Maytech MTO6374-150-WPC 6374 Waterproof Motor for Foil Boost Efoil
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Maytech MTO6374-150-WPC 6374 Waterproof Motor for Foil Boost Efoil
6374 Waterproof Motor/ESC/Remote kit:
Aliexpress: www.aliexpress...
Alibaba: www.alibaba.co...
Propeller: www.aliexpress...
MTO6374-150-WPC 6374 Waterproof motor: www.alibaba.co...
Recommended MTSPF60100 100A VESC6 ESC: www.alibaba.co...
Maytech Waterproof Remote MTSKR1905WF: www.alibaba.co...
---------------------------------------------------------------------------------------------------------------------------
Follow us on social media:
Instagram: / eileenmaytech
Facebook: / caiyu.lu.77
Email: eileen@maytech.cn
--------------------------------------------------------------------------------------------------------------------------
#Maytech #FoilBoost #efoil #Waterproofmotor #waterproof6374motor #waterproofoutrunnermotor #bldcmotor #efoil #esurf #esup #unerwaterdrone #underwaterthruster #underwaterrobot #rov #poolcleanerrobot #roboticpoolcleaner #poolcleaners #VESC100A #VESCspeedcontroller #vesctool
How the motor is attached to the mast? Where can I get the clamp?
Do ypu know the power consumption with 4s and 6s lipo,
Is there a voltage/amperage/throttle/thrust table? I would like to know what happens with 12 volt batteries. thank you so much
we didn't test the kit with 12V for efoil before. Usually customers use 24-48V.
Whats the setting for the most power for 8s?
what BMS do you recommend to talk to the MTSPF60100 ? Want to make sure it shutdown if battery is low.
would you send your setup details (motor/ESC/battery voltage) to my email eileen@maytech.cn? So I can check and give recommendations.
Did you need to seal the motor? Or maytech waterproofing is fine?
Maytech waterproof 6374 motor is already waterproof motor :)
How much volt and speed Do you have tested?
Hi, speed also depens on your battery, board shape, mast/wing shape, load, etc.
arent brushless motors waterproof anyway?
yes, it's brushless waterproof motor
Yes they are... until they aren't.
You're basically thinking of FPV drone motors, and most any brushless motor will not be harmed initially by getting wet.
The wires in the brushless motor are coated with a thin enamel so electrical shorts don't happen in the motor windings, and that's good enough to hold back water too, but with enough gunk getting into the motor from not being fully sealed, the protective wire enamel can deteriorate until it's weak enough to short out the motor windings.
With a motor that's actually built to be waterproof, there are seals that prevent water and dust from getting to there motor windings at all, leading to a much longer life for the motor in harsh conditions.
@@Chris-oj7ro ahh
i guess thats a plausable explanation
also your motor is in the water all the time so it makes much more sense to think about waterproofing than on a fpv drone motor where you kinda want to stay away from water anyway :D