I managed to notice a few things: 1 side: trivial case 2 sides: opposites (RL) is a trivial case adjacents (RU), you'll never have CPLL. You can get away with just the RU U-perms 3 sides: RUL is really similar to RU, so pretty easy. But also you need different algs for PLL so I used an RUL J-perm RUD: Used RUD T-perm. Technically similar to RUL if you allow cube rotations but when solving cross on D, this is different. Some algs work at this point RUF: You need different blockbuildings to get F2L down. Don't start with cross, start with the FL edge. Most algs work at this point 4 sides: RULD: All edges are oriented so proceed as some modified version of ZZ RULF: F face is the only way to fix orientations, so solve B edges first 5 sides: No D: easy, just be cautious of algs to use NO B: do EO first, then proceed with RULD NO U: use S moves to get away with F2L, then use modified OLL and PLL algs: OLL, do corners first before edges Fat (anti)(back)Sune in place of (anti)(back)Sune To flip 2 adjacent edges (UF and UL): Fat sune y' Fat Backsune To flip 2 opposite edges (UL and UR): r U2 r' F R' F' R U' R U' r' y Fat Antibacksune PLL, use A perms and MU U perms Bonus content: It's possible to solve the entire cube using only U, E, and x You can use combination of U, E, and x to make y You can use combination of x and y to make z You can use combination of U and xyz to make UDLRFB
You should a cube the worst again. There's a lot you haven't really done with it. Some ideas I had: Imperfect magnet locations Varying spring strength Varying screw size Glue 2 random things together. Use stickers with different shades.
Could you do an experiment where you put in every magnetisation in a speedcube ever? That means: Corner Edge Magnets (48) The crazy 6 ring Maglev (from the moretry Tianma) (36) 20 Magnet Ball Core (40) Edge Feet, Corner Feet Magnets (48) (also from the Moretry Tianma) Center Edge Magnets from the Valk 3 (48) I would love to see how a cube with over 200 Magnets turns!
I did this for an April Fools day joke once, but I didn't actually make the cubes. I just wanted to get J-Perm Mad. Introducing the all new MoYu YJ Weilong GTS W RM v9 2024 v2. With 31 different versions. Each version was a different combination of the magnets(I hope I calculated the combinations right). I also made the names of them very weird and annoying, with it all being google translated to Chinese so that I could say "The Chinese has some mistakes so... Hope you can read english!"
He would need to start with the fully upgraded MoreTry Tianma, maybe the ShengShou YuFeng v1/v2, but it could be possible, especially considering the kinds of things Alex does to his cubes, he could probably do it.
great video concept, we all tried some restricted cubes but this is a nice complete overview. Also like how you added some cube theory for new cubers, like orientation. Keep it up!
Very cool! I also made some of these challenges, for example only R,U moves (this is your case of four layers blocked), only middle moves, only double moves (that one was really interesting, since you have to come up with algorithms of, say, the H-perm which only has double moves). It's a really fun challenge and no new puzzle is required. At the same time (and you have mentioned this with the Siamese cube) this is also beneficial for solving other puzzles. Having a T-Perm at your disposal which has only R2 moves makes it possible to apply this one also to cuboids. I will definitely try out the challenges from your video as well. 👍
Kind of a "reverse bandaging" type of technique in the beginning. But once you start bandaging before the scramble, it basically becomes a "bandaged cube" type of situation. still slightly interesting.
'im too lazy to do that" at 8:40, from a man who posted "i turned a 2x2 into a 3x3" and "making a 3x3 have 5 different solutions" which both required skill and patience.. alot of it
Hello z3cubing! I got a flagship tornado v3 m and the core rod got out. And everytime I try to put it in it gets super loose. And once I get the core rod inside and all the peice in. And when i move the cube the fast i can the core rod and the peuces fly away! Im so frustrated and confused if its broken or if this is normal. And even if i put the rod tight it still those the same thing. So please make a video about it please.
hey Z3cubing, maybe you should rephrase the thumbnail, you make good content but i never see it getting viral, maybe something like "how many sides can i NOT turn and solve a rubik's cube" HHMMMMMM??????
@@Canyonpettitt well uhmm.. does he have a job? Or anything other income besides youtube? Cuz if he doesn’t well he would well wanna go viral. What am i saying?
Jperm: Solves a 3x3 without turning the yellow side
Z3: imma do more than that-
They are different challenges. Jperm uses normal scramble but z3 doesnt scramble the side which is locked
☝
@@wasabilai9405 🤓
Totally not watching that 1x1x1 tutorial for all 6 sides.
@@wasabilai9405did he not do a normal scramble the first time?
“I’m too lazy” says the person who who did one turn per mile for solving a 6x6
And broke his hand while at it
he also broke his bone, went from US to Canada, and it was raining half the time
😮😢😂😂😂
Says the person who said "who who".
@@expunged2137 🦉 🦉
I managed to notice a few things:
1 side: trivial case
2 sides:
opposites (RL) is a trivial case
adjacents (RU), you'll never have CPLL. You can get away with just the RU U-perms
3 sides:
RUL is really similar to RU, so pretty easy. But also you need different algs for PLL so I used an RUL J-perm
RUD: Used RUD T-perm. Technically similar to RUL if you allow cube rotations but when solving cross on D, this is different. Some algs work at this point
RUF: You need different blockbuildings to get F2L down. Don't start with cross, start with the FL edge. Most algs work at this point
4 sides:
RULD: All edges are oriented so proceed as some modified version of ZZ
RULF: F face is the only way to fix orientations, so solve B edges first
5 sides:
No D: easy, just be cautious of algs to use
NO B: do EO first, then proceed with RULD
NO U: use S moves to get away with F2L, then use modified OLL and PLL algs:
OLL, do corners first before edges
Fat (anti)(back)Sune in place of (anti)(back)Sune
To flip 2 adjacent edges (UF and UL): Fat sune y' Fat Backsune
To flip 2 opposite edges (UL and UR): r U2 r' F R' F' R U' R U' r' y Fat Antibacksune
PLL, use A perms and MU U perms
Bonus content:
It's possible to solve the entire cube using only U, E, and x
You can use combination of U, E, and x to make y
You can use combination of x and y to make z
You can use combination of U and xyz to make UDLRFB
Sheesh
a few?!
Are you a rubix cube researcher?
Bandage mods are a delight. I highly recommend the DIY bandage cube kit from cubetwist for all your not-putting-tape on your cube needs.
You should a cube the worst again. There's a lot you haven't really done with it. Some ideas I had:
Imperfect magnet locations
Varying spring strength
Varying screw size
Glue 2 random things together.
Use stickers with different shades.
Could you do an experiment where you put in every magnetisation in a speedcube ever?
That means:
Corner Edge Magnets (48)
The crazy 6 ring Maglev (from the moretry Tianma) (36)
20 Magnet Ball Core (40)
Edge Feet, Corner Feet Magnets (48) (also from the Moretry Tianma)
Center Edge Magnets from the Valk 3 (48)
I would love to see how a cube with over 200 Magnets turns!
I did this for an April Fools day joke once, but I didn't actually make the cubes. I just wanted to get J-Perm Mad.
Introducing the all new MoYu YJ Weilong GTS W RM v9 2024 v2. With 31 different versions. Each version was a different combination of the magnets(I hope I calculated the combinations right). I also made the names of them very weird and annoying, with it all being google translated to Chinese so that I could say "The Chinese has some mistakes so... Hope you can read english!"
He would need to start with the fully upgraded MoreTry Tianma, maybe the ShengShou YuFeng v1/v2, but it could be possible, especially considering the kinds of things Alex does to his cubes, he could probably do it.
9.40 - That's basically a 2x2! Just with the edges visible
that's what a 3x3 is.
erm, ackchyually I'm wrong because most 2x2 speedcubes have a big corner
4:25 4:37 4:46
Ay! R2D2!
you can save the hassle of putting pairs into other slots when 3 sides are bandaged by doing variations of R2' F R F' R at different angles
yeah or just sledge the pair so that its eo changes without breaking
It's good that you know enough tricks to solve a cube with only 3 sides turntable because that I think would be the hardest one
junior is blind
junior cant se da cube caz hez blind
@@PBwithPARITY-juniorisblind02 no he cant hez blind
@@PBwithPARITY-juniorisblind02ok who let their cat on their keyboard for more than 2 seconds (seriously, stop speaking like a 3 year old.)
@PBwithPARITY-Juniorisblind WHO THE F*** EVEN IS JUNIOR ANYWAY AND I DONT WANT “hEz BlInD” like stop speaking like a f****** 3 year old
I like this video because of how he also tests what happens with different combinations of restrictions
solve a Rubik’s cube with your elbow
No.
Yes.
10:31 Easy alg here: R' F' U' F R
great video concept, we all tried some restricted cubes but this is a nice complete overview. Also like how you added some cube theory for new cubers, like orientation. Keep it up!
Have you tried solving a cube under red light? Try it, it’s hard
I did that once, but i had help from a friend. It was still fun though.
Very cool! I also made some of these challenges, for example only R,U moves (this is your case of four layers blocked), only middle moves, only double moves (that one was really interesting, since you have to come up with algorithms of, say, the H-perm which only has double moves). It's a really fun challenge and no new puzzle is required. At the same time (and you have mentioned this with the Siamese cube) this is also beneficial for solving other puzzles. Having a T-Perm at your disposal which has only R2 moves makes it possible to apply this one also to cuboids.
I will definitely try out the challenges from your video as well. 👍
Kind of a "reverse bandaging" type of technique in the beginning. But once you start bandaging before the scramble, it basically becomes a "bandaged cube" type of situation. still slightly interesting.
sounds like what i would do when im bored lol, ive always gotten down to 4 sides, but could never get to 3, you're a legend man
Your about to hit 800K btw
1:03 doesn't turn
1:35 keyhole
1:47 OLL
1:58 doesn't turn #2
8:34 noo z3 eocross man, you're doing it the better way
'im too lazy to do that" at 8:40, from a man who posted "i turned a 2x2 into a 3x3" and "making a 3x3 have 5 different solutions" which both required skill and patience.. alot of it
800K SUBSCRIBERS Z3
4:03 HELL NAH BRO SAID :I’ll so sexy move
13:33 why did you bandage a 1x1?
wow, such a nice video. You mananed to teach so much with a very simple video!
I have came to a conclusion after hours of trying I could not solve the all 6 side’s restricted.
He took bandaging to the next level
Can you make a 4x4x1
one of my favourite cubing challenge videos from one of my favourite cubing youtubers
There's actually a lot of RUL algs for Gd perm, they just suck a lot
A mirrored sexy move is called an ugly move
For 5-side and 4-side, use ZZ to reduce to RUL..
In the end, you created the unsolveable 1x1x1!
I am planning on making a full gold rubiks cube, I know you do cool things with cubes, any tips?
Can you make a 3 by 3 by gluing the wings of a 4 by 4?
Yes
The 6 sides restricted was too hard for me
3:39 I would've done F R U R' F'
2-gen is so fun and I use it for faster tps and zb recog
I would like seeing this as a WCA event.
I noticed the R2 D2 move pattern with two sides
can u make tutorial video for solving mastermorphix 4 by 4
1:14 turn the middle
The screw holds the middle and the layer together, otherwise he could just turn the middle and the bottom to basically turn the top
so close to 800k...
Bro found out how to turn into a gan robot lol
This was so cool to see because I have been doing these exact challenges over the last 5 weeks while I can't speedcube due to a broken hand!
HEY AND YOU ALSO said we all agree that orange is the worst side on a rubiks c7be.😂😂😂
Awesome!
The true bandage cube
Z3 next video: making a 3x3 into a 4x4
So do you know what happened to jperm does he just not post anymore
Can u make a 3x3 made of osmium?
The cube is crying man
13:36 Utterly impossible
1:02-1:12 can’t you do a wide u move for that? that’s usually what i do in my solutions
no because that rotates the white side
If you could move the middle layer, you could just turn the middle and the bottom to turn the top
badange cube 11:31
Wellits hard to solve the last one. Because how do you get all the black tape on one side😂
What about 7 illegal sides
You’d need a megaminx for that
@@Darth_Bdude you are forgetting the bishop in the 4th dimension
@@The2024Not-Channel i haven’t learned that part yet, I’m only 15
999999
Do that with megaminx
i feel RUBar vibes
Make word's largest magnetic cube
can you make a 3x3x0
R’ L’ F2 B2 R L
Are you gonna take off that tape?
Bandage cube at home:
Phil yu approves of the vid
Try this on a megaminx
1:04 u?
When you said 3 sides are restricted, didn’t you mean that was like solving the first cube of fused cubes?
What's the difference between fused cubes and siamese cubes again?
@@Nicoder6884I don’t know.
me when see z3 dont do doubleflicks: 💀
Why do i always get these cubing ads before i can watch cubing videos😢
When
Hello z3cubing! I got a flagship tornado v3 m and the core rod got out. And everytime I try to put it in it gets super loose. And once I get the core rod inside and all the peice in. And when i move the cube the fast i can the core rod and the peuces fly away! Im so frustrated and confused if its broken or if this is normal. And even if i put the rod tight it still those the same thing. So please make a video about it please.
The new j perm …..
request: 6 illegal turns
oh wait,
that's the impossibly difficult 1x1x1
Nah
Wow
ha beca cudont sove it with six sides restricted
easiest one is 6 illegal (you cant scramble it)
When you think about it, there’s always a way to solve it.
😂
I'm have megaminx
What
Call your super sqare 1 star, a stupid sqare 1 star. 😂😂😂😂😂😂😂😂😂😂😂
1:24 you turned it
He did D wide prime which is just a U then a Z rotation
9:39 can someone reply to this comment and explain the joke?
because he said "anyway" but he can't turn the cube ANY way, its restricted what ways he can turn it
@@pi3.14etc thx
He also did the N perm
Sexy move🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨
Wu
Wow me big fan
2nd
Fun
Claim your before 30 minutes seat here.
Like beggar
I'm claiming my seat with a dislike on your comment
I totally made it in time
@@TannerJ07 same
J
yo
hey Z3cubing, maybe you should rephrase the thumbnail, you make good content but i never see it getting viral, maybe something like "how many sides can i NOT turn and solve a rubik's cube" HHMMMMMM??????
I don’t think he does TH-cam to go viral
I think he does TH-cam for fun and as side income
@@Canyonpettitt well uhmm.. does he have a job? Or anything other income besides youtube? Cuz if he doesn’t well he would well wanna go viral. What am i saying?
@@diegojost3351 pretty sure he’s still in college
I’ll have to ask him at an upcoming competition
@@Canyonpettitt oh, pffft, doooi college
@@diegojost3351 ?
👇🏻3hour gang
junior is blind
70th! I am such a villain haha
Aeeeee
I'm the 100th comment
Hi
2h ago😊
hello