Wonderful video! You are very talented! Very good! !! Thank you for sharing this inspiring video. I support you. I learned a lot from your work. I respect you.
Great video as allways - thanks! Could you provide us with a link to your source of polypropylene sheet? This kind of material is really hard to find in Europe. And how did you build your spraying-box? It would be great if you could make us a video about that too.
Exactly. It's hard to get wide size polypropylene sheet. You can use Mylar(PET) sheet instead. The one of thickness 0.25mm is easy to use. 0.35mm brings better surface but you need to scrape the leading edge of the sheet to fit the 3D curve of wing.
Excellent video, I was very confuse about this painting transfer. Do you use the 0.75mm polypropylene just for finish, it´s looks better or it has another use?. Could you tell us the paint do you use? is it acrilic? how should I ask at the paint store ? acrlic paint for cars? thank you very much
0.75mm polypropylene is for the "Bagging" You can see the whole process of bagging on the video bolow. th-cam.com/video/btvDO7yWlqU/w-d-xo.html As for the paint, they are general acrylic paint for models. Product name of base white : Mr.base White 1000 Mr.Hobby
One question, how much vacuum are you pulling? Your wings look super smooth, but mine still show some irregular surface even with thicker mylars, I suspect I have too much vacuum...
I think not so strong vacuum pressure is necessary. Mine is below(-33.3KPa) www.nitto-kohki.co.jp/prd/search/syousai?seihincd=LB08221&lang=ja&groupcd=L
@@sibylvane75 Well, if you do not know anything about painting and vacuum bagging wings, then it may seem a little bit confused, but I can assure your that this is one of the best and most clear step by step video Tutorial you can find. Bless you too! All the best!
Wonderful video! You are very talented! Very good! !! Thank you for sharing this inspiring video. I support you. I learned a lot from your work. I respect you.
Thank you for your tips. Also your English subtitles are very clear.
Really helpfull videos thanks 🙂
Terimakasih artikelnya sangat membantu buat saya
Great job!
Respect.
Very detailed as always!!!
Good work
awesome video as usual... thanks!
Great video as allways - thanks! Could you provide us with a link to your source of polypropylene sheet? This kind of material is really hard to find in Europe. And how did you build your spraying-box? It would be great if you could make us a video about that too.
Polypropylene sheet is also hard to get here recently, but I will check later.
As for the spray box, I will show you near future.
Try to search for Plakene, it is his commercial name.
good video, very useful, where did you get the polypropylene sheet?
Exactly. It's hard to get wide size polypropylene sheet.
You can use Mylar(PET) sheet instead.
The one of thickness 0.25mm is easy to use. 0.35mm brings better surface but you need to scrape the leading edge of the sheet to fit the 3D curve of wing.
Excellent video, I was very confuse about this painting transfer. Do you use the 0.75mm polypropylene just for finish, it´s looks better or it has another use?. Could you tell us the paint do you use? is it acrilic? how should I ask at the paint store ? acrlic paint for cars? thank you very much
0.75mm polypropylene is for the "Bagging"
You can see the whole process of bagging on the video bolow.
th-cam.com/video/btvDO7yWlqU/w-d-xo.html
As for the paint, they are general acrylic paint for models.
Product name of base white : Mr.base White 1000 Mr.Hobby
How long it takes between painting and laminating/bagging? Should the paint be totally dry before you apply CF and epoxy?
Yes, apply CF and epoxy after the paint dries. Usually several or one week after paint.
One question, how much vacuum are you pulling?
Your wings look super smooth, but mine still show some irregular surface even with thicker mylars, I suspect I have too much vacuum...
I think not so strong vacuum pressure is necessary.
Mine is below(-33.3KPa)
www.nitto-kohki.co.jp/prd/search/syousai?seihincd=LB08221&lang=ja&groupcd=L
nice, how much weight will be added ?
3-4g I think.
@@kousakunin2008 thank you responding, really great job, and you still wax the 0.75mm before adding the paint to it ?
No need to apply wax.
@@kousakunin2008 was going to make this question.
are this mylar plastic reusable? i mean you can use again?
Reusable. I have used it more than 10 times
A little beat complicated? No?
No.
@@ladraode9dedos409
After this answer all Is clear
@@sibylvane75 happy to help!😉
@@ladraode9dedos409
God bless you
@@sibylvane75
Well, if you do not know anything about painting and vacuum bagging wings, then it may seem a little bit confused, but I can assure your that this is one of the best and most clear step by step video Tutorial you can find.
Bless you too!
All the best!