Clutch Bleeding - Nissan Micra K12

[@graememyall9758]

Thanks

[@screwsnutsandbolts]

Thanks for the support Graeme, I really appreciate it ! 👍👍

[@Adamadam889]

Just picked up an old k12 last week and my friend pointed me here, you're a life saver

[@screwsnutsandbolts]

Thanks for watching ! :)

[@screwsnutsandbolts]

Parts and Tools:
🚗 Quick Connector Bleeder - amzn.to/446Ilf7
🚗 Plastic Tubing - amzn.to/3JP7p1J
🚗 Brake Fluid - amzn.to/44HGixB

[@screwsnutsandbolts]

@FUK-ULEZ Did it come off or actually snap ?

[@screwsnutsandbolts]

Ah well done ! :)

[@berndb.5097]

I recently asked myself what kind of strange plastic line that leads to the slave cylinder is.
Until now I only knew rigid lines or such reinforced rubber hoses which are also connected to brake calipers.
Thanks for your effort 👍👍

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@antoniosocorro6841]

I'm glad to be back at home so I can learn from you. Thank you very much for sharing your knowledge. I haven't been able to watch them for a month.

[@jean-marcknight8816]

Oh lord algorythm, accept this comment as a sacrifice to make this man justice and recommend his videos ! 🙏

[@screwsnutsandbolts]

Thanks lol :)

[@davebolowski7925]

Amen 🙏

[@tomslover7512]

Perfect video. To the point and all the information needed. You are the best. Thanks a million.😊

[@screwsnutsandbolts]

You're welcome, thank you !

[@giuseppedavi7229]

Sorry for the dumb questions, but why should i bleeding the clutch? What are the symptoms that can lead to bleeding the clutch?

[@giuseppedavi7229]

And another question, i have the diesel version what oil should i use if I need it to bleed the clutch?

[@screwsnutsandbolts]

Change of the pedal travel, difficulties when disengaging the clutch or the clutch pedal may feel 'spongy' when pressed.

[@screwsnutsandbolts]

The clutch fluid is the same whether it's a diesel or petrol engine. Is you car the same model Nissan Micra like in the video ?

[@screwsnutsandbolts]

It should state the type of brake/clutch fluid required on the fluid reservoir cap. In this particular vehicle it's DOT 4 brake or clutch fluid.

[@giuseppedavi7229]

@@screwsnutsandbolts yes is the k12 1.5 65hp from 2003

[@Adam-mb1jn]

Hey quick question as I'm stumped looking for answers online.
2004 K12, clutch was replaced a while back due to wear after I bought the car, however the clutch pedal biting point has always been insanely high up, to the point I can move the clutch pedal a few cm and shift without issue.
Anyone know what could cause this/ how to fix it and move the pedal biting point lower? I've also read micras do have a high biting point in general, but surely not this high.
Any help would be appreciated. Thanks.

[@screwsnutsandbolts]

I'm not so sure, a lot of people in online forums have mentioned the high bite point in a Micra K11 and K12 so it maybe normal for certain cars

[@nazmilo9379]

Do you have any idea why my car can still move forward when the engine is off and when it is in gear and pushed?

[@richardtrudgen7665]

Thanks!

[@screwsnutsandbolts]

Thanks for the support Richard, I really appreciate it ! 👍👍

[@parthautotechnician6051]

Thanks sir

[@screwsnutsandbolts]

You're welcome !

[@louisnii-anangadotey8680]

Pin not locking. What should I do

[@SweetVids2010]

I had the same issue I think my clip was the reverse had to push down and pull the pipe out at the same time.
It rested in the up position, I think there is two versions on this the one in the video and the one I had.

[@rajahthaasan5118]

Where is the slave cylinder located on this car??

[@lukaszteplik1922]

What engine is it 1.2?

[@screwsnutsandbolts]

This is the 1.0 liter petrol

[@raveno9126]

Has anyone got any idea where to get a new locking pin? TIA

[@screwsnutsandbolts]

I had a look but I can't find a part number it anywhere

[@markwilliams2830]

[@screwsnutsandbolts]

Cheers !

[@mike-s8n8y]

Push down on metal clip

[@Yannmusichit]

🫡🫡🫡