Making Custom Chrome Door Knobs - BMW 323 I E30
ฝัง
- เผยแพร่เมื่อ 30 ต.ค. 2021
- In this video I'm going to make four custom door knobs for my friends BMW 323 I E30 from 1985. The 36 years old original ones made from plastic became very brittle and fragile over the years and they break quite often. So I was asked to make some new ones out of stainless steel. We've decided to make the same design like the original ones, just have them polished instead of black. I also need to make four new rings. They had such clip things originally. As this technique does not work with metal rings, I've decided to use C-clips instead to secure them in place which worked perfectly.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Carsten Bauer
Gregory
Alex McGeorge
Alistair Moor
Amanda Moore
Amar.k
Anthony Eufemio
Arthur
Bendurion
Chris walter
David Barker
David Lowell
Edward Conway
flex
Haitham Al Zir
Huard de la Marre
Jean Ceppi
Josh Ledford
Josh Wasserman
Joshua Bentley
Kevin Hurwitz
Lambda GPU Workstations
Leo
Louie Carboni
Marius Costan
Matt Boothman
Mellissa Marcus
Monte Gibbs
Nick Houston
NoLoneSurvivor
Pong Lenis
potokslow
StevenVR
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Никита Дядин
Alex Bindon
Alex Breton
Alipasha Sadri
Amanda Taylor, Esq
Andreas Mimra
Andrew Egerton
Andrew Phillips
Arni Bjorgvinsson
audi4444player
Blake T
Bonnie Williamson
Brian Hoerl
Chad Bryant
Chris Brentano
Crystal Cash
Daniel Trejo
Daniel Varga
Danielle Roberts
Dave Cannon
Dave Hardware
Embiss
Ethereals
flowercrownbouncer
Geoffroy
Grant Daniel
Grok Senften
Haley McFadden
Hunter R.
Jack Curry
Jamie Warrick
Jason Koi
Jeremy Cole
Joël Franusic
justin f.
Kelly Imgrund
Ken Rosso
Kurt Gazow
Marc Cerisier
Marc Staedelin
Maxim
Mellissa McConnell
Michael
Micheal Bier
Michael Lamp
Mike Donaldson
Noah Schwarz
Norm Haldorson (Bad Wolf)
Pasacal Schmikal
Pelec
Peter Cyprian
Ray Yeager
Regis Vincent
Rev. Gina Pond
Robert Todd
Sarah Langlais
Scott Marshall
Sergei Shvartsman
Steven Michalcewicz
Steven Stowik
Suiros
Svenja Kuckla
Tim Holt
Trevor Kam
Tucker Ifft
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
• Building a Huge Rotary...
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics
![แข่งแลกของ 1 วัน!! ของใครแพงสุดชนะ!! [Ver.2024]](http://i.ytimg.com/vi/joRT59ilPHg/mqdefault.jpg)
I'd also like to thank Pong Lenis for being a Patreon and giving me a chuckle at the end of this great video!
My mind is so dirty i read that wrong 😩
@@kikiy245 that's because it was likely meant for you to read it wrong! LOL
Sad/broken world we live in.
Oh man, great find haha
I'm out of the dirty mind game that I completely read it as is before realizing what it was supposed to mean haha
Our daughter asked “how long do you think it would take ‘the fixer man’ to restore an entire car!?!”
She loves watching your videos :)
it depends of......how bad the situation is.......when its bad.......so yeah he make a new one!!!!
Well if it's an original mini that you're adding 4 wheel drive and a turbo to, at least 9 years 😉
@@kyleeverly9243 lol. I'm waiting for the continuation as well 🤣
…. Tell your daughter she planted a seed ;)
That’s funny since he’s now restoring an entire car 😊
I'm guessing you added about 40 horsepower to the vehicle. Well done!
That was a good one!!! I'm still laughing while writing this! :-)
In the engine or on the weels?
@@sergioguerra1246 likely the feel in the seat 🤣
The 300 meme.
@@tvguy12346 Perfect!😀
I'm sure this just increased the value of that car! Beautiful work, as always. Thanks for sharing.
Thanks for watching!
Spectacular custom chrome Door Knobs !!!!!!!!!!!!!!!!!!
I must confess, that I've been watching many other restoration channels of late while eagerly waiting for your updates, and I am still floored, absolutely impressed, with how meticulous you are, and how much attention to detail you have, which, while may not be a standard practice, or necessary, but only because it makes the project more aesthetically pleasing, or even safer for the user, is just so very satisfying. Thank you for sharing your work with us. Might I mention, that same ethic is also applied to your video taking, editing and posting! You're a whiz not only at the toolbench, but also before the computer!
I too have been waiting for a new video, but a channel that lets me get my machining fix is Cutting Edge Engineering down in Oz.
@@Renville80 Oh my, if their quality of work is anything like my mechanics, I'd gladly give them a look. Thank you for the suggestion!
This guy is the best, for sure.
@@Renville80 a bit different to the tone of this channel, but I've been watching Curtis at CEE for a while and he's a true professional
I agree I’ve tried to watch other channels and it’s just not the same for me . I only started watching these types of videos a month ago
¡¡ Wow!! four luxury details that raise the quality of the car. Cool
Car communities all over the world would give you so much money if this is what you did for any random car.
I know nothing about milling steel etc. I enjoy this man's work but especially his methodical ways and his freakishly neat work spaces!!!! 😀
Your friend has excellent taste in cars. He now has the one BMW with the most famous door lock thingies.
she* ;-)
@@mymechanicsinsights oh well, that's what she gets for not driving a girly car like a Fiat 500 or a Porsche Cayenne. 😉
Thems definitely gonna be the nicest door locker knobs in the apocalypse
I cut the front end of a 3er off with a chisel for a friend. The welder/painter guy was amazing.
This project will open the door to many possibilities 😀
Subtle improvement over the black plastic. Very nice
I love the sound it makes when the lathe jaws release.
This makes me miss my 1986 318i so much...
great car
@@mymechanicsinsights showed a photo of it to my wife and she told me it looked like a mafia car because how big the 'windows' were. Still kick myself for selling....
Having my mechanics as a friend, you can rest assured no project is impossible and you can dream big ❤️
That's how BMW should have made it. A car that would last a lifetime.
E30 are still the nicest models
I need a friend like you in my life... 😍😍😍
It must be cool to have a friend like you.
They're gonna get hot in the sun!
It’s tiny little things like this that really make a vehicle pop.
It was a very nice car, but with those knobs it turned into a fantastic and beautiful car
This time they will nevee ever get destroyed. It looks awesome
Wow! So precise and neat!
Impressive!!! Your attention to detail is unrivaled.,..great work!!!!
Superb workmanship ..please make more videos…
Nice as long as the pull knob doesn't make noise when it contacts the metal ring over bumps in the road etc.
yeah I was worried too, but works fine
Now.... it's ready For Autobahn 🚗
let's go!
These will last forever👌👍
Man being a machinist with a lathe and the know-how is an incredible skill to have. You can practically make anything 💪
"the engine is not working properly... i make a new one"😅
Doors fell off... I make new ones
The joke didn't work. I make new one.
No more plastic breaking... But now you have to worry about fingerprints 😋 Well done!
Man, where can I find a friend like you??? That was beautiful... 😍😍😍
80’s cars have very few redeeming features (Golf gti cabriolet aside). You’ve done that boxy vehicle a huge favour!
Thanks, I'm glad you like it :-)
Woooow! Now we are talkings about! Going to the next level!!
this is lucky man to be friend of the great my mechanics ❤️
That looks so classy, on a beautiful car. It really does. Here in Australia during summer, you would have to use a cloth to grab hold of a metal nib. Internal car temperatures can get up to 80℃, leaving a nasty burn, touching anything metal.
А в у нас в России зимой может замёрзнуть и тогда машину не открыть😁
80°C?????? my water heating system goes to 75°C at max, the seats and dashboard would literally be melting in there
@@adelalsaffar7762 INTERNAL temperatures IN the car, smartass
Well, I suppose in Switzerland, where this car is driving around, this won't be a problem, but I still think it was not good to make them out of metal, because given the thermal conductivity, in alpine winters, when temperatures drop well below freezing… He should have replaced it with other plastic parts or anything else nonmetallic.
At our mile high altitude in Colorado, water boils at 91C or 196F. 80C is 176F.. that’s very 🥵
Your friend has great taste
I have always hoped that a friend who can make something you need is a good kind of friend. That's the kind of friend I have tried to be. This guy takes it to a new level 🙂
Your friend has good taste in cars
They look much better then the plastic ones.
If manufacturers made stuff to begin with, the way you make items; likely there would be CONSIDERABLY less need for any replacements as the entire product would last so much longer!!! Like they used to make things! Nice touch to a cool older car!
Well said!
Teacher as we say for Uruguay in Spanish. Best regards and admiration for your work. Ezequiel. 😎
Please restore old models of cars 🚗 btw good videos stay blessed
Those are sweet. Using the circlip was a genius move
Yeah thought about it for very long time how to secure it
Absolutely fantastic unbelievable skill and talent 👍👍👍👍
I had to share this car with my husband. He loves himself some Beamers. 🙂
Love it... Over-engineering at its finest!
Beautiful work.
I think now your friend should buy a new car for this beautiful door knobs :-)
My mechanics doing car things in a BMW? I'm in heaven
She also requested a new gear knob in the same style ;-)
I honestly expected to see the entire vehicle in pieces 😎
OK, now all I’m thinking about is a collab with « M539 restoration » !
I miss my e30!
Great job!
incredible as usual and filmography to boot.
It's the little details like this that let you know when a car is truly loved.
Behold, everyone! *He making a new one!*
this is great. more car parts like this please
Комментарий в поддержку канала и ролика, а также труда мастера.
Didn’t think this channel could get better but custom improvements to classic cars? I’m IN
Insane! This is pure ART!
Worthy of the finest and most exclusive Rolls Royce, this BMW is now worth more than a Phantom!
I really like the waterproof (IP 67) caliper.
Beautiful. It must be great having a pal like you !!
Nice! The metal "grommet" looks great and ads the layer of detail we've come to expect from you - but if the car has a vibration, the metal to metal noise may be bothersome.
Version two can have a recess cut into the inside of the grommet for an o-ring to dampen any rattling noises that could happen. :)
Before watching, I was expecting you will made gearbox lever haha, nice job !
7 hours ago that what l like. yay my mechanics. #1 channel here
Thanks for your support :-)
Tell me that you are from switzerland without telling me you are from switzerland
So you have a badass car like this, and you decide to make a video about making a custom DOORKNOB
Love your vids man
I just saw the name Daniel Trejo on the Patreon list. I pictured the actor Danny Trejo watching intently, looking like he's going to destroy the whole world as usual but actually is loving the mirror finish. If he watches restorations, I guarantee his favorite parts are the precision details and mirror finishes. (Just heard "gotto get rid of those rough edges" in his voice in my head.) He'd probably also watch with his grandkids.
BMW E30 is such a mymechanics car...with a full engine rebuild, of course ["made a new one"].
damn beautiful e30
The car looks really good your friend is lucky
Brilliant, you have now gained around 10,000 new BMW subscribers & made all of them jealous👏👏👏👏, 👍fab…..
I hope so ;-)
Lovely ride and awesome knobs!!!❤👍
@7:21 ... Audi Style "MyMechanics " Logo on 1985 Beemer, Dope!
Now that is something very cool...Thanx.
I am surprised that such a nice car would have cheap plastic crap for door locks. The stainless steel looks so much nicer!!!!
You should restore a complete old car once! Make a series out of it. That i’d love to see!
I enjoy watching all your restoration projects and your perfectionism. Keep it up. Cheers!
Breakfast with my mechanics... can't think of anything better 😊
I am certain the value increased!
Nothing like having door lock knobs that will last for 1,000 years. :-) (I drive an e30 myself, and wouldn't mind having some of these too.)
Now I want these knobs for my car! Never mind that these knobs and trim rings are worth more than my entire car, or me not having the means to buy them, I still want these knobs and trim rings!
I have been waiting for this. Clicked like and will now watch.
If I had your skills and tools I would have made the whole car and with the Knob.... Great job as always.... I make new one....
go for it ;-)
Thank you for the time you invested in editing this and all of your videos. Also, thank you for showing the layout for the project with the dimensions.
2 4 1 on that part, door lock button and tiny beautiful mirror
You have very lucky friends
Without words, the most beautiful knob I've ever had the opportunity to see.
Ooh, I wish that I could do what you do. I'd like to make the things around me higher quality, too. Thanks for posting!
simple way is to not settle for crap. So if you cant make it, dont buy crap, have fewer things to begin with and slowly we get back to having quality over quantity in life :).
thats exactly my dream lmao, own a machine shop and make everything i own unique and fancy
Wife is broken, I make a new one
Buenos tardes, como siempre, un excelente trabajo, desearía que fueran con mayor frecuencia, mil gracias!!!!!
Beautifully done
The machining skills this man has is ungodly.
Excellent 👍👍👍 . Thanks for sharing
Hell yeah, now that's a nice car 👌
That is my dream car, very nice job
Much better than original! Congratulations!
Wow, thank you!
This car is amazing
Looks good! No stone will be left unturned when it comes to your restoration. Your wide range of skills always impresses me!