U sawed me, i unscrew all 4 screws because i thought i can swap grip and ewrything fall apart and i couldnt fit it all together again, after like 20 mins i give up and started search on yt some tutorials, finaly i found you and after like another 20 mins i had working replica, thanks so much 😅
my r604 got double feed problem after 1 month of use, how to fix this thanks! btw, 2 o ring already broke on me , valve and spring have to change for gass efficiency, now i get around 64 shot before have to refill the gas
they have really nice stock internals. My only recommendation out of the box is to put a nice barrel in, then down the line at some point swap out the hammer set for guarder (which is what the original set is a copy of in the first place haha)
hey man, loved the video, just wanted to fins out if its possible to mount a red dot sight to the r603? I would get the r604 if not but id prefer to save a bit of money as its my first pistol build
Hey friendo! You can indeed, but you have to get the C2 slide version (has the removable mos plate) Army make it as a full pistol, but you can actually just get the c2 slide and outer barrel to drop onto the r603 as is.
What would u recommend as a nozzle upgrade? I tend to have a few fliers at the start of a mag. I’ve installed a tight bore and improved hop but it hasn’t fixed it
I recommend the AIP nozzles for all capa builds my dude. If you have gels/bb's flying out of the mag, it will be them squirting out as nozzle arm scrapes backwards over them in cycle and they bounce back up. Combo of too loose lips and or scratchy nozzle arm. If gels are getting any damage entering the chamber, hopup will have very little effect as the cuts/scratches on gel will be fucking its flight path up.
@@johnescobar1520 Thanks bro. I ended up not buying it since the store that I could order it from is way too far from where I live and there's no spare parts for repairs I can buy or upgrades like TM spec parts.
I have notice that the slide it's a bit forward when it's back on battery, like a milimiter maybe, that happend yo My hi capa too, that happen because the wear of the outer barrel back, the part that hits with the frame. I repair that issue gluing a small piece of rubber on that part of the outer barrel
Is yours airsoft or gel blaster?? With a lot of our gel blaster conversions we have a different type of nozzle and it needs to go further forward a couple mm to seal in our gel gasket better :)
Sir im fan from the Philippines...i have a army armament hi capa to the R613 MODEL STACATTO XL.. CAN YOU give advise or tips sir on what part to upgrade or reinforce... Im a newbie sir.... thanks
Hey mate, thank you for the support! Best bits to upgrade for longevity will be the hammer and sear. Maybe up the hammer spring a bit but thats really it. I like the AIP nozzles personally as well for higher power.
I just got one of these.the only thing I thought was a bit odd is the iron sights.it looks like the rear is tall and the front is normal sized?am I seeing something no one else does?
1000000% correct it annoys the crap out of me haha. I can't find the raised front sights by themselves either only with the actual staccato frame and slide kit :(
@@Danny-G that blows.I was thinking that I could find a front that would work and have close to suppressor height?at least I am not imagining it.lol.I have one of the SAI DS blasters and it broke the corner off the valve knocker.I might have to send it to you if you work on those?
you think it's just the odd appearance of the sights, or does it aim low*shoot high in reality? Had this issue with ASG CZ P09, shooting waaay over high the sights and was unsuable.
My 604 started to leak air, ordered a new clip, still loses all the gas after 2 shots. I haven’t had it but two months, any suggestion on how to fix it?
i found fix for that! my r604 did the same.. u have to change the o ring inside the nozzles! its to tight, lubricate it with silicone oil or other organic oil btw u can quick fix by using sand paper to trimmed down stock o ring size in the nozzle.. just remember to lubricate it from time to time.
Safety selector on the right side needs to be pressed down in order to shoot the pistol or else It’ll put the gun on safe and can’t squeeze the trigger. Any advice on this ?
hey bud it sounds like the thumb safety bar may be too tight in the tail safety, so when you grip the gun and push the tail safety in the friction on the thumb safety bar pushes it upwards. I've seen that a couple time :)
Yes sir. I think army have hit the quality/price point perfectly in terms of they basically just copy guarder shapes for parts, and use alloys that are almost on par with stock tm.
Hey bro love the content recent sub from myself! Looking to get myself a gbb pistol and AA is looking really good. I hear really good things about WE as well and was considering the WE 4.3 Orginal Hi Capa. Any thoughts between this AA and the WE 4.3? Thought I'd ask someone who actually knows his shit. Thanks brother!
Hey mate! My recommendation is it depends haha. If you want a good out of the box pistol and don't plan to mod at all, go the wetech. If you want an ok out of the box pistol that is fully tm spec and you can put lots of love and time into, go the army.
@@Danny-G Thanks brother I thought that may have been the case haha I just haven't decided what path I want to go down yet! One more question I also watched your video on the GE 4.3 3301, between the AA and the GE for quality and customisation which do you rate better? Thanks again brother!
@@SaltiestFishy oh the GE is not even comparable to the AA. I myself would go the AA over the WE but I would also put about 20/30 hours worth of tuning and a couple grand worth of parts into it haha
@@Danny-G hey brother managed to get lucky and snag up an R603! Already got a 7.1 aluminium inner barrel and guarder valve knocker for it ready to go in. Question about the sanding to smooth out the surfaces, do you sand wet or dry when smoothing out your blasters? Also is it worth sanding the surfaces if I'm just gonna be using it at home and mucking around with mods? Thanks mate
Bro if i send ya a couple of pistols can you make em the best they can be in every way especially fps improvements? Of course ill pay for the parts and ya time and effort but if not all good bro just thought id ask cause ya know ya shit and i know jack shit
Hey bud of course thats my thing!!! If you jump on the website and go to the contact page and send through a email request i get a notification straight away!
@@Danny-G command elite said tgey had to fk with there obes as the fps was low who did you get yours from and i got the combat mqster it had issues it wouldnt evwry shot but when it did it was doin 330 i got it back its now lucky to do bloody 260
@@brianrapley567 theyre still all shit conversions man, it doesn't matter what brand were talking, none of them understand the intricacies of rechambering the whole device properly for bigger ammo. The guns themselves are brilliant, you just need to fine tune them. I like to put it in percentages, out of the box theyre all about a 50/60 % conversion, you want to get it to 100%
U sawed me, i unscrew all 4 screws because i thought i can swap grip and ewrything fall apart and i couldnt fit it all together again, after like 20 mins i give up and started search on yt some tutorials, finaly i found you and after like another 20 mins i had working replica, thanks so much 😅
Thanks for your video, without you, my paintjob was a nightmare ^^
my r604 got double feed problem after 1 month of use, how to fix this thanks!
btw, 2 o ring already broke on me , valve and spring have to change for gass efficiency, now i get around 64 shot before have to refill the gas
Nice video mang.
My brain still can't stop reading "Army Armament" and thinking it sounds weird.
God bless you. I solved the problem with your help !!
being the idiot i am took apart mine without knowing what i was doing this video was a god send thank you
Looks mint could you please tell me who sells them cheers
Great videos mate. Keep up the good work. What upgrades, re inner barrel and metal barrel etc would u recommend?
they have really nice stock internals. My only recommendation out of the box is to put a nice barrel in, then down the line at some point swap out the hammer set for guarder (which is what the original set is a copy of in the first place haha)
@@Danny-G thanks Danny
420 baby 😉 they don't know what they missing bro
hey man, loved the video, just wanted to fins out if its possible to mount a red dot sight to the r603? I would get the r604 if not but id prefer to save a bit of money as its my first pistol build
Hey friendo! You can indeed, but you have to get the C2 slide version (has the removable mos plate)
Army make it as a full pistol, but you can actually just get the c2 slide and outer barrel to drop onto the r603 as is.
What would u recommend as a nozzle upgrade? I tend to have a few fliers at the start of a mag. I’ve installed a tight bore and improved hop but it hasn’t fixed it
I recommend the AIP nozzles for all capa builds my dude.
If you have gels/bb's flying out of the mag, it will be them squirting out as nozzle arm scrapes backwards over them in cycle and they bounce back up. Combo of too loose lips and or scratchy nozzle arm.
If gels are getting any damage entering the chamber, hopup will have very little effect as the cuts/scratches on gel will be fucking its flight path up.
Hey dude do you know if WE Tech mags fit in this specific model? Thanks in advance
Hey bro I can relate on your question...yes it fits and perform but it won't drop free when you press the mag release button ..you need to pull it out
@@johnescobar1520 Thanks bro. I ended up not buying it since the store that I could order it from is way too far from where I live and there's no spare parts for repairs I can buy or upgrades like TM spec parts.
I have notice that the slide it's a bit forward when it's back on battery, like a milimiter maybe, that happend yo My hi capa too, that happen because the wear of the outer barrel back, the part that hits with the frame. I repair that issue gluing a small piece of rubber on that part of the outer barrel
Is yours airsoft or gel blaster?? With a lot of our gel blaster conversions we have a different type of nozzle and it needs to go further forward a couple mm to seal in our gel gasket better :)
@@Danny-G yes, it's an airsoft gun
@@Frambhueee you have a pretty keen eye not a lot of people would pick up on that :)
@@Danny-G thanks!, I have that weird issue on mine, maybe it's not an issue for you, but I thought it was too xd
Sir im fan from the Philippines...i have a army armament hi capa to the R613 MODEL STACATTO XL.. CAN YOU give advise or tips sir on what part to upgrade or reinforce... Im a newbie sir.... thanks
Hey mate, thank you for the support!
Best bits to upgrade for longevity will be the hammer and sear. Maybe up the hammer spring a bit but thats really it. I like the AIP nozzles personally as well for higher power.
Which parts should be upgraded if you were to upgrade this gun?
main bits to upgrade are the barrel and just give it a basic tune buddy :)
@@Danny-G Sounds good!
I just got one of these.the only thing I thought was a bit odd is the iron sights.it looks like the rear is tall and the front is normal sized?am I seeing something no one else does?
1000000% correct it annoys the crap out of me haha. I can't find the raised front sights by themselves either only with the actual staccato frame and slide kit :(
@@Danny-G that blows.I was thinking that I could find a front that would work and have close to suppressor height?at least I am not imagining it.lol.I have one of the SAI DS blasters and it broke the corner off the valve knocker.I might have to send it to you if you work on those?
@@zachfpv4493 i haven't done one of the sai's yet my dude! Valve knocker is easy peasy though a normal guarder one should work sweet :)
@@Danny-G thanks mate I will give that a try 👍
you think it's just the odd appearance of the sights, or does it aim low*shoot high in reality? Had this issue with ASG CZ P09, shooting waaay over high the sights and was unsuable.
hey, I'm stuck between this and the golden eagle 4.3. Which one do you prefer? I know their pretty similar lol. thanks
world of difference quality wise. The army is vastly superior in terms of internals parts quality. Golden eagle is poopoo
Quality editing. Great content.
My 604 started to leak air, ordered a new clip, still loses all the gas after 2 shots. I haven’t had it but two months, any suggestion on how to fix it?
aw man!
that sounds like it may be a rocket valve issue (little guy inside nozzle)
i found fix for that! my r604 did the same..
u have to change the o ring inside the nozzles! its to tight, lubricate it with silicone oil or other organic oil
btw u can quick fix by using sand paper to trimmed down stock o ring size in the nozzle.. just remember to lubricate it from time to time.
What grip modules fit the r603? Would the emg staccato p licensed grips be compatible?
yes the licensed emg ones fit, any tm spec grip is compatible.
Safety selector on the right side needs to be pressed down in order to shoot the pistol or else It’ll put the gun on safe and can’t squeeze the trigger. Any advice on this ?
hey bud it sounds like the thumb safety bar may be too tight in the tail safety, so when you grip the gun and push the tail safety in the friction on the thumb safety bar pushes it upwards. I've seen that a couple time :)
Did you switch out the orange optic for the green optic? Or was that factory?
i did indeedily friendo :)
@@Danny-G 😯 how did you do that? Where did you get the sight. I’m trying to make it look like the staccato p host and you kinda got it to a T
Top vid mate, keep up the great work 👍
thank you man
i want to put a RMR on top of it, does anyone know where to buy the mount?
Are the Army Armament slides lighter than other stock metal slides? AW, WE, KJW, etc
Yes sir. I think army have hit the quality/price point perfectly in terms of they basically just copy guarder shapes for parts, and use alloys that are almost on par with stock tm.
@@Danny-G This is great to hear! Many thanks
@@Danny-Gdoes this mean the Guarder blowback housing works on the R603???
@@jimmybracing you have to take some material off but yes :)
@@Danny-G what do you mean by material?? I really hope I don’t have to shave anything off the gun
Another great video from Danny G thanks mate 👍🏻🔫🔫🔫
This can handle co2 right? Along with 170% recoil spring?
I would definitely not be too keen on running co2 through them unless you get a nice cnc slide
I think the staccato has the best look, but Im worried about the finish of the paint of this army armament
The quality is all on par with stock tm in my opinion and I totally agree the staccato is the sexiest
Hey bro love the content recent sub from myself! Looking to get myself a gbb pistol and AA is looking really good. I hear really good things about WE as well and was considering the WE 4.3 Orginal Hi Capa. Any thoughts between this AA and the WE 4.3? Thought I'd ask someone who actually knows his shit. Thanks brother!
Hey mate! My recommendation is it depends haha.
If you want a good out of the box pistol and don't plan to mod at all, go the wetech.
If you want an ok out of the box pistol that is fully tm spec and you can put lots of love and time into, go the army.
@@Danny-G Thanks brother I thought that may have been the case haha I just haven't decided what path I want to go down yet! One more question I also watched your video on the GE 4.3 3301, between the AA and the GE for quality and customisation which do you rate better? Thanks again brother!
@@SaltiestFishy oh the GE is not even comparable to the AA. I myself would go the AA over the WE but I would also put about 20/30 hours worth of tuning and a couple grand worth of parts into it haha
@@Danny-G haha fair enough mang. No worries that definitely helps. Keep the vids coming brother!
@@Danny-G hey brother managed to get lucky and snag up an R603! Already got a 7.1 aluminium inner barrel and guarder valve knocker for it ready to go in. Question about the sanding to smooth out the surfaces, do you sand wet or dry when smoothing out your blasters? Also is it worth sanding the surfaces if I'm just gonna be using it at home and mucking around with mods? Thanks mate
Gel Blaster? is that what australians call airsoft??
Basically yeah. Here in aus 6mm solid ammo is illegal, so all our devices have to be chambered for 7-8mm orbeez, those little garden gels -_-
I like my r604..army armament..
Bro if i send ya a couple of pistols can you make em the best they can be in every way especially fps improvements? Of course ill pay for the parts and ya time and effort but if not all good bro just thought id ask cause ya know ya shit and i know jack shit
Hey bud of course thats my thing!!! If you jump on the website and go to the contact page and send through a email request i get a notification straight away!
@@Danny-G ok cheers bro i have quite a few to get done so you will earn some good coin bro
@@brianrapley567 get yourself one of these new army capas to play with man!!!
@@Danny-G command elite said tgey had to fk with there obes as the fps was low who did you get yours from and i got the combat mqster it had issues it wouldnt evwry shot but when it did it was doin 330 i got it back its now lucky to do bloody 260
@@brianrapley567 theyre still all shit conversions man, it doesn't matter what brand were talking, none of them understand the intricacies of rechambering the whole device properly for bigger ammo. The guns themselves are brilliant, you just need to fine tune them. I like to put it in percentages, out of the box theyre all about a 50/60 % conversion, you want to get it to 100%