How to replace a CV Axle on a 2002 Subaru Impreza
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- A quick overview on how I replaced a front right cv axle in my 2002 Subaru Impreza in a driveway.
Don't mess up your alignment! Do it this way! Or don't- see if I care.
If you have trouble putting the knuckle back onto the ball joint, the jack can be used to lightly lift up on the hub- and a push down on the LCA with a prybar or foot.
There are other ways to do this job! Occasionally you don't have to disconnect the hub/knuckle at all if you turn wheel one way or the other, but I find this to be less of a hassle somehow.
The ABS sensor was zip tied up due to the incorrect axle being in the car, it was bolted back into place when the new (correct) axle was installed.
This covers 20 years of subarus i'm sure, imprezas, legacys, foresters, ect.
#Subaru #howto #Subaruimpreza #subaruforester #subarulegacy #2002 #axle #car
Bingo bongo. This video is underrated :) thanks for the tips!
I was having a hell of a time getting the camber bolts to break loose. They’re not even rusted, just monster tight. This video helped a ton. Thank you
im not surprised, their torque spec is 130ft/lbs
What axle did you get to replace it? Doesn't look oem. Any good?
I’m currently trying to remove that axle on my 02, holy shit it is so stuck I’ve been trying for hours it is so fucjing stuck I wanna kms
I wound up spraying a ton of PB Blaster on them, heating them up and then used a long breaker bar. Just dont lift the car off the jack stands
No joke I’m in the exact same situation also on an 02