love this gun then check out metal upgrades over at Hawkex tactical
I hope you see this and reply
Is it has to be green o ring?
Why not black or yellow o ring?
Thx you so much man
@Low Guido's Chop Shop
Hahaha colour doesn't really matter. I have a bag of good green ones. You can also get good ones in other colours as long as they sre a good quality seal they're fine.
@@lowguidoschopshop and how about the lubricant?
Grease or oil?
can cyma gel blaster gearbox fix into nwell m4?
Hai bro...did you have well m4 nylon reciever?
Just curious if you'll be doing a, distance and accuracy test for this blaster? I'm looking at buying my first blaster and can not decide between the wells or JM gen8 m4a1 I really want something that is accurate and and shoot the distance, I don't mind having to grade to get there just not sure which blaster to start with.
yes I will be doing this.
Can you not put the handle and motor on to test before fitting it all back in receiver?
Yeah you can. But then you have to take it off again to put it back in.
Would it be possible for you to do a fps chrono with original spring with those mods to get a full proper idea of mods and cylinder without vents pls?
can you fit this gearbox into j9 body ?
Are the gearbox internals ie. Gears, cylinder and cylinder head compatible between the g36 v2 and the m4a1?
I have been told there are slight deifferences, but what they are I do know exactly. What would be cool one day is an online Gel Blaster 'magazine' like we have with some car magazines, reveiws, comparisons, longer term durability test, venues, retail outlets, laws and regs etc.
Just got my well m401 in the mail today, gutted to find out it’s one without mag prime. Have you set up the forward assist as a mag prime before?
well m4 has a mag prime, on the select fire, youll hear/feel a click just before you move it to semi. pull and hold the trigger in that position to prime the mag
@@KurtizmoRAGE i tried this several times and couldn't get it to work .
I recommend keep trying, its there. Took me a while the first time
@@KurtizmoRAGE not all wells m401 have mag prime for some reason? some even come stock with metal triggers
oh okay, yeah mine had a metal trigger... might have something to do with it?
I bought this blaster and did the full upgrade and im still only shooting 280-290 fps, any tips on what i might have missed?
Double check all your air seals.
Is there any secret to loosening the screws on the gearbox? Only a couple of them come out easily and the other screws start to strip the harder I turn the screw driver.
the secret is to use the correct size screwdriver on the screws. there are a mix of number 1 and number 2 Phillips head. dont use a number 0, or a pozidriv screw driver on any. its also tricky because the number 1 Phillips drivers are often too thick in the shaft, so the tendency is to want to use a 0 which will strip the heads.
Thank you
Hey im just wondering have you cracked your gearbox or receiver yet with them upgrades?
nope
Will the trigger setup burn out a
With a 11.1v battery and where can you buy a new switch if it does . cheers
Trigger switch will be sweet man
Still can't believe the 70+ fps gain from just the upgrade kit. Did you put some magic in as well?
I did nothing other than install the kit.
Why didn't you change the cylinder head? Just bought the well v2 I'm guessing it's pretty much exactly the same except for the the engine
I only used what came in the kit.
Yea I thought as much... I got the upgrade kit... and bought a cylinder head as well just because hopefully goes just as good as this one
Your videos are unreal dude plz keep them up! Any idea on when you'll be finishing off this badboy?
this blaster is done. watch the drum mag, SLS sight and WARFET videos for the full story
@@lowguidoschopshop oh Nice! did you end up putting the upgraded motor in?
@@toesic yeah the motor is discussed in the WARFET video
Hey mate just got this upgrade but the spring is too long .. should i compress it down into the gun or cut it to size ?
Dont cut it. If you do you will lose most of your upgraded power. Just push it all in there
Thanks mate !
hey love your vids do you sell any upgrades like an wells gearbox with all the bells and whistles already to go. for some $$$$$$$
Hey mate the little clear rubber nozzle were the balls enter the chamber on my m401 keeps coming off wat should i do do i need a new one or can i just glue it back on
Glue it back on mate
@@lowguidoschopshop thanks mate
What link is the shim stack?
Awesome info Cheers
With the Cylinder are they all the same Well or Jinming?
Wells is a touch shorter
@@lowguidoschopshop thanks for the reply. I notice there is a small gap do you know if the gen 9 one will fit a Well gearbox?
@@198Wrighty no. While it can physically fit the operation of the blaster depends on the smaller cylinder.
@@lowguidoschopshop thanks
Are the gears the same as the gen 8 please reply i really need to know
They are close enough to be interchangeable.
Isn’t this basically the jinming gen9 but looks different and is more powerful
no. 2 very different blasters
Which on can you recommend
Is the outer barrel alloy? Your review side of things is lacking info bro. Id on inner barrel would be nice to
Inner barrel is alloy.
The outer barrel is metal : watch the 2nd X-force vid for additional info on the Wells
Hay mate - awesome stuff!
But could u help me out here - Ive been trying to figure out what the Wells Tappet plate elbow is for ? - that dog leg looking thing - just under the cylinder head inside the mag well.
Coz to me it just seems to do nothing besides weaken the case ? ( & stop other brand mags being used ? ) & any Suggestions on how to fix the case hole if I removed the elbow part & also any ideas on fixing the spring retainer hole ?
Thanks again for all your hard Work & TIME - like putting these videos together for everyone- it’s great work!!
it took me a while to work this out myself. But I can finally confirm.... It does nothing.
No really, it doesn't do anything. it is there as a legacy, because the earlier versions of the well or nWell blasters has a mechanical mag feeding mechanism that would push a lever on the mag to mechanically feed the next ball up into the chamber. I suppose this means that you can still use the older well mags in this version blaster. but if you have the correct mags it serves no purpose.
Low Guido's Chop Shop - ok awesome mate , thanks for confirming that &
ALL the WORK YOU DO! - will be definitely buying u a coffee👍 or donation to keep u going.
Your work & detail is great & helps a lot of Us - & there is a lot of differences between AS and our GBB , just been rewatching your vids to help finish off the Wells build.
I ended up cutting the tappet elbow & still deciding on fiberglass or something to fix the hole left & cracking issues besides cutting / rounding the corners in the shell & was just about to start wiring up the mosfet - but so glad I watched ur vid on it again because I was literally just about to commit to solder both black wires to trigger terminals 😮 but after your vid & explanation I didn’t make that mistake so 👏👏👍 thanks again mate - awesome work! - U really the only out here doing this !!
Can u put up ur PayPal Acc?
@@Jonb782010 you can email me deelowguido@gmail.com and i can give you my PayPal, but a few coffees is just as good.
So the semi auto actually works? Not like scar v2?
Yes. Well m4a1 has semi auto. The SCAR doesn't. The gen9 has semi
Thank you Mr Guido
the receiver is made pf polycarbonate
How accurate is this blaster after mod?
As far as gel goes. Pretty accurate.
Just put this kit in my gun but it won't run the new spring because it keeps derailing my plunger!! Do you know of any fixes for this Guido?
make sure that the plunger is seated well in the rails and the gearbox is tightened together well, other than that I cant think of any reason why that would happen..
@@lowguidoschopshop Ok welp, looks like I'm pulling it all apart again hahaha, cheers for the advice Im sure it will be helpful 😊
Mine.. happen the same too ..the plunger body kinda small compare to nwell original parts..
Where did u buy the m4a1 from I’m looking to buy one
eBay - $165
I installed this mod, for some reason it keeps failing to pick up the ladder gear. I just emailed gelbal mod today to see if they have any advice, thought I would ask you as well.
I didn't have this problem with the fist one that I did in the video. then people told me that they did have a problem. I ordered another kit and installed it on another wells and the plunger was too narrow @~21mm it kept popping out. I ordered 2 more different plungers and of the 2 I ordered one of them was ~22mm and there were no problems. it seems to be a manufactuing tolerance issue with that plunger, some fit some don't..
@@lowguidoschopshop Thanks for the reply, I will take it apart again and re measure, but from just looking through the gear box a 1mm tolerance issue could well be the problem. Thanks man.
Is gelballmod.com sketchy?
To the God of Gel Warfare Guido - Mate Ive had my Well's now for 3 days and am really blown away by the build quality etc, I am getting around the same FPS stock.
I was wondering if you could tell me if I did just a simple spring upgrade and keep using a 7.4v LiPo what sort of FPS could I expect.?
I am more of a precise target shooter than a Sprayer ( Im 51yrs old btw ) and enjoy things like trying to knock a bottle cap off the back fence @21m with just single shot or very short bursts at most.
As you more than likely understand the physics behind aerodynamics, I find that it is Not as it appears that the Well's is not accurate but to try and keep a squishy projectile on coarse is virtually impossible at these distances. without the aid of a spinner or a "Hopup" as I believe you guys call them. So I have gone ahead and ordered one from Zhenduo on eBay to suit the Wells.
In your experience, will this improve single shot accuracy after screwing around a bit trying to find the sweetspot of the Hopup? and as mentioned a spring upgrade to perhaps get me to 300fps?.... Is this a good idea and if so what gauge/length/count spring do I need seek to achieve this?
Thank You in advance to you God of Gel Warfare or anyone else who may be able to assist me to achieve the above mentioned.
Best Regards,
Skorp † Western Australia, MidWest Coastal Local - Peace.
Gel as a general rule is just not accurate. The best thing you can do with the wells is put a hop up on it and use milkies. the stock fps is quite adequate.
@@lowguidoschopshop so dont put another spring in?
@@Top-Jimmy you can, but the standard wells plastic box will break very easily if you go too hard
@@lowguidoschopshop Ok cheers matey. Wont touch it
@@lowguidoschopshop Thinking about your reply here again. I just watched the video in its entirety again and I cannot figure out why you don't recommend to do this. - "Throw a hopup on it and it'l be fine"
To me its a massive improvement and the exact same upgrade has been applied to mine. Using Milky's Chrono @ 370 - 380fps.
Any reason you said what you did in my previous question mate? Cheers
would the upgrades work on a m4a1 gen 9
Low has a vid on the Gen.9, check it out.
What hop up do you have on the end of the wells man?
Best one Ive tried for this blaster is the one by Canetoad - Easily found on eBay
dude what's shimming?
Did you have any trouble importing this into Australia legality wise? Cause i wanna get one for my wells
There is no problems importing parts, only blasters.
@@lowguidoschopshop anywhere in Aus you know of?