This controller is so powerful! I purchased the 80a version for my 1500 W hub motor and I’m currently running 45 A. The torque is literally twice as much as my stock controller that came with the kit. It is so worth the money!
do i just directly connect the phase ring connectors from the motor straight onto the terminal ports on the controller? My kit did not come with a terminal junction and no phase wires on the controller.
Any idea how to wire the key (on/off functionality) to the ignition switch? I have seen one way but mine is currently wired to turn on my lights and activate my horn?
Hello thanks for your videos very informative. I do have a solid green light and I do check pretty much everything and I didn’t find anything wrong but still my controller doesn’t work any suggestions I’ll really appreciate thanks
@@bobikleeds hello thanks for your reply. That’s the other problem it didn’t pair with Bluetooth well actually it doesn’t appear visible the MQCON controller any advise?
My (sabvaton 72150(m) controller came without anti-theft plugs. I would like to know if I can use any other wire in its place? I know the Orange (e-lock) connects to key lock voltage side, Brown (mtr signal) to blue phase wire, but not sure where to connect the Blue (anti-theft wire) my controller doesn’t have that wire. Any help would be greatly appreciated.
EverythingElectronics Channel hey man. I buy mine from siaecosys or qs electric drive store. Same thing really. These are no display versions also used for electric scooters. I only use these. Less problems in general.
@@bobikleeds I'd never heard of them before but they look great, a simple lineup with all the connectors. If I need another one I'll go for them. Thanks!
I bought an alarm with ebrake lock for this controller but the connectors are different I don’t mind changing the connectors but I need to know the wiring color connections. The alarm came with two plugs one plug two wires red and black the other plug three wires orange gray and blue can you help, which colors to connect? Thx.
Hi I have issues with sabvoton I have a 150 amp and I have brand new and when i plug into battery I get know red light and nothing happens,am I defective or the no directions that came with bike I am building.Do I have to do something with bluetooth to get it too light up and work please explain if you dont mind Thank you for the video
Добрый день. Есть сомнения по подключению одной ручки газа на 2 контроллера. Правильно ли я понимаю что нужно просто заппарралеоить 3 провода от ручки с 2 контурами по цветам. Или всё таки какую-то диодную развязку делать? Не могу найти схему в сети может вы что подскажете?
@@ВиталийКулабухов-й3ж yeah. Not without looking inside which i have no time for. The sabbies i use are none display version and they already come with 6 wires on hall plug. I would also assume that your sofware would not support the temp sensor but not 100% sure.
Hi monster bikes UK, I have changed my controller because the old one stopped working, now I get a error (protect contoller) sometimes and losses the throttle, then when I switch it off and then back, its perfectly fine, can you please guide me on what to do next
I have a problem how I know what low speed or hi speed?? I by pass the display I only use the app.. I have 2000w hub and 52v with a 100amp sabvonton controller stuck on 32mph something is wrong it’s slow!
How's it going.. I have a 72/150A controller with the TFT750 display running a 5000W Risun motor.. When I turn the throttle, it goes one speed until half throttle then goes a higher speed, and stays that speed from mid to full throttle.. How do I set it up so the speed increases gradually as I twist the throttle a bit at a time? I am using the android app on my phone to access the parameters menu.. Thanks..
What you are talking about is flux weaken and that cant be adjusted. You can increase or decrease the flux but it always work the same. Once it is launched at half throttle it goes all the way.
Hey. It is used for diagnostic tool or i use it with my ant bms display. It is hooked up to the display to show the speed. Otherwise you dont need to plug it in.
im having problems with connecting usb (usb not recognized - device descriptor request failed) got whole setup used and I'm using different data USB cable. can you help? mowisz po polsku?
Hello, I had a sabvoton svmc 72100 and it came with one plug that has both brake disconnects, the throttle, and display and that plugs into a plug on the bike that consolidates those 4 things. I bought a 72150 to replace it and it does not have the plug, it’s the same as yours. Do you know how I can wire it or do I just need the controller with the display prewired?
Bob Budowniczy Darn, oh well. Thank you for quick response. I was trying to wire it up without display, I hooked up both pos and neg and connected to the battery. I don’t have an orange wire and I could not get the red light to go on. Any ideas, I’m a newb here and appreciate the help!
I have a lot of trouble with English can you explain to me how to connect the regenerative braking function? because I have an Express Accelerator and I also have a sensor that knows when I brake, I have them connected but when I brake nothing happens the accelerator for braking does not work! And on your video I did not understand how to connect it .. you have to connect it to the negative of the controller? Thank you so much ! 😉
@@bobikleeds no to mamy ten sam model prawdopodobnie . jest kilka modeli i każdy ma inaczej wyprowadzone przewody . np: na lcd ,na alarm itp. PCB w 72150 z 2019 roku ma kilka wolnych pinów do których prawdopodobnie można dodać jakieś funkcje . pytanie tylko skąd dorwać taki schemat z opisem wyjść :J3, J6,J7,J23
I hooked up this controller and my speedometer doesn't show that I'm moving it stays at Zero, the cruise control doesn't work either, i need help how to fix these two problems?
Hello. What speedo do you use? This version of sabvoton does not support any display. On my bikes i use the ant bms display for battery and you can plug in the hall wire from sabvoton to it so it would show speed.
Hi Bob, I have a Sabvoton 72200 flashing the green light. The manual says this is how Sabvoton tells the user there is some kind of problem. Typically during functional operation the green light is off and only the red light is on solid. I don't know how to fix this or how to test this controller. The seller is not responding. Can you help me? I have a voltimeter. Do you know where someone can service these controllers in the USA? Thanks!
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
This controller is so powerful! I purchased the 80a version for my 1500 W hub motor and I’m currently running 45 A. The torque is literally twice as much as my stock controller that came with the kit. It is so worth the money!
Why is this channel not continuing with beautiful things
where is the display connector?
do i just directly connect the phase ring connectors from the motor straight onto the terminal ports on the controller? My kit did not come with a terminal junction and no phase wires on the controller.
How do I hook up anti theft locked wheel?
Hi what about lock motor and alarm function!!!!
try putting a battery in your key fob if you haven't thrown this part out yet.
I just watched your video on the wiring of the A
SVMC 72150 and it does not show how to get it to work with a display there are no wires for a display
Thank you, this was helpful for wiring my ebrake cutout.
where do you plug lcd display?
Any idea how to wire the key (on/off functionality) to the ignition switch? I have seen one way but mine is currently wired to turn on my lights and activate my horn?
Hello thanks for your videos very informative. I do have a solid green light and I do check pretty much everything and I didn’t find anything wrong but still my controller doesn’t work any suggestions I’ll really appreciate thanks
Hey. Please use bluetooth dongle to connect to the controller and see if it shows any faults.
@@bobikleeds hello thanks for your reply. That’s the other problem it didn’t pair with Bluetooth well actually it doesn’t appear visible the MQCON controller any advise?
Did you connect the ignition properly?
@@bobikleeds yes I do connect the orange wire that says e ignition to the positive
And actually it turned on green solid
My (sabvaton 72150(m) controller came without anti-theft plugs. I would like to know if I can use any other wire in its place? I know the Orange (e-lock) connects to key lock voltage side, Brown (mtr signal) to blue phase wire, but not sure where to connect the Blue (anti-theft wire) my controller doesn’t have that wire. Any help would be greatly appreciated.
anyone know the throttle and display that are perfect for the connects on this controller?
Hi, can you give video examples for the e brake throttle use case? And the 12v brake wire. Thankyou
Super! Tengo una problema con ajustes. Start muy lenta. Que parametros tengo que ajustar?
Very good video, clear and to the point. Where did you buy yours from as every one i see seems to have a different range of connectors?
EverythingElectronics Channel hey man. I buy mine from siaecosys or qs electric drive store. Same thing really. These are no display versions also used for electric scooters. I only use these. Less problems in general.
@@bobikleeds I'd never heard of them before but they look great, a simple lineup with all the connectors. If I need another one I'll go for them. Thanks!
hello! he works on SW900 LCD PAINEL? THNX
Where do I plug in the battery into the controller?
I bought an alarm with ebrake lock for this controller but the connectors are different I don’t mind changing the connectors but I need to know the wiring color connections. The alarm came with two plugs one plug two wires red and black the other plug three wires orange gray and blue can you help, which colors to connect? Thx.
Hi I have issues with sabvoton I have a 150 amp and I have brand new and when i plug into battery I get know red light and nothing happens,am I defective or the no directions that came with bike I am building.Do I have to do something with bluetooth to get it too light up and work please explain if you dont mind Thank you for the video
Добрый день. Есть сомнения по подключению одной ручки газа на 2 контроллера. Правильно ли я понимаю что нужно просто заппарралеоить 3 провода от ручки с 2 контурами по цветам. Или всё таки какую-то диодную развязку делать? Не могу найти схему в сети может вы что подскажете?
Hi, tell me where to solder the wire to the temperature sensor to sabvaton?
Its in the hall plug. You should have 6 wires in that plug.
@@bobikleeds I have 5 wires. Maybe you know where to solder the wire to the controller? The name of the contact.
@@ВиталийКулабухов-й3ж yeah. Not without looking inside which i have no time for. The sabbies i use are none display version and they already come with 6 wires on hall plug. I would also assume that your sofware would not support the temp sensor but not 100% sure.
Hi how do you connect it to an lcd screen
This!
Did you manage to conect itvto a screen?
Can i use with 52v battery and 1500w motor
Yes You can.
What is diffrence between cheepy chines 48v aluminmum controller and sabvaton
hello, does the 150A refers to the output motor current? or is it about the 150A battery drain current?
It is. Phase is 350a
@@bobikleeds so is it about the battery or motor?
@@KiaraNushKatan1 it drains 150 from the battery and sends 350phase to the motor.
@@bobikleeds thank you very much!
My sabvoton has a solid green light. What does this mean. M green light doesn't flash an error code it just stays on
Hi monster bikes UK, I have changed my controller because the old one stopped working, now I get a error (protect contoller) sometimes and losses the throttle, then when I switch it off and then back, its perfectly fine, can you please guide me on what to do next
So there’s no connectors for an alarm like other controllers have…?
Can you do a video on how to connect an alarm to a sabvaton controller and which alarm is plug and play
Try putting a battery in your key fob if you haven't thrown this part out yet.
I have a problem how I know what low speed or hi speed?? I by pass the display I only use the app.. I have 2000w hub and 52v with a 100amp sabvonton controller stuck on 32mph something is wrong it’s slow!
How's it going..
I have a 72/150A controller with the TFT750 display running a 5000W Risun motor..
When I turn the throttle, it goes one speed until half throttle then goes a higher speed, and stays that speed from mid to full throttle..
How do I set it up so the speed increases gradually as I twist the throttle a bit at a time?
I am using the android app on my phone to access the parameters menu..
Thanks..
What you are talking about is flux weaken and that cant be adjusted. You can increase or decrease the flux but it always work the same. Once it is launched at half throttle it goes all the way.
Hi guys I have problems with the svmc72150 is blocked is
What do you mean blocked?
Can you give more information on the single blue hall meter wire? I can't figure out where to wire this.
Hey. It is used for diagnostic tool or i use it with my ant bms display. It is hooked up to the display to show the speed. Otherwise you dont need to plug it in.
Bob Budowniczy thanks so much!
im having problems with connecting usb (usb not recognized - device descriptor request failed) got whole setup used and I'm using different data USB cable. can you help? mowisz po polsku?
Hej. Musisz miec oryginalny kabel. Albo usb bluetooth. Ja sprzedaje na ebayu moduly. Kable tez jakies mam bo buduje ebikes. Dzieki.
@@bobikleeds sprzedaj mi USB kabel i bluetooth module
@@bobikleeds @lexls430 na ig
Hello, I had a sabvoton svmc 72100 and it came with one plug that has both brake disconnects, the throttle, and display and that plugs into a plug on the bike that consolidates those 4 things. I bought a 72150 to replace it and it does not have the plug, it’s the same as yours. Do you know how I can wire it or do I just need the controller with the display prewired?
You need different sabby. This one does not support display
Bob Budowniczy Darn, oh well. Thank you for quick response. I was trying to wire it up without display, I hooked up both pos and neg and connected to the battery. I don’t have an orange wire and I could not get the red light to go on. Any ideas, I’m a newb here and appreciate the help!
Orin Levey hey. What wires do you have on yours? Contact me on messenger. Bob e Bikes
Bob Budowniczy which messenger?
@@bobikleeds do you guys have what’s app?
Can you please help me with this
Good explanation
I have a lot of trouble with English can you explain to me how to connect the regenerative braking function? because I have an Express Accelerator and I also have a sensor that knows when I brake, I have them connected but when I brake nothing happens the accelerator for braking does not work! And on your video I did not understand how to connect it .. you have to connect it to the negative of the controller?
Thank you so much ! 😉
witam . masz sterownik 72150 z płytą z 2019 roku ?
Emil hej. Nie wiem z jaka plyta jest ale mam same odblokowane na moc i na flux. Mozna na flux nawet 150a jechac.
@@bobikleeds no to mamy ten sam model prawdopodobnie . jest kilka modeli i każdy ma inaczej wyprowadzone przewody . np: na lcd ,na alarm itp. PCB w 72150 z 2019 roku ma kilka wolnych pinów do których prawdopodobnie można dodać jakieś funkcje . pytanie tylko skąd dorwać taki schemat z opisem wyjść :J3, J6,J7,J23
I hooked up this controller and my speedometer doesn't show that I'm moving it stays at Zero, the cruise control doesn't work either, i need help how to fix these two problems?
Hello. What speedo do you use? This version of sabvoton does not support any display. On my bikes i use the ant bms display for battery and you can plug in the hall wire from sabvoton to it so it would show speed.
Hi Bob, I have a Sabvoton 72200 flashing the green light. The manual says this is how Sabvoton tells the user there is some kind of problem. Typically during functional operation the green light is off and only the red light is on solid. I don't know how to fix this or how to test this controller. The seller is not responding. Can you help me? I have a voltimeter. Do you know where someone can service these controllers in the USA? Thanks!
My light is solid red is there a problem does it supposed to be green?
Hi did you got fixed?
No tenias esta problema? th-cam.com/video/BOg6KBdBIEs/w-d-xo.html