Another great video Warren always something interesting and new. Hope you have a great weekend. Great looking home shop I hear you about having 2 of everything. It never ends does it.
Real enjoy and learn a lot from your videos. I rebuilt all the cylinders and fresh paint on my 580K last summer. Now new under carriage for the JD 450D, after seeing your video on the small Case dozer I figured mine could not be any worse. Too bad the ceiling in there was so low, it would have been a nice to have the loader all the way up.
Wiggling my way back from Naples Florida in a 81 motor home Chevy every day it’s something different.. I have never had so much trouble in my life it great just to watch your videos to release some stress in beckley West Virginia broke down going to put in alternator number two tomorrow in two days it really suck heading to western Pennsylvania left Thursday no doing so good lol .. thanks for all the effort you put in your videos there great 👍😉!!!!
western truck and tractor repair thanks man it at started in Bradington Florida overheated fixed that at 12:00am then went up the road and slept woke up battery dead ... we have a generator and battery charger with up ... got to starks Florida filled up with gas twenty miles down the road water hit fuel its been a real bitch since changed fuel filler in carb worked good for 20 more miles and bam back fire and dead along I95. Made it to somewhere in Georgia changed fuel filters in line on both tanks full of some kind of black shit damn one tank working good the other not I have been under this thing six times and then Saturday night at 2:00 am battery died no lights got of road stayed the till 11.00 am charged battery got going made it to mount hope West Virginia changed alternator and was good for about haft hour then bam it took a shit now we are in beckley West Virginia waiting for parts store to open and try again it’s not been a good trip at all but like my girlfriend said there isn’t anything I can’t fix I hope so 🤞🤞
remember ih tractors had this same condensation issue with their torque amplifier. clutch pack is above the oil level, lack of oil to clutch it gets red hot & condensation from overuse. on ih they had 3 oil supply tubes to clutch pack, 3 o-rings rot away then clutch starves for oil
Man I don't know how many times I've ran into that same problem I've done a few of those trans all it takes is a little cleaning and and. P.m to keep them going good luck you and yours be safe and take care
I have watched nearly all your video's. I am 48 years old, and farm raised. Worked on a few thing's. And seen them worked on. You are one of the best Mechanics I have ever seen. Not a part's changer. Lot a them these day's. This is a serious request to rebuild a 12v 95 Dodge Motor. Not sure how to go over the details here. I would pay for all part's and shipping coast's. And Pay you whatever you would charge to build it. Again I am not sure how to do this throughU Tube. So a reply to this with some help? Would be greatly appreciated. This is an entirely a legitimate request. Thank you.
important edit.. super magnets inside the case will catch all the rust flakes that come off other parts... hopefully keeping them out of the pump. warren.. do you carry a bead seating air tank on your service truck. you can unscrew the big valve and add a tee with a 1/2 or 3/4" side fitting. on that another tee of the same size.. a globe valve and a quick connect male to hook to your truck air line.. on the other side a 6 foot large diameter hose to your 3/4 and 1" gun connector size.. it becomes a surge tank.. to reduce the pressure drop thru the long reel of hose coming of the truck .. i modded a 5 gallon tank and direct connected with 1/2" hose using 3/8 fittings without any quick connects.. never needed more than a second or two to break loose any big nut ..
Robert here Ryan, I would have to say that those jets are a little heavier than the A10s. I am a railfan so having the tracks that close would not bother me a bit. There is a saying and it goes like this. Pardon our noise but its the sound of freedom.
Hey there. Thanks for the video but i say you using your computer for step by step instructions. If you don't mind want website it that? Thanks and hope all is well. I just subscribed and love your videos
the air inside the case gets hot as the oil thus it as it cools down pulls in moist air through any way it can cool moist air condenses on the metal which cools faster than the oils an other parts water forms depending on the oils type an viscosity it'll either float on top or sink to the bottom rust will form at that point till the oil heats up again an expands shoving the water heavy air out of the case if the vent is open the air can exchange an flow easier thus air wont tend to condense inside the case water will evaporate out
Weakest backhoe out there is the Super M. Being a Utility Contractor we've had many different units and brands on jobs big and small. The back actor is flimsy and hydraulics weak. Prefer John Deere 310 series.
Let me know how well the JD 310 works when you are trying to pick up an 8×20 1inch thick road plate which is 6800 pounds . JD 310 can't do it with front bucket but case 590 super n can
Finally got real close to a piece of my equipment.
I have the phase II 580K.
Always enjoy hanging out with you.
Thank you.
Another great video Warren always something interesting and new. Hope you have a great weekend. Great looking home shop I hear you about having 2 of everything. It never ends does it.
Always interesting Warren your diagnosis on the transmission was spot on 🔧🔩
Real enjoy and learn a lot from your videos. I rebuilt all the cylinders and fresh paint on my 580K last summer. Now new under carriage for the JD 450D, after seeing your video on the small Case dozer I figured mine could not be any worse. Too bad the ceiling in there was so low, it would have been a nice to have the loader all the way up.
Wiggling my way back from Naples Florida in a 81 motor home Chevy every day it’s something different.. I have never had so much trouble in my life it great just to watch your videos to release some stress in beckley West Virginia broke down going to put in alternator number two tomorrow in two days it really suck heading to western Pennsylvania left Thursday no doing so good lol .. thanks for all the effort you put in your videos there great 👍😉!!!!
Tim Heasley Wow , that's not good . I hope you get to Pa. Without any more trouble . Stay safe out there.
western truck and tractor repair thanks man it at started in Bradington Florida overheated fixed that at 12:00am then went up the road and slept woke up battery dead ... we have a generator and battery charger with up ... got to starks Florida filled up with gas twenty miles down the road water hit fuel its been a real bitch since changed fuel filler in carb worked good for 20 more miles and bam back fire and dead along I95. Made it to somewhere in Georgia changed fuel filters in line on both tanks full of some kind of black shit damn one tank working good the other not I have been under this thing six times and then Saturday night at 2:00 am battery died no lights got of road stayed the till 11.00 am charged battery got going made it to mount hope West Virginia changed alternator and was good for about haft hour then bam it took a shit now we are in beckley West Virginia waiting for parts store to open and try again it’s not been a good trip at all but like my girlfriend said there isn’t anything I can’t fix I hope so 🤞🤞
Enjoyed to breakdown.nice to see a professional take time for making video.I will check my vent this week
The sound of freedom.
Nice video , I didn’t realize how big your garage is at home ! That’s nice ! Thanks for sharing bud
Black Smoke Just barely big enough to get a kw t800 in there , did kingpins last week on one .
Glad those extensions came in handy 👍
remember ih tractors had this same condensation issue with their torque amplifier. clutch pack is above the oil level, lack of oil to clutch it gets red hot & condensation from overuse. on ih they had 3 oil supply tubes to clutch pack, 3 o-rings rot away then clutch starves for oil
Good video yet again Warren...At NAS Norfolk and MCAS, Camp Lejune they call that noise the sound of freedom!
Gotta love those hard to get snap rings, can spend hrs trying to get just one off... lol
Great video, cheers :)
Man I don't know how many times I've ran into that same problem I've done a few of those trans all it takes is a little cleaning and and. P.m to keep them going good luck you and yours be safe and take care
Always something interesting.
I have watched nearly all your video's. I am 48 years old, and farm raised. Worked on a few thing's. And seen them worked on. You are one of the best Mechanics I have ever seen. Not a part's changer. Lot a them these day's. This is a serious request to rebuild a 12v 95 Dodge Motor. Not sure how to go over the details here. I would pay for all part's and shipping coast's. And Pay you whatever you would charge to build it. Again I am not sure how to do this throughU Tube. So a reply to this with some help? Would be greatly appreciated. This is an entirely a legitimate request. Thank you.
Meredith Ludwig Sure , I'm interested. Contact me a wlrfixinit@gmail.com
Something so simple now so costly , I have a Case 580 supper K . i better get my ass out there and check mine, Thank's See Ya
important edit.. super magnets inside the case will catch all the rust flakes that come off other parts... hopefully keeping them out of the pump.
warren.. do you carry a bead seating air tank on your service truck. you can unscrew the big valve and add a tee with a 1/2 or 3/4" side fitting. on that another tee of the same size.. a globe valve and a quick connect male to hook to your truck air line.. on the other side a 6 foot large diameter hose to your 3/4 and 1" gun connector size.. it becomes a surge tank.. to reduce the pressure drop thru the long reel of hose coming of the truck .. i modded a 5 gallon tank and direct connected with 1/2" hose using 3/8 fittings without any quick connects.. never needed more than a second or two to break loose any big nut ..
wayne p I made a surge tank like that from a 20lb propane tank, works awesome. I couldn't believe how much the pressure drop can kill an air gun.
G day warren its shane from tasmanian australia you went kinding adout the air traffic
1st time I ever seen you using a creeper to get around on the floor with
How long did it take before you actually started to lower the transmission from the backhoe?
Enjoyed your video. Thanks
About what was the cost of rebuild the trans
YOU are watching da MAN.
god damn those jets are close man
Never been first before, great videos, love to watch, wish I could get my hands dirty
Acidic vapor water in top.
I change my transmission oil every year
It sad we dont see how you pull out the transmission
Do have any videos with CASE 580 SUPER M'S?
What happened to getting a new truck? Did you spend the $5000 you received? Looking forward to your next mechanical video adventure :)
milance17 Oh that money is in the bank , trying to save my money so I can just pay for one .
Was that an A-10 flying over at 33:04? sounded awesome!
Robert here Ryan, I would have to say that those jets are a little heavier than the A10s. I am a railfan so having the tracks that close would not bother me a bit. There is a saying and it goes like this. Pardon our noise but its the sound of freedom.
What brand is that 1" pneumatic gun
Is that a snap on master or epiq series in the back of your shop?
Those sound like A10s. As much as i love the jets i bet living and working right next to them it does get annoying.
Chris Edge I live about 1 kilometre from a RAAF base in Australia and you do get used to it. Not great when it’s at all hours of the night though
Hey there. Thanks for the video but i say you using your computer for step by step instructions. If you don't mind want website it that? Thanks and hope all is well. I just subscribed and love your videos
What happened to that little ride on lawn mower?
Condensation an it is out of the oil?
the air inside the case gets hot as the oil thus it as it cools down pulls in moist air through any way it can cool moist air condenses on the metal which cools faster than the oils an other parts water forms depending on the oils type an viscosity it'll either float on top or sink to the bottom rust will form at that point till the oil heats up again an expands shoving the water heavy air out of the case if the vent is open the air can exchange an flow easier thus air wont tend to condense inside the case water will evaporate out
Is this your shop Warren?
Douglass Wilkin yes
Cantidad de líquido para la transmission
Weakest backhoe out there is the Super M. Being a Utility Contractor we've had many different units and brands on jobs big and small. The back actor is flimsy and hydraulics weak. Prefer John Deere 310 series.
Let me know how well the JD 310 works when you are trying to pick up an 8×20 1inch thick road plate which is 6800 pounds . JD 310 can't do it with front bucket but case 590 super n can
I like JD too . 444 544 644 wheel loaders
I'm being hateful by having capital letters at the end of my sentence.
Tanya jawa
B
?????