(R-07). Assign Wall Loads on Slabs-Residential Building Design - Etabs
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2020
- in this lesson we are going to assign the wall loads which located on slabs in our residential building design using etabs.
Playlist : • ETABS: Residential Bui...
20 Story Building Full Design:
• ETABS: 20 Story Buildi...
Excellent and Outstanding
We want more and more Video for beginners for complete building design using ETABS 2016 preferably
excuse me sir, are why assume the wall load is distributed equally to the slab? or we need to calculated it as line load?
sorry for my bad english and thank you for the tutorial
Will u send me how total length of wall been taken for calculation of wall loads
In the 2.42 second video how u calculated 18m^2 as the area of slab can u say the grid wise area taken to calculate the area
why entire slab area is taken while the wall load is only in cantilever slab and balcony parapet , please explain
Great tutorial...
this tutorial is very good
How did u calculate the area of slab as 10.76m^2
If u had calculated for living room it has dimension
11'6" × 12'= 138 ft^2 equal to
12.82 m^2
How u calculated as 10.76 m^2 in the video 1.08 second
Waiting for ur reply
No. Out of 12 feet some portions are
out of slab. Just condider only slab,not room. If u check again u will get it
Sir, could you explain me what are you using 0.7 as a factor for oppening. Please?
For the walls which has windows and doors I assumed 30% oppening for windows and doors. So the obtained wall load is 100%-30% = 70% or 0.7
Sir can you please say the dimensions of plot that u have taken...its not clear in video
Great tutorial!! if you also shown the codes (such as ASCE, ACI318 and building code), it will be great++. and at 5:27, where does the 4kN/m^2 come from?
The 4kN/m2 is an approximate value if you dont wanna calculate the walls load one by one.
Is it going to econmically suitable if i Consdier 4 kn/m2 each time i Design building?
sir can you please provide the autocad plan of the building you are doing? it will be easy for us to do accordingly. t
Best one....
Thanks.
Thank you so kuch
thanks to you dear
Thanks
Wellcome dear
why dont you take slab area of only balcony but you take total area of two slab as they are two pannels
why u assigned the laod of 0.035 as parapet wall not as wall load in SF
İn 2nd floor there is no wall on that slab because of terrace and I have calculated the parapet wall load of slab then assigned.
For sure check the dwg file.
It is a great tutorial👍
Thank you
Sir can u explain why you are assigining wall load on slab only on washroom area of first floor
Because they are located on slabs not beams.
Take a look to floor plans you will notice that the walls of washrooms located on slabs and the other walls on beams.
Sir can u share autocad files..the dimensions are not clear sir calculate the slab area
Check the description of video 1 2 or 3 you will get it.
please about total slab area value .
Sorry I dont understand what you said...
@@ehsantutorials5020 i said how u calculate slab area 18 & 10 m2
From architictural drawing ( CAD file ) also the slabs dimentions are certain you can find the slabs area by multiplying length and width easily.
@@ehsantutorials5020 im confuse u calculate in m and ur cad file in ft. thanks for ur reply.
Great Tutorial although no sound but through gives full explanation one would require
Thanks dear
Please educate yourself about load transfer, specifically for walls, before you post such tutorials