How to Make an Axial Centrifugal Compressor in SolidWorks |JOKO ENGINEERING|
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- FREE SolidWorks Course and Certification!
alison.com/course/solidworks-...
Access all Tutorials Here:
• Joko Engineering Tutor...
Questions?
jokoengineering
jokoengineeringhelp@gmail.com
![[LIVE] : ONE ลุมพินี 65 วันนี้!! คู่เอก "จ้าวเสือใหญ่ vs ผึ้งหลวง"](http://i.ytimg.com/vi/TDpOh5eEJKw/mqdefault.jpg)
Thank you for the very methodical tutorial. Easy to follow, since you were explaining every step/command and why you did it a certain way. I just wasn't sure whether or not it could be molded. thanks.
You're like the Bob Ross of SolidWorks. Thank's for keeping it so peaceful. :-)
Thank you for fully defining your sketches/models.
Thanks a lot ! This tutorial helps me to learn to use 3D sketch with loft. Jack Lam from Hong Kong
You are like the Bob Ross of solidworks tutorials. The more I watched the video I couldn't help but think that. I was waiting for you to add some happy bushes. In your case it would be like, " we're going to put some happy little bushings right over there. Don't tell anyone though, they can be our secret bushings. Happy little bushings." >.
This video was presented beautifully. Thanks
+Allen Alahari
NIce to hear, thank you for the comment
that was nice.I have learn many things .thank you .
Thanks for tutorials
In parameters there is an equal spacing checkbox. 360 degree and pcs. And that is it.
Good job...
Bravo 👍👋
8:20 or simply check "equal spacing"
Very good :)
Nice video, Thank you
th-cam.com/video/_81dOSeNbuY/w-d-xo.html impeller design
very cool!!!
+zuchtmaus
Thanks a lot!
Is there any way to find the compression ratio from this?
I was hoping the important cross section of the blade would be covered.
i am having some problem with the loft function , when i go for it the second sketch appears as an open group and i am not able to loft it. It will be great if you could explain how to resolve this issue
use closed group and then choose any of the sketch entities and then click done and repeat again with the other sketch
nice tuto . arent the blades suposed to have an outword curvatur along the edge of the compessor to push the air out ?
othman fikri
I like your attention to detail, that's awesome. Depending on the application, turbocharger compressor blades for example can have a reverse curvature. I didn't pay attention to the details in this as much as I probably should have, just presenting a method of how to make one.
i'm not able to coincident another corner of rectangle on circular arc. plzz suggest something to resolve it
Which time on the video are you having trouble with? Is it 7:00?
at time 1:41, how the other corner coincided with the circle i m facing problem in coinciding the other one
How much free of solidwork courses
pura miercoles
Great video, however that is not an axial compressor rotor, but rather radial.
Please do update with latest version
why would the blade have zero thickness if you sketch it right no the front plane?
李存勖
Hi! I didn't see the comment so sorry it took so long to reply. Those zero thickness errors can be frustrating. It usually happens when something becomes infinitely thin- I usually resolve my zero thickness errors by changing a dimension by 0.001 or so. If you're running high tolerances that may not work. You could also try making a new plane parallel to the you're sketching on and see if that solves it. If that doesn't help, do you happen to have a screenshot? You could post to the facebook page facebook.com/jokoengineering. Again, sorry for the delay
i actually tried to make the drawing on the front plane, the zero thickness error did not occur, but the final result looked weird. But when I tried your method, it looks fine. You don't need to apologize, I don't have any problems right now
李存勖
Dude! you are amazing at this. do you have a grabcad account?
I'm afraid I don't! Thanks very much.
Aside from the point that this is a Solidworks tutorial, which is good, it does show that just because you can draw something, does not mean it's correct. A turbo wheel always has to have the blades axial to the center axis, never, never tangential. Think about the centrifugal forces trying to bend the blades back to axial.
The video is great.. but I did it step by step.. basicly copying you.. and it told me that the loft operation was not able to complete..
That happens if your sketch is not fully constrained
Sir, your speed of showing is not fit for fresher.
thats good but this is not axial .
Not good for tutorial, it's too fast. You should what your video and consider how can people can follow your steps when you click this and that like lightning.
+Narong Wesnarat
Hi Narong,
This was made for those in mind who knew the tools I was using already. I have some existing tutorials to break down some of the process I used in this video.
Lofting:
th-cam.com/video/lGlDpDqSAm8/w-d-xo.html
Extruding:
th-cam.com/video/BIVftgErK7Y/w-d-xo.html
Patterns: (same principle as sketch or feature)
th-cam.com/video/1sJsDcOmX0I/w-d-xo.html
Hope the helps. Respond with any other questions you have and I'll make a video to clarify.
Could you be a little bit slow man...you design it too fast..