It’s all one step at a time bro, start with the things you can do now and build on it from there. Looking back I think I would go down to a 22” rim just to open more tire options. What kind of truck do you have? I love stock height and lowered dually s with a nice wheel set up. I think big lifts should stay on single rear wheel trucks.
Hi, looks really good! if you choose to not use super single at the front, do you still go with positive 1 offset to make 35" fit on stock suspension? Tony Linell, Sweden 🇸🇪 ✌
We’re ya get your wheels from was it a complete set I love how they don’t stick out how is spacing between rear tires I tow heavy was seeing if tires are touching
Hey Steve. I got my wheels at a local tire shop. I have about an inch in between the tires. I have the E rated 12 ply nitto G2s, I just had a 6000lb pallet of stones over the weekend and not even a budge in sidewall flex. Ripped down the highway at 75 smoother than empty.
Would a leveling kit alleviate the need for trimming? I have the same programmer except it is branded as hypertech. No need to hook it up to power. Just the OBDII port is enough.
As long as you have the proper axel ratio and not towing fully maxed you will be fine. I pull my 17000 lb 5th wheel no problem. No trans temps issues nothing.
Thank you for the video I ended up doing 22-in American Force Wheels on 37 in tires on my 2019 dually with a super single. my truck has a much wider stance and the tires come out of the sides which I like that look but yours looks nice as well I also did a step because my duly didn't have one all together I spent $18,000 and it was worth every penny. Oh I should also mention I did a three and a half inch lift in the front and a 2 in the rear it has a perfect stance where the front is just a little higher than the rear which I also like. My duly doesn't have those fender flares I'm wondering if you know where I can get fender flares I have the granite paint it's like a gray thanks
I shouldn't say lift but it's a leveling kit in the front and back also my rims have a huge offset like deep dish rims which I like that look as well that's why I didn't go with the traditional dually front tire I'm surprised you didn't have an offset whereas you could have just put in regular dually tires without getting a super single couldn't you have?
Hi Rouben, Sorry I actually sold this truck and went back to a long bed. Pulling my Fifth wheel I still had around 6-7 inches of rail clearance on a level 40’ trailer.
Sorry for the delay. So the part number from Rough Country is 90019, it shows 2019 Ram truck and keep. I have used it on both my 2019 and 2020 and it works perfectly. Tried to snap a pic but I don’t know how to attach it to the reply on here. Hope that helps.
Far from it. It’s all about timing when you buy stuff, setting goals and working your ass off to get things you would like to have. I started with a 300 dollar truck and slowly worked my way up over time. You will not get things over night so don’t loose hope, just keep chipping away at your goal and it will come full circle. Just remember there are no free hand outs and no easy roads if you want to be free in life.
Those are Haida mud champs in the video. Do not buy them!!!!! Lol I had to replace them due to being out of round. I went with Nitto Terra Grapler G2s.
Shit the price of crap now I would not doubt it. Those were actually not to expensive at all. You go get the forces or other forged options and Def looking at 15-20 min
That truck looks amazing and such good info. I don’t even have a dually and I watched the whole video. Good stuff.
Thanks!!
Good video
Love the truck....ready to get started on mine
Thanks brother, what are you working on?
Looks great and I like it. That’s what I would like to do to my Dually without lifting it. Can’t wait to see what else you’re going to do to her.
It’s all one step at a time bro, start with the things you can do now and build on it from there. Looking back I think I would go down to a 22” rim just to open more tire options. What kind of truck do you have? I love stock height and lowered dually s with a nice wheel set up. I think big lifts should stay on single rear wheel trucks.
Life saver...money saver too....great info
Informative I like your idea with the melt the plastic instead of grind
It’s a bit more effort but will protect the electronics that are back there. With the price of trucks you got to protect the investment.
Very nice. That’s the way to do it without cutting nice truck.
Do an updated vid with all mods so far and the overall truck experience
The screens, not sure if you still have the truck but I want to see those
With the fuel rims witch offset did you go in the rear, stock , leveled , lifted ?
Hi, looks really good!
if you choose to not use super single at the front, do you still go with positive 1 offset to make 35" fit on stock suspension?
Tony Linell, Sweden 🇸🇪 ✌
And also, what spacing is your wheels? Street, lifted, or extreme?
Why do the wheels stick out? Do you know the offset? I have ran all the way up to 26” American Forces with adapters and they did stick out that far.
We’re ya get your wheels from was it a complete set I love how they don’t stick out how is spacing between rear tires I tow heavy was seeing if tires are touching
Hey Steve. I got my wheels at a local tire shop. I have about an inch in between the tires. I have the E rated 12 ply nitto G2s, I just had a 6000lb pallet of stones over the weekend and not even a budge in sidewall flex. Ripped down the highway at 75 smoother than empty.
Would a leveling kit alleviate the need for trimming? I have the same programmer except it is branded as hypertech. No need to hook it up to power. Just the OBDII port is enough.
I have a 2011 with 35s leveling kit and doesn't rub
Where did you get the smoked fender lights? Great looking truck
They are actually the stock lights
Whats the rear offset and did you use spacers?
👍😎❗
Looks good....but can you tow for long distance with this?
As long as you have the proper axel ratio and not towing fully maxed you will be fine. I pull my 17000 lb 5th wheel no problem. No trans temps issues nothing.
How did these Haidas hold up over time?
Thank you for the video I ended up doing 22-in American Force Wheels on 37 in tires on my 2019 dually with a super single. my truck has a much wider stance and the tires come out of the sides which I like that look but yours looks nice as well I also did a step because my duly didn't have one all together I spent $18,000 and it was worth every penny. Oh I should also mention I did a three and a half inch lift in the front and a 2 in the rear it has a perfect stance where the front is just a little higher than the rear which I also like. My duly doesn't have those fender flares I'm wondering if you know where I can get fender flares I have the granite paint it's like a gray thanks
I shouldn't say lift but it's a leveling kit in the front and back also my rims have a huge offset like deep dish rims which I like that look as well that's why I didn't go with the traditional dually front tire I'm surprised you didn't have an offset whereas you could have just put in regular dually tires without getting a super single couldn't you have?
I could have but I like the super single look over the dually fronts.
You should totally post some pics we would love to see what you got going.
@@JimmyDs 100% I will
Did you find this in a set?
What’s the offset on the rears?
LOL dude you beat your truck with a hammer...
I tow a fifth wheel but I do want your set up. Would you measure the opened tail gate height. Wanna know how much the truck raises from stock. thanks
Hi Rouben,
Sorry I actually sold this truck and went back to a long bed. Pulling my Fifth wheel I still had around 6-7 inches of rail clearance on a level 40’ trailer.
ill never understand the rear wheels do they have to be a certain width & do you need spacers for them not to rub each other ?
No I did not have spacers. Depending on the offset and width of the tire you don’t need them. If you tow I would not use spacers
What are the offset of the wheels? This looks so much better than the fronts looking like cones
So they were a -1 offset. I had -12 on my last with slight rubbing on a leveling kit. But the -1 only needed the slight mods as shown.
What was the bolt pattern when for the front? You had to take off you adapters correct?
Hi Ruben,
The front with the spacer removed is the 2018 and older 8x6.5 bolt pattern. The rears will remain the new 8x200mm.
JDODGE appreciate it, just ordered mine
Post some pics when it’s done brother.
I have an 04 ram 3500 drw 2wd, do you think I could fit 35s without offset? Or maybe with just a 2in level?
So the older 2WD trucks sit a bit lower than the 4WD. It might be possible with the right offset but I honestly could not tell you for sure.
@@JimmyDs what kinda cutting would I need to do then?
Is this the rough country programmer for the 06 -17? I couldn't find one that was for the 5th gen RAMS
I’ll take a pic tomorrow but it is for the 18-20
@@JimmyDs thankyou so much. I appreciate it! Need one for my 2019. Thanks man.
Sorry for the delay. So the part number from Rough Country is 90019, it shows 2019 Ram truck and keep. I have used it on both my 2019 and 2020 and it works perfectly. Tried to snap a pic but I don’t know how to attach it to the reply on here. Hope that helps.
Hey man this is perfect! I really appreciate it. Thanks for your help !!!
Wgat off set is the rear wheels?
Oh I do not remember. I sold the truck.
Does your truck have rear air ride?
Yes it had the factory air bags in the back.
How does it feel to be rich?
Far from it. It’s all about timing when you buy stuff, setting goals and working your ass off to get things you would like to have. I started with a 300 dollar truck and slowly worked my way up over time. You will not get things over night so don’t loose hope, just keep chipping away at your goal and it will come full circle. Just remember there are no free hand outs and no easy roads if you want to be free in life.
Does the inside of the front tire rub against the sway bar? Mine does stock but I think if I went with 33s I think it might actually clear
No the cleared with no rubbing
Whats the offset of the rear wheels?
I totally forgot what it was. I do believe it was like a -170 or something around there. I’ll try to look it up.
What brand tires are those?
Those are Haida mud champs in the video. Do not buy them!!!!! Lol I had to replace them due to being out of round. I went with Nitto Terra Grapler G2s.
The picture on the thumb nail is the Nittos
Nice truck! Was the Fuel wheel spacing the street, lifted or extreme?
15 grand in rims
Shit the price of crap now I would not doubt it. Those were actually not to expensive at all. You go get the forces or other forged options and Def looking at 15-20 min
DON’T