ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2014
- On my drivers side door my factory 5X7 speaker was making a vibration sound almost like a piece of plastic was broken off or it had a blown tweeter. I decided to replace both front door speakers with Kenwoood KFC-C5794PS.
SUPPORT: Become a patron for my TH-cam Channel at / fiero880
Want to see a really awesome Fiero Restoration Series on my 1987 Fiero GT check out the links below.
Fiero Restoration Part 6 • Part 6 1987 Fiero GT P...
Fiero Restoration Part 5 • Part 5 1987 Fiero GT P...
Fiero Restoration Part 4 • Part 4 1987 Fiero GT P...
Fiero Restoration Part 3 • Part 3 1987 Fiero GT P...
Fiero Restoration Part 2 • Part 2 1987 Fiero GT P...
Fiero Restoration Part 1 • 1987 Fiero GT Project ... - ยานยนต์และพาหนะ
Watched your video and did my 14 Gt with no problems at all. Thanks for taking the time and effort in making this video.
Thank you for taking the time to make that video! My 2013 GT has a rattle in the driver side door that I've finally had enough of. A little know how before I tear into it is going to save me some frustration!
Very welcome.
Thank you so much for this video!! I had no idea what i was doing and your step by step was perfect, i even went out and bought a soldering gun and learned how to solder from this. Sparked my ambition to be more creative with solutions to other things.
Good video, i hope you make a video on how to replace front door subs!!!
Hey Guy! I owned a car stereo shop. You did a great job. They make a adapter for 5.25 also. I ended up running boston pros, replaced that crappy 8 inch woofer with boston 6.5 pros with a custom mdf bracket, and replaced the rears with boston pros also...The shaker system sucks, Again, Great job on showing how to correctly replace and upgrade those paper cone speakers!! Maybe Ford will realize we like our music with our muscle.
Thank you!!! I agree. Still cannot believe the speakers that came out of there.
You are awesome! Thanks for taking the time to make this!
Thanks for the video. Replaced speakers in my 2010 pony in about 2 hours thanks to you. Only comment I have is I didn't have to disconnect the door handle, there was enough room to remove the speaker without totally removing the door frame. Great job!!!!
Steve, Thank you
What size is the speaker
Thanks for the video. I have a 2014 GT Premium, who has a different speaker and a tweeter of very crappy quality (made in China, 20 Watt and 2 Ohm). I just replaced the full item with a new speaker like in your video which fits into the hole and drilled three new holes to attach it. It worked and sounds much better. I will probably replace also the second one on the driver side.
A lot of good details, I'll be referencing this video when I go to put my kickers in the doors.
Very helpful video. Replaced these on my 2011 GT Premium as well. I did weigh the old vs new ones, since you commented on how light & wimpy the OEM ones were. OEM ones weigh 12.6 oz, vs the new ones (Infinity 8602cf), 28.4 oz. Huge difference, mostly due to the magnet. And yes, they sound a lot better than the original ones. Thanks again
Great video man very detail.
Great Idea! I'm gonna add to my 2014 Wrangler. Great videos, keep up the good work.
Awesome video man! Tons of help thank you!
Anytime!!! Thank you
I enjoyed your clip.
Thanks for the vid!!!
I'm not a big fan of Kenwood speakers($49 a pair, you get that, I know), but you're right on the stock speakers in these cars. Not as bad as the pre-2000 cars, where the driver magnet was the diameter of a toilet paper tube, but they're still pretty bad. Nice job on the wire harness solder, by the way!
Cool video
Thx for the good advice! It' is easier to put connectors to the wires of the stock speaker connector without soldering. You don't have to remove the door panel totally out of the door as well...
GREAT VIDEO thanks I have a 2010 mustang 4.0 convertible. I was thinking about installing an amp on my rear speakers
Great job
Thank you !!
Did you have to or install an amplifier?
Question for you, I have the same car with the factory Shaker 500 system. Just wondering why you don’t seem to have any bottom speakers along with top( that you replaced) I have two speakers per door...1st time I noticed that when looking up videos...
You'll have the 6x8s up top and the other ones are 8in subs rated at 1.2ohm if im correct
Can a 6.5” speakers fit there?
just to let everyone know here, if you have a gt premuim, the speaker is a 5.5 inch with a tweeter separate in its own plastic housing, so youll need an adapter or to just replace the 5.5 in the center.
bass mechanik CD...nice...
Lol Sort of old school.
I'm going to mod front speakers in my 2013 V6 premium and Your video is gonna make it it SO MUCH easier - thanks! :) But there's one problem I found out when watching Your video - the sticker on Your stock speakers says "4 Ohm" (10:19). And speakers I bought are 2 Ohms - I have not yet dismantled my door panels, so not sure which I really do have, but have read that stock speakers should be 2 Ohms. Can anyone tell me which impedance are standard front door speakers?
There were different speakers on the stock non GT models if I am correct. Check Crutchfield and it should tell you after inputting your cars information.
nice job...did you replace the base as well or just the 5x8's?
cheers
Only the 5X8's
There's a service bulletin on the Mustang. On some cars the window control bezels rattle and can make the speakers sound broken. I have the problem on my 2005 ... resting my finger on the window control bezel stops the sound.
cdn.lrsstatic.com/downloads/tsb05-14/tsb07-17-06.pdf
Can anybody Tell me if there is a plug and play 8" Sub for the Door.
Just for information, my Pony 2014 Us Import Have a 5.25" full range and a tweeter in the Upper Side and not like in the Video.
Anyway Thanks fo the informative Video 🙏
Awesome Video! Extremely helpful...excuse my ignorance but whats the name of the tool you used to pop out some of the parts in the door panel?
OH wow hahaha thats perfect thanks man!
I have a 2011 mustang gt what size is the front and rear
Did all the same stuff but my door panel wont come off. Something inside still holding on for some reason. Was just trying to replace speakers. Cant get the door panels off. Lifted up and out and it wont pop off.
Just remember you have bolt all along the bottom side of the door and up the sides, the interior handle area and the inner pull handle area. It could be someone may have previously removed the panel in the past and may have put different secure tabs holding the door panel to the door. I dunno what else to add.
Nice vid, sir! Do you have an approximate time on how long it took to do this?
About an hour.
What is that round part below the actual speaker on the door panel?? On the door itself there is no speaker.
On the GT Premiums you have the top speaker and then below that is the factory sub woofer.
heay my passenger sub is blown and i was looking to replace it with a different sub, i dont know if you looked at yours but do you know how deep they are? (like how long) other than that i know they are 8" and 2 ohm dual voice coils and was thinking about going with Rockford Fosgate P3SD2-8 as a replacement.
gotta do this! mine suck
2011 base
The sound will be a huge difference.
Awesome job bro thank you for the time you took to make this video and help everyone years later👍
Repent of your sins and trust in Christ alone for eternal life and salvation🙏 He was crucified, buried, and raised on the 3rd day for all the sins of those who will repent and trust in Him alone!