Hellow, i have problem. When I did the assembly of the connecting rod, piston and bushig, it all works well. But when I make these elements with a rectangular pattern, everything blocks me :/ How to solve it?
Since our cylinder line is 85 mm and our stroke is 49 mm times 2, i used v= pi*radius squared times height. 3.14 * (4.3 cm)^2 * 9.8 cm * 12 cylinders equals 6,831 cubic centimeters or 6.8 liter engine displacement. Please correct me if i'm wrong. Thank you.
Why the video number 10 is blocked in my country (Italy)? It's important to watch it to keep going with the project? Thanks for sharing your knowledge.
Hey K. Ammar, just wanted to say thank you for these great tutorials, I've learned a lot so far about inventor while doing this and there is so much more to learn.
I definitely will, I've been doing this engine as a project for my drafting class so I'll definitely show my teachers and classmates where I got the work from.
Ammar. What do you suggest for adding the remaining pistons, sleeves and connecting rods? It does not appear we should pattern the Component Pattern 1:1 in this instance.
Hi Ammar! I have a problem. When i make the constrain between the connecting rods and the crankshaft one of the rods is fixed, it doesn't work. did i miss something from the connection?
Hello khelifaoui,drawing the block cylinders I found the hole of diameter 3 mm.x 595. In principle I am not clear machining, since I have not seen drilling from the outside of the body. On the other hand to be able to communicate that hole with the From the inside of the block, I do not see any side holes that one. Thank you very so much for your time and regards.
Great work again. I hope the tutorials go after EP 21. What Agim Shehu even asked ,when did you add those 4 things on the lower side of the cylinder block? You can see them on time 0,42. Again thanx fot the great work.
Really great and inspiring work. I'm replicating it with AutoCAD, which is a bit harder. You really give these software purpose. Hope your exam went well.
youtube don't let me add your country in the list , So , I was find a solution to you , you can change your location in your youtube parameter to acces to the video , you can choose , USA , France , Italie ,brazil... you can use your credit card to pay . see this tutorial to change you location , it take 1 day to change location , Regard :)
Ammar, i am having a major problem and unable to move forward from this tutorial. Please help me. Been trying for 3 hours straight but still cannot solve the problem. My crankshaft is jutting out from the end. Hence my con.rods arrangement are protruding out from the cyl block. I have checked and redone my crankshaft and c/shaft is ok. I have checked the total length of the cylinder block and it says its 604mm (which is what u said). How. Someone please help me. I dont want my effort to go to waste.
hola. estoy buscando a persona para asociarme en la contruccion de un Nuevo motor de combustion que es unico en el Mercado, if you are interesting to help me , let me know ,
Hello! I have a problem, when to position the connecting rods, one it does not move! What do I do? helps. By the way, you're a crack! hehe. And not turn me crankshaft: c
Thats no opinion, thats engeneering basics ;-) The schematic is ok, the details not. trust me I`m work her : www.engines.man.eu/global/de/index.html?_ga=1.157800761.2076232811.1453703143 but i still look forward to your next tutorial.
Andy Elefant that's cool , I m looking for working there , can you help me for this ?? ;) then for tutorial , I ll and new series at the end of this month
why the the 4episod it's bloked in my country. maybe I'm paying?, I'm sorry but I have no money, even if I wanted to continue. you could at least help me send me a drawing with all the measurements, then I build it myself. if you do things without money for sure you would have many more followers in these years.
@@AmmarKhelifaoui I can't pay, you could send me at least one model, a photo with the measurements, please, otherwise my project will be halfway done. I am a student, I have no money.
Hellow, i have problem.
When I did the assembly of the connecting rod, piston and bushig, it all works well. But when I make these elements with a rectangular pattern, everything blocks me :/
How to solve it?
Since our cylinder line is 85 mm and our stroke is 49 mm times 2, i used v= pi*radius squared times height. 3.14 * (4.3 cm)^2 * 9.8 cm * 12 cylinders equals 6,831 cubic centimeters or 6.8 liter engine displacement. Please correct me if i'm wrong. Thank you.
Why the video number 10 is blocked in my country (Italy)? It's important to watch it to keep going with the project?
Thanks for sharing your knowledge.
Hi there bro , I ll fix that' for you
Hey K. Ammar, just wanted to say thank you for these great tutorials, I've learned a lot so far about inventor while doing this and there is so much more to learn.
Braden Williams that's good things . please share this to grow my channel 😊
I definitely will, I've been doing this engine as a project for my drafting class so I'll definitely show my teachers and classmates where I got the work from.
Thanksss. Cheers
yes I have a question: where are those holes from the outside that communicate with the 5 mm in diameter thanks.
Ammar. What do you suggest for adding the remaining pistons, sleeves and connecting rods? It does not appear we should pattern the Component Pattern 1:1 in this instance.
+Greg Goward ok ok man , I ll add all , but i ll keep match time , if u said i ll do it
;)
+khelifaoui Ammar Awesome!
+khelifaoui Ammar Ammar. Nevermind, I was able to do it! Thank you!
Hi Ammar! I have a problem. When i make the constrain between the connecting rods and the crankshaft one of the rods is fixed, it doesn't work. did i miss something from the connection?
Hi Khelifaoui, i want appreciate you for the good work, please I need the Crank and Can tutorials, cant find them here....,
Hello khelifaoui,drawing the block cylinders I found the hole of diameter 3 mm.x 595. In principle I am not clear machining, since I have not seen drilling from the outside of the body. On the other hand to be able to communicate that hole with the From the inside of the block, I do not see any side holes that one.
Thank you very so much for your time and regards.
+Mario Fernandez thanks . Do you have a question for me ?
Where did those supports on the block come from? You haven't included them in previous videos. Could you please add them? Appreciate your work man.
+Benjamín Inostroza it s not important, i m teaching you methodes to improve your skills
when did you add those 4 things on the side of the cylinder block?
+agim shehu u wana say , exhaust system ?
+khelifaoui Ammar at 0:41 you can see that on the side of the cylinder block there are 2 things. where did those come from?
Amazing work! Bravo!
+29backwards thanks :)
Where is the crank? what´s the reason to do this tutorial with half parts!
Hi there bro, thanks for your comment , there are some episodes not for free, please find it on my website kammar9.com/store, enjoy it
Great work again.
I hope the tutorials go after EP 21.
What Agim Shehu even asked ,when did you add those 4 things on the lower side of the cylinder block?
You can see them on time 0,42.
Again thanx fot the great work.
+Will Pisters thats it , then it's not an imortant part , we can add it after
hello friend. I dont see that you put the pin between piston and conecting rod, why?
fankinSombrero yes i ll add it
How do you zoom in and out like that?
What car is this engine from?
Really great and inspiring work. I'm replicating it with AutoCAD, which is a bit harder. You really give these software purpose. Hope your exam went well.
+Igbomezie Michael thanks brother , I like to share ideas with peoples , that's make me happy
Nice :)
Soy de Costa Rica y no puedo ver ciertos videos porque estan bloqueados por favor desbloquearlos.
youtube don't let me add your country in the list , So , I was find a solution to you , you can change your location in your youtube parameter to acces to the video , you can choose , USA , France , Italie ,brazil... you can use your credit card to pay . see this tutorial to change you location , it take 1 day to change location , Regard :)
What tutorial? And
thanks for answering. :)
I am from usa and it does not let me see certain videos then it does not have to see that the country is not because youtube is from usa.
Cacho Chomboloco ok then . you can buy the tutorials from my channel . when you click on the 4th episode notice that s a price on the video 😊
Ammar, i am having a major problem and unable to move forward from this tutorial. Please help me. Been trying for 3 hours straight but still cannot solve the problem. My crankshaft is jutting out from the end. Hence my con.rods arrangement are protruding out from the cyl block. I have checked and redone my crankshaft and c/shaft is ok. I have checked the total length of the cylinder block and it says its 604mm (which is what u said). How. Someone please help me. I dont want my effort to go to waste.
omar i really need your help man. i cannot get past this. normally i can pull thru, but i cant with this
hola. estoy buscando a persona para asociarme en la contruccion de un Nuevo motor de combustion que es unico en el Mercado, if you are interesting to help me , let me know ,
Hello! I have a problem, when to position the connecting rods, one it does not move! What do I do? helps. By the way, you're a crack! hehe. And not turn me crankshaft: c
great skills, but bad konstrukion ;-)
+Andy Elefant thanks but I did not understand "konstrukion ;-)"
the engine would not work ;-)
Andy Elefant ah ok , that your opinion , ;)
Thats no opinion, thats engeneering basics ;-)
The schematic is ok, the details not. trust me I`m work her : www.engines.man.eu/global/de/index.html?_ga=1.157800761.2076232811.1453703143
but i still look forward to your next tutorial.
Andy Elefant that's cool , I m looking for working there , can you help me for this ?? ;) then for tutorial , I ll and new series at the end of this month
why the the 4episod it's bloked in my country. maybe I'm paying?, I'm sorry but I have no money, even if I wanted to continue. you could at least help me send me a drawing with all the measurements, then I build it myself. if you do things without money for sure you would have many more followers in these years.
Hi there bro , you can download it from my website kammar9.com/store enjoy it bro
@@AmmarKhelifaoui I can't pay, you could send me at least one model, a photo with the measurements, please, otherwise my project will be halfway done. I am a student, I have no money.