Centurion D6 Smart sliding gate motor installation in Randburg by Pottie 083 778 2288

Centurion D6 Smart sliding gate motor installation in Northriding Randburg Johannesburg by Pottie 083 778 2288.
Pottie from Exquisite Security/ Smart gates is well known in the Centurion sliding gate motor installation and repairs market.
With 20 years experience in the installations of all makes of gate motors, it is clear, that Pottie has seen and done it all.
The knowledge Pottie has, with Centurion sliding gate motors is huge.
Pottie, is one installer who can and will repair/ service/ maintain any gate motor on site. There is no need, to remove a gate motor from site as all is done, on site. This includes, all models of Centurion sliding gate motors, Gemini sliding gate motors as well as the DTS range of sliding gate motors.
The reason is that the listed gate motors above, parts are easily sourced.
This client found Pottie on the web, and requested that Pottie perform a Centurion D6 Smart sliding gate motor installation for him as his Centurion sliding gate motor was stolen earlier the week.
This gate motor installation was conducted on 15 November 2024.
1st. The site was inspected, where and what was needed in order to perform the Centurion gate motor installation.
2nd. The concrete platform was cut open to allow the electrical cable to fit into the slot. A Slot was cut in the steel platform which allowed the electrical supply cable to fit through. The steel platform was then welded into position and secured down completely with the needed coach screws and existing steel posts which are secured into the ground.
3rd. The complete gate motor system was then test fitted into position, which allowed for the gate motor steel base plate to be spot welded into position after making sure that all the spacing is correct.
5th. The gate motor specifications were checked and found to be right, this allowed one to weld the gate motor steel base plate down completely.
The gate motor was then secured with all of its supplied steel bolts.
6th. The steel rack was then welded into position, according to factory specifications. The steel rack was also supported with steel brackets on the ends.
7th. The gate motor electrical wires were then connected, the gate motor batteries were connected and double checked for correctness.
8th. The gate motor limits were set by using the Mycentsys pro app.
10th. The client was informed, what to do, and how to do things via the Mycentsys app. The site was handed over to the client.
a generic anti theft bracket was fitted to this gate motor.
Extra steel was welded into position, to prevent a easy theft of the gate motor.
The gate motor serial numbers and clients cell phone was also engraved onto the gate motor to prevent the theft from occuring.
We repair all Centurion sliding gate motors, especially the Centurion D5 Evo sliding gate motor on site, no need to remove a Centurion gate motor for a service.
We do it all on site all guaranteed with customer satisfaction.
For more information, please look here regarding gate motor installations in Johannesburg:
www.exquisites...
for info look here:
www.exquisites...
also see this:
www.smartgates...