Mowei Galaxy S23 Ultra Tempered Glass Screen Protector With Liquid Adhesive
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2023
- Buy on Amazon
MOWEI Privacy glass with liquid adhesive - amzn.to/3kdMAnk
MOWEI Clear glass with liquid adhesive - amzn.to/3YDyf2p
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the Amazon product links, I’ll receive a small commission. This help support the channel and allows me to continue to make quality content!
@SamsungUS @Samsung #galaxys23ultra #galaxys23series #galaxys23 #galaxys23plus #samsunggalaxys23ultra #samsunggalaxys23 #bestandworst - วิทยาศาสตร์และเทคโนโลยี
Applied it 7 months ago, cured for 60 minutes (yes 60 minutes) and not a single piece has gotten loose... it's still ON there, no spiderwebbing or whatever.
Of course some light scratches from using the phone but yeah it's on the protector so it's doing its job... awesome for the price!!
Thank you for sharing your experience after some time of use, this is very helpful information for everyone.
Loved the video! Thanks for putting in the time to make it!
Thank you! Very good directions!
Mowei one of cleanest screen protectors. It looks like it doesnt exists on phone. No leaks in charging ports or microphone because they provide tapes to cover it amd looks perfectly protected. Only problem wat can be with this product is some cases won't be compatible with scr. protector they too close each others and posibility for poping up screen. Im using Ringke Fusion case and i had to trimm little bit corners on case and now work flawlessly
Great content. I've had that screen protector for my note20 ultra, and it would always lift when using supcase unicorn beetle pro and poetic spartan and otterbox defender pro.
The adhesive glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ?
Would appreciate the help 🙏🏼
I got the IMBZBK kit, which is very similar. Both made in China. I'd go so far as to think some of the pieces may be made in the same factory. My installation went fine, 100%. There are some differences though:
1) They did not include the sticker for the bottom ports. I think this is the main deficiency, compared to your kit. I used some cellophane tape, but your kit's ready-made stickers would have been better.
2) The glue bottles were a little different (no extra tab to break), but it worked fine.
3) The IMBZBK kit does not instruct to make two bubbles. I would instruct people NOT to be obsessive about getting every little drip out of the bottle. I see you got a lot of excess around the edges, and some people using the IMBZBK did did as well. There is no reason to manipulate the bubbles, the weight of the protector will even it out.
4) Also be very careful when putting the little weight down, I think this may be causing more glue to leak out that necessary. Put it down **veeeeeeeery** gently. In your video, you kinda plopped it down. Frankly, if I see the liquid getting coverage everywhere, I might just skip this step? Not sure.
5) The IMBZBK does note have a cut-out for the front-facing camera. I don't know if this is good or bad. It's functioning fine, as far as I can tell.
6) DO not remove the phone from the holder until you've cured it several times with the light. I have no idea why you removed it after only one cure and continued... you're causing even more liquid to seep out. You can keep the phone in the plastic caddy thing as long as you need to, I let the light cover the entire phone several times before removing.
Yeah, man... as I watch, it seems like you have SO much excessive glue. It got worse when you nudged the screen... I'd try to get as even a surface as possible, and remove the wedge thing as slowly as possible, so as not to require that much movement during application.
One other difference that might matter: the IMBZBK's plastic caddy/holder thing has an integrated bubble level, which allows you to make sure you're doing the application on the most level purpose possible. If I had to guess, a) uneven surface and b) being too fast/careless with weight is what's causing all these leaks. I'd be freaking out! BTW I am not affiliated with either company, I think both kits can get the same job done, I'm just trying to give hints for people going forward.
The IMBZBK protector is not quite available around here, do you think this is pretty much the same good?
@@filler2036 I have no idea since I've only used one... :-) But they seem very very similar, I'm sure it's fine.
I'm still using my Samsung Galaxy 9. When I do decide to update to another Samsung galaxy. I'll buy the protector from your link. I'll add that my Samsung 9 has liquid glass protector along with a case for it. Over the years I dropped it many times not one break not one scratch well worth the extra money guys
Thank you for review and instraction. Very helpful.
Great job explaining the install process! Mine installed perfectly 1st try, although a little low but that's my fault -_-
NOTE: My instructions say 45 seconds cure with the weight and then 5 MINUTES without weight before removing it from the case. Then 45 minutes per second. It also suggested that you should stir the glue circles to remove any little bubbles. I didn't see any so i skipped it, but as I had bubbles on the last time I tried it may be a good idea. I like this companies product but they send you only TWO glue tubes and 4 screens. I had to get an entire new kit because my first one only had 1 glue tube left after I accidentally touched the phone and all the glue fell off before the screen went on. The second glue worked but then less than a year later it broke and both the protector and the screen broke even though it was in a heavy duty case. Because I had no remaining glue I had to purchase a new kit and that one only had one glue tube, the other was bone dry. Because I had bubbles I emailed the company per their instructions and they sent me out a completely new kit. I just put the first one on and so far successful. I wish there was a way to just get the glue because at this point I have so many screen protectors but only one glue. It seems silly that I have 3 curing lights, 3 cases and 3 metal bases when all I really needed was one tiny glue stick! I did have to redo my fingerprints but not a big deal. I really like the companies products, it just takes a bit of practice to get it right. YOur video and the one supplied on the Amazon listing were instrumental in my sucess, so Thank YOU!
GREAT screen protector did it perfectly on my first try thanks to your informative video keep up the great work 👍👌
Great video thanks for sharing
I've bought the privacy one of this, yet to install it, hopefully works fine and my case still fits properly (I've got the Ringke Onyx case)
One of my goto cases 😊
And ?
Hello, did the screen protector worked well with the case or did it peel off?
Nice video. But I don't trust glass with camera cutout as it tends to collect dust and also glass with black strip on edges as it covers some of the edge screen.
this looks fine but other uv screen protector videoes suggest u tape off the top speaker u ant showing that are u sure glue wont get into the top speaker?
Not either volume and on/off buttons
You put up tape on the bottom of the screen to protect against the glue, but what about the speaker cut out on the top? There is no way to protect that part unless you're relying on the foam.
thank you so much for this guide
Does it cover any scratches from the phone screen? I have a few and I want to hide it. I currently have a thinner one and it doesnt feel like it has a lot of protection.
it will .. I have some minor scratches on mine and the glue makes it looks brand new . I had 4 of these screens so far on my samsung s22 ultra and never going back to any other screen protector .
How remowe this glass?
Is the mowei clear tempered glass the same as the gatatol clear tempered glass ? Got 2 packs of moweis but got bubbles on all of them lol.... Should i try the gatatol one ?
it is your environment, its nothing to do with the brand u can try any brand if your house have floating dust.. well u know
@@teste-yh5df well if air bubbles are dust, sure :p
Excellent tutorial. I used slightly less glue but I feel it was the perfect amount as I had zero mess. Guess I got lucky lol
Do these come off easily with no damage to phone screen? Does it work well with cases. I bought one but am nervous to install.
I’ve never had my phone get damaged when taking the screen protectors off and it depends on what case you’re using the only way to really know is to try it with the case you want to use. It’s not really that hard to install. If you follow my video you should be fine. I didn’t have any issues installing mine.
I have installed Tempered Glass Screen Protector and i have Spigen MagSafe transparent case. Screen protector started peeling of in the bottom left corner. Don't know if that is from Case or i didn't installed it correctly. I had it under UV light 8 minutes. Anyone else having same case with this protector?
I heard that it will be hard to remove the screen protector in the future. Is this true?
I would like to use this protector on my new S23U but actually scared due to several cases saying so.
cut a retangler peice off of a plastic cup and carefully pry it up with that. thats works the best
not true, get a hard plastic to lift it up along the edges and it pops up easily
Interesting install concept. Seems more of a hassle than anything. And the scratch test results are not great for protection. Cool video though.
I have used uv glass protectors, its same as glass protector, the uv is only so the edges glue properly
How's the camera quality since it's covering it?
You can expect some light blurry sometimes but just cleaning it its ok
You've not covered the ear speaker and the volume + on/off buttons. We don't need to?
if not overflows then its not needed
I've always wanted to install one of these but I have installed more than enough screen protectors to know how difficult it can be to not get dust between the screen and the protector no matter how careful you are, and given how long and involved the process of installing one of these can be, there's no way I can rest assured I am not gonna get at least one spec of dust underneath it and I just cannot handle it. I really can't live with having the smallest spec of dust under the protector.
I feel you brother, i really feel you... it's kinda impossible... some peoples suggest to do it in the bathroom after turning on hot shower for a while, since warmest place tend to make dust less floaty but i dont know
the tip of installing in bathroom is the best, I also installed mine on s8 edge and got it perfectly, most houses have dust in the environment so you have to go to cleaniest place..
@@ayra7136 that really works bro
@@teste-yh5df You know what worked flawlessly for me time and time again ? Not the bathroom tip. Opening windows in the house in a way that there's an airflow. I know it sounds not very logical but I have found that stagnant air made the dust bits always fall on my screen which makes perfect sense, as the screens are static, but the chances of dust falling on my screen have always been SEVERELY mitigated by opening windows. Seriously. Try it.
@@DavidWilson-fr1et ty
Better than Dome?
Can you please test the ESR s23 ultra tempered glass.
Hmmm I see a clear circle on the screenshot of that protector which leads me to believe it’s just like the few I tested in my best and worst video. I’d stay away from it but I’ll see if I can get one for testing 👍🏼
@HighTechCheck thank you I will be grateful, I got this bundle with the camera lens protector dual pack.
Not good with cases, just mess up the corners
No need for liquid adhesive on a flat display. Your risking messing up the speakers, buttons, etc.. not fo me
It's not flat
3:17
this glass is not clear..why not?
It is clear but it’s privacy glass.
Hello,i ruined my earpiece speaker because of this brand's glue it goes everywhere in every corber of the phone and is hard to remove.
Salut,vroiam sa comand si eu acest screen protector!Sa inteleg ca nu este bun,asa este?Multumesc,imi pare rau pentru ce ai patit
Why you didnt cover or wipe before it getting messy
You didn't set the sponge over the speaker like he did so it didn't get to absorb the liquid so it poured into the speaker
Too risky. Those adhesives might flow inside the charging port.
there are stickers provided so you can avoid that, even without stickers you could just buy some painter's tape and protect it with that.
Yeah why he didn't include showing using the stickers. He did it show on older versions
@LJays 1:17 he literally puts the sticker over the charging port, speaker and s pen slot..
We're you even watching the video?
@@decathec oh I see, I might be referring to the other similar video. But then maybe I missed it too. Thanks for pointing out.
I took 3 days off from work to install mine
How did it come out for you?
@@HighTechCheck good so far, but had to try a second time
Dont use them with spigen cases
Which Spigen case did you test with?
Anyone else have issued removing the glue
i bought this shit but the light was defective.
I wouldn't use one again, cheap film protectors are best.
For scratch prevention only, glass is better for impacts.
@@HighTechCheck true
John, good luck spending 1200$ to replace screen :)