1. What are the benefits of doing this? The RAVE valves build up deposits from the exhaust and will hinder the performance of your sled if left uncleaned for too long. 2. When should you do it? It depends on the year of your sled and how much you ride. If yours is from the same era I would clean them seasonally or if you feel a performance loss. 3. What problems could it solve? It will restore power and top end performance that may have been lost by having dirty RAVE valves.
From what I've read, R.A.V.E valves close off the top part of the exhaust port and changes port timing. This gives the engine better low speed power without sacrificing high speed power.
1. What are the benefits of doing this? The RAVE valves build up deposits from the exhaust and will hinder the performance of your sled if left uncleaned for too long. 2. When should you do it? It depends on the year of your sled and how much you ride. If yours is from the same era I would clean them seasonally or if you feel a performance loss. 3. What problems could it solve? It will restore power and top end performance that may have been lost by having dirty RAVE valves. I hope that helps.
@uncordobes They add to the performance of the sled and cleaning them just ensures that they operate correctly. It's maintenance. I'm over simplifying it but thanks for watching.
Check the other one and see if it has one inside of it. Mine do not have that ring you are talking about and I don't believe there should be anything like that inside the bellows.
Search for parts online. Check the price if you have a local dealer near by, then check online for snowmobile parts. You can find some of the best deals online.
If you don't have a manual I'd suggest doing one at a time. Its easy to forget which little hole goes up or down and such. I gotta do this to mine. My dad don't have internet up at his place so I cant watch this while working. :(
Do you happen to know the part number for this valve? I have been looking everywhere for a rebuild kit for one of these and there appears to be 80 million revisions but I cant find this specific one.
I am very intrested I want to start youtube and actually upload videos but I'm not sure what to use to record or edit the videos, my dad is a mechanic and has taught me a lot and I want to share my videos from alaska, from rebuilding four wheelers to snow machines, to hunting videos and fishing videos but I would like to know what gear is good to use for recording and what sites on the computer is good for editing, if you could help me out that would be greatly appreciated
It really will depend on home much money you have to spend. If you don't need an action cam find an inexpensive Sony HD camcorder like the HDR-cx 405 and Vegas editing software. It doesn't have to be the most updated version of vegas. Sony used to make Vegas but it got bought out by Magix. The Older versions will be cheaper.
1. What are the benefits of doing this?
The RAVE valves build up deposits from the exhaust and will hinder the performance of your sled if left uncleaned for too long.
2. When should you do it?
It depends on the year of your sled and how much you ride. If yours is from the same era I would clean them seasonally or if you feel a performance loss.
3. What problems could it solve?
It will restore power and top end performance that may have been lost by having dirty RAVE valves.
Paisteboy Thanks, mine is a 2003 Summit 600 Ho
Yes, I would follow that procedure that I laid out. Thanks for watching.
From what I've read, R.A.V.E valves close off the top part of the exhaust port and changes port timing. This gives the engine better low speed power without sacrificing high speed power.
Good video. I have a few questions:
What are the benefits from doing this? When should you do it?
What problems could it solve?
1. What are the benefits of doing this?
The RAVE valves build up deposits from the exhaust and will hinder the performance of your sled if left uncleaned for too long.
2. When should you do it?
It depends on the year of your sled and how much you ride. If yours is from the same era I would clean them seasonally or if you feel a performance loss.
3. What problems could it solve?
It will restore power and top end performance that may have been lost by having dirty RAVE valves.
I hope that helps.
@uncordobes
They add to the performance of the sled and cleaning them just ensures that they operate correctly. It's maintenance. I'm over simplifying it but thanks for watching.
Do those need to be torqued ? If so, what are the specs?
Not that I'm aware of.
What does cleaning out the RAVE valves actually do or improve? Is this just a maintenance procedure? Great video!
Thanks for the video!
You're welcome!
Cool. Thanks for watching.
Soak them in acetone overnight. (The valve Blade only) They look brand new with no scrubbing. Your welcome!
Worked fine the way I did it.
Check the other one and see if it has one inside of it. Mine do not have that ring you are talking about and I don't believe there should be anything like that inside the bellows.
Rotax Adjustable Variable Exhaust
mine look a little different on my '02. soon as the ground freezes up i will get mine inside and do my rave valves
Search for parts online. Check the price if you have a local dealer near by, then check online for snowmobile parts. You can find some of the best deals online.
your old lady must buy the paper towel at your house lol
Yes. We buy it in bulk at Sam's Club.
If you don't have a manual I'd suggest doing one at a time. Its easy to forget which little hole goes up or down and such. I gotta do this to mine. My dad don't have internet up at his place so I cant watch this while working. :(
Kinda of a stupid question but what exactly do the rave valves do????
Increases exhaust port size at higher rpm
Do you happen to know the part number for this valve? I have been looking everywhere for a rebuild kit for one of these and there appears to be 80 million revisions but I cant find this specific one.
No. Sorry.
Very nice. I will be doing mine in the next few days. Where you located? I have an 01 700.
James McGath
Upstate NY. I sold that sled a while back. Bought a brand new 2016 Blizzard.
Thanks for watching.
I use a brass wire wheel for my dremoll tool.Work's awsome.
Yes. That it a good option if you have a dremel. I have a really old one but never use it.
Can you do a video replacing a fuel filter I have a 1999 formula 800
Sorry. Sold that sled 5 years ago.
could i use a wire wheel to clean the valves?
@theboarman
Depending on the condition of the hood it could be anywhere from $50 to $250.
Thanks never thought of it Im doing this today
Does this work the same on the 600? I have a 600 h.o 2003
It's not going to be exactly the same but it will be very similar.
@@Paisteboy oh, okay 👍
I did this to my Sea Doo as well. They were stuck. You can order a RAVE repair kit.
Good to know. Thanks for watching.
@paisteboy how much does a hood cost for a 200 mxz 700?
when is part 2 coming out
instead of using the brass brush, would a scotch brite pad work
I'm sure a scotch brite pad would be fine.
paisteboy those are just ski doos version of a power valve
@FearlessRomp
maybe later today.
@gujada9776
Yes on the metal pieces only. I would be more careful though.
would this be similar on a ski doo MXZ 670?
I would think so but I'm not sure since I've never had or worked on one.
Could this be my issue of my 95 670 formula ss bogging when I pin it
Yes. Dirty R.A.V.E. can make a sled bog or run sluggish.
Hey man thanks!
You bet! Thanks for watching.
8 years ago and your still replying? Holy you like what 60 now?
@@kyronplayz7210 Not even close to 60 but I do appreciate my viewers.
What do you use to make your videos, I really enjoy watching this! -Brandon R
At that point I had a SONY camcorder non HD and edited with Sony Vegas 9. If you're interested it what I use now let me know.
I am very intrested I want to start youtube and actually upload videos but I'm not sure what to use to record or edit the videos, my dad is a mechanic and has taught me a lot and I want to share my videos from alaska, from rebuilding four wheelers to snow machines, to hunting videos and fishing videos but I would like to know what gear is good to use for recording and what sites on the computer is good for editing, if you could help me out that would be greatly appreciated
It really will depend on home much money you have to spend. If you don't need an action cam find an inexpensive Sony HD camcorder like the HDR-cx 405 and Vegas editing software. It doesn't have to be the most updated version of vegas. Sony used to make Vegas but it got bought out by Magix. The Older versions will be cheaper.
Thank you very much! I really enjoy your videos keep at it
You're welcome.
my sled won't start, we have gas compression and spark. Could this be the problem?
Possibly. Is the sled definitely getting fuel? If not sure try putting a very small amount of pre-mix fuel in each spark plug hole.
paisteboy we did that, still didn't start, do you have any other suggestions?
The only thing I can think of is bad fuel or maybe it's flooded. If you smell a lot of gas it could be flooded.
My skidoo is a bit sloughish almost like she's cold sometime would this be the problem maby
newfie stunts team
Yes. Absolutely.
oven cleaner works well
thanks body.
I cleaned my rave valve and now the idle rpm is at 3000 instead of 1000...how do I reduce the rpm??
What_is_my name unscrew the idling screw on the carb a bit
497
?
finally someone who doesn't wear them gay ass gloves
K