Nice video, picking some up in a couple of days. But plan on drilling through metal where the mounding goes over to hide the wire. Thanks for the information about the rear wires not being long enough and where to run the wires to the dope lights.
Can you have a more detailed and clear picture of the fuse box area and where the wires go in exactly. I am not good with electricals, so I want to be sure when i do it. Thanks! :D
how do you disassemble the connection from the front door sill so you can wire the back door sill to it. you talk about it at 12:35, but just show the finished product. I have the same type of connections for my corolla but am stuck.
You take a small flat head screw driver and push the 2 metal slot and you should be able to pull it apart. However, I remember it was difficult to combine the 2 positive and 2 negative wires back into the slot. You can just cut the connector and just solder/spice all wires together and just bypass the connector all together.
DIY: Car Modz ok, i don't have the tools to solder so i will just use that connector. Also, At the end to complete the connection you tap the wire into the pink and blue wires. I have a 2014 corolla so obviously the wires are different. Do you know which colored wires I should tap into. I even tried calling a couple toyota dealers and they have no idea how. Cant find any info for this on the internet. Or do you have advice on how to locate the correct wires?
I have a link to the guy in Japan I think that has done the door handles. I will try and take some as well. I just ordered the LEDs. I did the winkers in my mirrors a couple years ago. Again I have the link.
Thanks and post up pics on the forum when you do the door handles. I've been thinking about doing that as well. My next project will be adding leds for the side mirrors.
Great vid. Ill be doing this to my fit soon (I hope) Ive been looking on Ebay but cant find the door sil. Any chance you could post a link to where you bought it?
Hello good day! Mu could say as empalmas cable behind the front? There is a cut in the video and do not know much about electronics, it can be a kind of crocodile? Regards, and thank you very much!
Don't mind me saying so, but you should invest on a head Camera. It will really work well for you. I'm installing some sills on my CHevy HHr 2008LT. Can't seem to find a power source that will turn on/off when the door closes. What should you suggest?
When the key is swithced off, will the light go off also even the doors are open? Mine is exactly like that , and i worry becauase the light wont go off even i press the door sensor when key is off. But when the key is on, the light functions properly, pls help me.
Levie Rodriguez the light is suppose to stay on. It will turn off when you have all the doors closed and lock the car or at the same time the dome light fades out.
Hey,man great video really like the way u explain everything I just needed help with the end it was so dark in video were you tap the two wire to please let me know I really appreciate it,dave
check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located.
Hi I really need yr help were to connect the post wire I have a honda hrv 18' it probably the same please get back to me I really appreciate it thanks Dave
check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located. I will also send you a picture to your inbox.
+Francis Joseph Sino We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore
@@DIYCarModz Wow! Good for you! You do a great job of explaining these DIY's for us plebeians! I just ordered door sill plates for my 2018 CRV and I fucked them up. No instructions. I installed them wrong. I may need to reach out to you as they need to be replaced!
Go to my youtube channel th-cam.com/users/diycarmodz and click the magnifying glass next to the "about" tab and search for "honda fit" there are many videos that shows you how to wire them up. th-cam.com/video/igFMlrqTV4U/w-d-xo.html
theodore, hi there, got my door sills for my rogue 2016, dont know where to connect them, so you're saying it is much easier to connect them on door switches? and will lite only the door you open right?thanks nando
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore
+HONDA FIT We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus
Sometimes the obvious solution is not always thought about until it's too late. I agree the door button would have been much quicker, it's the way I would do it.
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore
![How To Install Dynamic LED Door Sill [Step By Step Installation Guide]](http://i.ytimg.com/vi/J4Vw-J6ok9k/mqdefault.jpg)
Nice video, picking some up in a couple of days. But plan on drilling through metal where the mounding goes over to hide the wire. Thanks for the information about the rear wires not being long enough and where to run the wires to the dope lights.
Can you have a more detailed and clear picture of the fuse box area and where the wires go in exactly. I am not good with electricals, so I want to be sure when i do it. Thanks! :D
Thanks for the DIY. Well done. I have Honda sills so will not be doing this but I am doing my door handles so this does help.
I purchased the door sill on eBay. They do make them for all makes and model. Just search on their for door sill led for your car.
Do they still light up all these years later
how do you disassemble the connection from the front door sill so you can wire the back door sill to it. you talk about it at 12:35, but just show the finished product. I have the same type of connections for my corolla but am stuck.
You take a small flat head screw driver and push the 2 metal slot and you should be able to pull it apart. However, I remember it was difficult to combine the 2 positive and 2 negative wires back into the slot. You can just cut the connector and just solder/spice all wires together and just bypass the connector all together.
DIY: Car Modz ok, i don't have the tools to solder so i will just use that connector. Also, At the end to complete the connection you tap the wire into the pink and blue wires. I have a 2014 corolla so obviously the wires are different. Do you know which colored wires I should tap into. I even tried calling a couple toyota dealers and they have no idea how. Cant find any info for this on the internet. Or do you have advice on how to locate the correct wires?
I have a link to the guy in Japan I think that has done the door handles. I will try and take some as well. I just ordered the LEDs.
I did the winkers in my mirrors a couple years ago. Again I have the link.
i have these and i have one question, can you clarify better were to and how to tap the wires into the fuse box?
Hi..do u know how to install the promotion LED door catch plate for hyundai santa fe 2012 dm?or do you have a video?kindly share.tnx
Hardcore detailing... Thanks for the efforts u gave to make the video! Appreciate it :)
Thanks and post up pics on the forum when you do the door handles. I've been thinking about doing that as well.
My next project will be adding leds for the side mirrors.
hey. nice vid. do you have HID installation for the fit ? it will be great if u made a video of it.
After installed all this will effect the alarm light
not at all.
On ending you skip the how to connect wire in fuse box
Where did you connect the live wire?
There is a pink and blue wire near the end of the video that he tapped into. Pink being positive(red) and blue being ground .
where do i connect the wires the positive and negative in hinda civic fd TIA
Thanks for the video. It sure is a lot of effort.
what site you get those
hi, sorry , i wanna know where can i buy that blue socket?
Great vid. Ill be doing this to my fit soon (I hope)
Ive been looking on Ebay but cant find the door sil. Any chance you could post a link to where you bought it?
Hello good day! Mu could say as empalmas cable behind the front? There is a cut in the video and do not know much about electronics, it can be a kind of crocodile? Regards, and thank you very much!
Good job thanks for the detailed video, what I was wanting to know where did you pick up the door sills and do they carry other models?
Don't mind me saying so, but you should invest on a head Camera. It will really work well for you. I'm installing some sills on my CHevy HHr 2008LT. Can't seem to find a power source that will turn on/off when the door closes. What should you suggest?
where can i get the long wire and how can i know its the right one any tips????
When the key is swithced off, will the light go off also even the doors are open? Mine is exactly like that , and i worry becauase the light wont go off even i press the door sensor when key is off. But when the key is on, the light functions properly, pls help me.
Levie Rodriguez the light is suppose to stay on. It will turn off when you have all the doors closed and lock the car or at the same time the dome light fades out.
Hey I was really hoping to hear from you were you tapped the pos n neg wires please let me know thanks Dave
I'll have a video up today
those scuff lights fits with the Honda FIT 2011 model ?
Chandula Sliit Yes, the exact same ones will fit your car.
Thank you very much for the detailed video.
where Can i connect my door sill for civic SI 2015 4 doors?
Hello, is the negative side (black wire) of the sill should be grounded to the car also connected to the blue wire in fuse box at the same time?
Power and Ground goes tot he 2 wires I explain in this video. I believe the wires I'm tapping are negative switched.
Where do i get the power supply? The fuse? Which fuse is it?
check out his video: The wires are tapped to the dome light circuit.LED Door Sill power hookup Part 1
DIY: Car Modz
can u tell me how to install honda vezel door sill? plz
Hey,man great video really like the way u explain everything I just needed help with the end it was so dark in video were you tap the two wire to please let me know I really appreciate it,dave
check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located.
Hi I really need yr help were to connect the post wire I have a honda hrv 18' it probably the same please get back to me I really appreciate it thanks Dave
Here is the instructions for the HRV: www.handa-accessories.com/hrv/doorsill.pdf
Excelente video. lo instale y quedaron bien
18:04 “the fit will be lit” indeed it will.
check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located.
I will also send you a picture to your inbox.
Hi where did you get that door sill i also have a honda fit, how much? Thank you
eBay. search for Honda Fit door sill. It was around $50.
+Francis Joseph Sino We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus
can we connect this to door warning sensor that is situated on every door.?
Yes, each door sensor will have 1 wire. You just connect that to the positive wire and ground the other wire.
thanks mate.
I just bought some door sills for my 2018 Honda Fit. The LED looks cool, but I decided to get the non-LED door sills.
Hi, do you know how to install the wiring for the 2015 Fit? I can't seem to find any available slot.
+Richard Dean th-cam.com/video/dH07Tce7sgE/w-d-xo.htmlm7s
Thanks a lot..
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore
Did you get rid of your Accord?
I have '13 Accord '12 Fit and '18 Civic
@@DIYCarModz Wow! Good for you! You do a great job of explaining these DIY's for us plebeians! I just ordered door sill plates for my 2018 CRV and I fucked them up. No instructions. I installed them wrong. I may need to reach out to you as they need to be replaced!
where can i get this stuff? can u send me the link? thx
Thanks for the detailed video
Hit me up if you run into problems installing it.
DIY: Car Modz the wire , where u connect it ?
Thx man....very good video
Does it turn off when u close the door and on when u open
Yes, I'll get you a video later tonight.
You did not talk about how to connect wires to the main line.
Go to my youtube channel th-cam.com/users/diycarmodz and click the magnifying glass next to the "about" tab and search for "honda fit" there are many videos that shows you how to wire them up. th-cam.com/video/igFMlrqTV4U/w-d-xo.html
+DIY: Car Modz : is it turned off when you close the door ? or it's stay on.
It is on the same circuit/timer as the dome light.
theodore, hi there, got my door sills for my rogue 2016, dont know where to connect them, so you're saying it is much easier to connect them on door switches? and will lite only the door you open right?thanks nando
theodore, thanks for your reply ,yes,i see only one wire,i guess its a power, but how to or where should i connect the ground wire?
Do you think these will work for the 2007 Fit Sport?
+Fernando I'm not sure. The box says for GE8. which is not the 1st gen fit
Where did u get them??
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore
+HONDA FIT We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus
What carpet are you use
I'm using weathertech digifloor mats up front and stock ones in the back seat and oem trunk liner
so you just opted the most important part of connecting the wires, I came here to learn that only.
Ali Majaz VLOGS ikr. Kinda the whole point.
Muito trabalhoso , gostaria de colocar no meu Golf 🙂
Nice
never mind. Found it. Had to go over to ebay.com was on .ca
Thanks for the great video.
You went to a awful lot of trouble just to fit those, all you had to do was wire them to the door button that's in the door sill when you open it.
Can u teach me master how?
Sometimes the obvious solution is not always thought about until it's too late. I agree the door button would have been much quicker, it's the way I would do it.
That works the opposite way round on mine, I've tried that place before
pe benda la ko tunjuk ni..betul2 la tunjuk mcm ne nak sambung wire tu
_
You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore