Most important thing to know here is to unlock your remote prior to doing this! Take off the back cover, hold the lock button beside the battery until you see a U flashing on the remote. Now you can adjust/reset limits.
I’m in the same boat motor battery died recharged it overnight and now the setting are all out of wack and can’t get it to reset the programming to set new top and bottom I have been trying for the last 2h.
help please. I have programmed these before, for clients, but my personal shades stopped working. I have factory reset, but cannot get the remote to pair to the motor. Nothing happens when I push the stop button to pair the motor to the remote and the remote is unlocked. The motor is charged.....
This remote is not the paradigm flush wall switch and does not help with programming that remote. I can’t find any videos from Rollease for that remote. And the instruction manual for pairing the remote is not helpful.
Most important thing to know here is to unlock your remote prior to doing this! Take off the back cover, hold the lock button beside the battery until you see a U flashing on the remote. Now you can adjust/reset limits.
1000 likes for this comment! Thank you! I was about to throw my remote out the window!
For double door blinds can you move blinds up & down seperately ? My blinds only do both .
Greetings, I just replaced button battery in my remote. Pressing the stop button does not make the motor jog twice. Please advice AS
I’m in the same boat motor battery died recharged it overnight and now the setting are all out of wack and can’t get it to reset the programming to set new top and bottom I have been trying for the last 2h.
@@remix305ttv8 have you tried pairing it again?
switch the channel to #1 on the remote then pair it again.
Excelente video gracias desde Panamá
Perfect explanation. Thanks!
Excellent. But I can't seem to remove the shade from the clutch side, in order to replace the clutch.
Hi! Can I control the remote using an app?
My remote just flashes a blue light when I press any button. What can I do for that?
help please. I have programmed these before, for clients, but my personal shades stopped working. I have factory reset, but cannot get the remote to pair to the motor. Nothing happens when I push the stop button to pair the motor to the remote and the remote is unlocked. The motor is charged.....
My shade s are stuck remote number goes to # 18 when trying to put them up..?
What to do
i tried to pair the remote, but my motor only beeps and does not jog and I am not able to pair it. Any suggestions pls?
Thank you! Big help!
Awesome - thanks
This remote is not the paradigm flush wall switch and does not help with programming that remote. I can’t find any videos from Rollease for that remote. And the instruction manual for pairing the remote is not helpful.
Ilove yuo