Very well done video review. As the owner of the same boat for 2 years now (2018 model), I agree with everything you said. It irks me that Mako has had 2 years to fix the livewell design and they haven't done it yet. I took mine to Bass Pro to fix it. They said there was nothing wrong with it. I said there was something wrong. They didn't have a way to put the boat in the water to test it or let me prove to them that there is a problem. The service manager told me to put the boat in gear moving forward before turning on the pump. That doesn't work. Wasted trip to fix something that should be covered under warranty. It's still broke 2 years later. I have the 60 horse, a 9" Humminbird Helix Mega side/down scan that I love. Same Minn Kota Terrova that I love. Rarely use my anchor anymore.....YAY! Spot Lock is the bomb. Love the boat and it's stability, hate the livewell.
I agree with you on the console tray. As far as instruments go, they’re not cheap but perfectly available. Such as: water pressure gauge, volts. Yes, you can cut an access hole in the deck for fuel tank filling. Did it. I also added a fuel gauge. I recommend using clear rollers for your trailer. They are non marring. I am also a big fan of “boat buckles” as a replacement to the standard transom tie downs. I’ve used them for years.
Great review! I have a Pro Skiff 17 and some upgrades that I had done was added a flush mount Nav light, added a flush mount cleat in front of Nav light, Swing bar with rod holders at Capt seat and the one thing I feel ALL south TX boaters should have is a Bimini Top! Just some ideas! Keep them lines tight!
We Go Fishing If your only fishing 2 people, not at all. It covers the center council and leaves plenty of fishing room on the front and back desks. Real nice to have something to get out of the heat for a little while. I also added 2 rocket launcher style rod holders on the swing bar, game changer for sure.
Hey man, thank you so much and I am glad it was helpful. All in all it is a pretty great boat just be sure you get the right size for you and the power.
@@WeGoFishing I’m up in sw Oklahoma and mostly fish smaller lakes 2500-5000acres so I plan on the MPS15cc with the 60hp. Just waiting to hear back from Mako.
Spare tire is a must have and a great upgrade. One of things I used to carry when I had a boat was the hub & bearings. I have been stranded on the side of the road with a burned out hub. After that I started carrying a spare. Great video.
Trying to talk my wife into letting me buy a boat so we can get on the intercoastal here in NC. I told her it was more for our Labrador than me lol. Wish me luck
Excellent review, two thumbs up 👍 If I may ask you please: how many feet are needed in the garage to place that boat like you have it. Thank you so much 😊
Thank you so much and I am glad it was helpful! I would allow 21" for clearance. 20'6" from tongue to prop in the garage. You can save some space if you get a folding tongue. They are pretty easy to install.
Hi… first, thanks for you sharing your experience, very objective and very helpful… since you’re located at South Texas, I guess you spend quite time fishing in-bay, have you regretted not getting the 16 or 17 feet boat instead of the 15’ ? Have the 15’ been enough for your needs?
Hey man! Thanks for watching! We do inshore fishing, especially the marshes and flats. If you can afford it, the 17 provides a little more space, but it really isn’t that much over all. You don’t net that much more space on the 17. It really depends on how many people you take with you. 2-3 people works fine. Any more than that and it get small quick.
I have the same live well issue. My fix which still sucks is to keep a 2-3 foot piece of tubing of similar diameter as the output sprayer. Unscrew the nozzle all the way and hold the tubing on the output and blow the water out of the line until you feel/hear it clear. Then it will work. Sometimes I have to do this every time we move and sometimes it still works it’s definitely an issue with these Makos.
Going out on a limb but the things u hate or dislike about the boat other than the live well issue may be some of the things that allow you to like the price of the boat. Great review. Thanx for taking time out from boating to do the review.
I think you may have a point. Price sells! It really is a great boat for what we use it for. Nothing is perfect, but it crosses a lot of t’s. Thanks for watching!
Great video! We’ve had our 2020 pro skiff 15 for a few months now. Good to see someone else with the same experiences and opinions. I too hate the trailer wheel on the bow, and our live well doesn’t work at all. Brand new boat, live well doesn’t work.... good job mako lol
Right...seems like a common problem. Someone told me to bug the boat dealer and then Mako will eventually replace the motor which *may* fix the problem.
Thank you for watching and for the ideas! I did install rod holders on the front of the boat and I tried ones on the rear casting deck, but I felt like they kept getting in the way. I am thinking of installing one or two on the ice chest seat.
I think it is the 56” length (I am saying that from memory). The dual batteries are in the front compartment. There is plenty of room in there for storage.
@@WeGoFishing awesome and thank you. I have the same trolling motor but they come in 3 sizes. Mine is 54", perhaps yours too. Thanks for taking the time to answer my questions.
We have a couple of options for attaching an anchor. In shallow water, we use a stick pole and it has increased over opportunities dramatically. In deep water, we use the trolling motor on an anchor function. In a pinch, you could use the hook on the front of the boat for an anchor line, but there is no middle cleat for a proper anchor. Hope this helps. Tight lines!
Hey man, thanks for watching! I used the skiff in lakes bass and crappie fishing. I don’t know if a chair on the front casting platform would work. I don’t know the answer to your question. Maybe a tech at bass pro or a dealer would be better to answer that question. Tight lines!
Put a strap around the gas can so you can pull it out when necessary. Some automotive vinyl or rubber edge molding on the lip of the back deck to keep from scraping you arms when pulling out the gas tank. Bigger wheel at the bow will prevent it from hanging up when launching the boat. Air lock on your livewell fill hose, had the same problem with mine, you can't have any dips or low spots in the hose run from the pump to the livewell that will trap water, kind of like the u-trap on your sink drain. Otherwise, Nice boat, almost bought one, but decided on a bigger boat and different brand.
Awesome video! You happened to know the top speed for the 45hp motor? Also saw that there was some scratches on the bottom and lower side, so how is tue paint and gel coat holding up? Thanks
I cant tell entirely by the video but it looks like the aft deck over the gas tank should be lift able to retrieve the gas tank as it is not molded into the hull perhaps you could check underneath for possible releases so it can be lifted, Robalo does the same to their fuel tanks but they are removeable. If it is not moveable perhaps drilling a flush mount fuel filler cap over the tank and attaching with a tube between the 2 would work.
I will check again, but I didn't see any the first time. That would be a facepalm moment. lol and your second suggestion is an option I am looking into.
I added a swing away boat ladder to my pro skiff. We found it very difficult to board back on the boat in deep water so for safety reasons look at installing a ladder. Good video!
Put some bungee cords and some kayak loops on the tray to prevent items from flying out. As for the gas can, perhaps you can put some pull-out rails on the floor to slide to tank out, but you have the lip problem..
@@WeGoFishing Well that stinks, do you think it's worth the price still? I'm looking at a new boat b/c I cant get my project boat working. (89 McKee Craft Aruba 60 hp 1989 Mercury)
I have a 2013 MPS 17" and the live bait has always had the vacuum lock problem. They should of had it fixed by now. The bump roller looks to small I would install a larger non marking one it should roll off easier. Also I had a problem with the short guide poles going under the side overhang trim. So I bought a 10' schedule 40 pvc pipe cut in half to have 5 ft poles. I like the ratchet straps i'm gonna get a pair. I agree with you on the Texas heat whatever is easier and faster is the way to go. Congrats on the boat and happy fishing.
I would have thought they would have fixed it too. It is a common complaint. Agreed on the roller. The ratchet straps are AWESOME! I absolutely love them. Thank you for watching and tight lines!
What do you think about a used 2016 Mako pro skiff 16 for $14,500? I'm going to look at one but don't know much about them. I saw this review and you did great. I've always had V hull boat but I also was living in the Keys here in FL. Now Im mostly around lakes. Is the height of the sides of this boat safe? Do they come w/a bilge?
Seems a little high for that year, but I am not a boat market expert. They do have a bilge that is switch operated. In my opinion, they are solid boats and we enjoyed ours very much! Thank you and tight lines!
@WeGoFishing Ended up getting it for $13,500. He had lots of extras on it including a outboard mount that you can raise & lower the motor w/o using the tilt & trim.
What a great review of this boat! We have considered buying a boat in the future, and this is some great insight into what we could consider and watch out for when considering a purchase. Cheers!
I like the style of these boats because they're simple, affordable, and stable. That front reminds me of my old 1970s Tri-hull and I loved that boat. I know it isn't designed to be a pleasure boat, but it looks like you could swim from it and maybe pull a tube behind it. Have you boarded the boat from the water and how hard is it to pull yourself up the side or back?
I needed a swing tongue on the trailer in order to have enough room to walk past the rear of my boat (same boat) when pulled straight in. I have my water heater and a chest freezer behind the boat, though. If you have nothing on the rear garage wall, you may be ok without the swing tongue or if you put the boat in at an angle.
@@nagamus Yes.....motor down gains space. I always drop mine after pushing it in. I put a piece of duct tape on the garage floor where the tongue wheel is supposed to stop so I don't go too far before dropping the motor. Just remember to raise it and put the transom saver back before you pull out next trip! My dealer charged $250 to install a swing hinge. It takes sawing apart and drilling 16 holes in the tongue, so I said yea.....go ahead and do it. You got my wallet for the boat, anyway!
Ok so we bought a 2019 Tracker V175 combo brand new in Illinois and the dealer told us that if we moved to Florida, it would be "great in saltwater". Come to find out, it's probably not best....definitely either need to replace the trailer or lose our butts by trading or just selling outright to someone else. What are your thoughts? We are also a family of five. I'm actually shocked that this boat provided enough space for your entire family.
Wow! Sorry about your experience. I don't know about the Tracker, but I depending on your budget I would take a look at the LTS series from Mako. We have enjoyed the Pro Skiff and it can hold 5 people or 850 lbs. As our kids get older (they are smaller now), I will need to upgrade. So many factors to consider.
So I had bought me a 2020 pro 15 skiff I also have problems with the life well If you don’t mind me asking What size is the tires on these and also where can I find a trolling motor like yours at because I want a good one that will last a long time I love my boat and I think I made a good purchase for my first boat I would recommend it to anyone For there first boat
The trolling motor is a Minn Kota Terranova IPilot. I purchased our and had it installed by the dealership. The tire size is ST185180D13. I agree. It is great for the first time boat owner! Thanks for watching!
Awesome review. Really looking at this boat. Issue is garage space with washer and dryer in garage I need to stop at 17ft. I saw Fulton makes a trailer swivel or swing, looks like easy install. I think Mako puts the same trailer on the 15/17/19ft? Curious as I cannot find the info the distance from say propeller to where the front of trailer could potentially swivel, around where you have the spare. Guessing yours is about 21ft as is right now? I hear good things about the fish finder you got, Think I will do the same. We are in skinny water also but just north of Tampa.
Did you ever figure this out @troy Miller? I’m in the same position as you. Length is the issue for my garage and I’m curious the length with the swing tongue
It depends on how much the kids weigh. I put my oldest two on the back seated on the rear casting deck. Of course, feet in the boat. My youngest sits with my wife on the front seat or by me on the cooler. It really is about balancing your weight. My kids are small so it doesn't cause a big issue. When they get bigger, we will see :)
In my opinion, I think that if you have several people on the pro skiff 15 (and I don't believe there should ever be more than 2 or three adults on such a craft)... while the craft is underway, children should be seated in the front of the vessel facing the rear. Spacing the weight evenly across the bow. (I wouldn't take any guest that wasn't an adult). To each their own. I only want to make sure that safety precautions are taken and that people do things at their own risk. The difference between a great day on the water and a tragic accident is the vigilance of all on the vessel. Please be careful.
Great review man!! my dad and I going next week to get the 17 , are the payments to high if you don’t mind me asking? If paid in full then avoid my question lol
We have thought about putting one on several time, but were concerned it would inhibit the fishing. If anyone has any experience with this, please let us know!
It does pretty good at staying dry. Honestly, I don't go out if the wind is over 15 mph, but it handles chop pretty well for its size. Thanks for watching!
Hello, we live in Dripping Springs, TX and go to Rockport/Port A a bunch to fish. I’m looking for something like this and am curious how well you hold up in bays? Great video. Thanks.
Awesome video looking to get into one of these. How’s the bottom of the hull holding up? Looks like a few scratches in the front. Possibly from oysters?
It does have a few scratches - mainly from getting too close to the spoil islands lol. We use the boat a lot and it is looks as good as new…minus the few scratches. 😎
Hello, I just picked up the same boat. How well does the transducer work where you have it mounted? I am going to mount one to a stern saver pad in the same area. Thanks!
got a 2019 pro 15,,,,,the very drain hole plug....its lower than the bilge pump......have to drain it everytime i go out fishing...seems to be a void area under boat hull......guess water getting down there fro front hatches....gonna install a t top soon....plus no anchor guess i get pole anchor its better....anchor area hatch is a joke too.
I hadn't noticed that on the 2020...I will have to check that, but I pull my plugs every time. I rarely if ever have water that drains out. I have thought about a t-top, but I would have to make it removable. Let me know how that goes. Yes, there is no anchor cleat, but I have the I-pilot. I have thought maybe pole anchors especially because we fish shallow areas. I put a cast net in my anchor hatch lol
@@WeGoFishing Nice I didn't think of that! I didn't want to put it up from because of cast nets and wasn't sure if back deck near the motor would get interference.
@@WeGoFishing thnkz bud ya sux when took me years to save up for a gheenoe with a 20 hp tiller new only had it for a week and someone stole it rite outta my side of house its still hard to swallow especially my boys loved goin fishing on it so for the meantime we have couple kayaks we take out so one day we will get a nice family boat like yours could I finance something like this whats the price on something like you have we love your boat
Great job with the review; I've been looking at this boat for a long time and have hesitated with the purchase because I didn't know how stable it would handle multiple people on the boat and I've seen others say upgrade to the 17'. I have limited space in my garage too and it looks like it fits in your garage just fine without having to angle it in. Thanks again for the detailed review; I hit that red button too. #getoutthehousegofish
Thank you! It really is a stable boat. Weight distribution is always important, but the platform is very stable. The 17' has a couple of features the 15' doesn't have, but you don't gain that much fishing room. Welcome to the channel!
@@WeGoFishing We ordered our Pro Skiff 15 today :-) Only thing we did different is we upgraded to the 60hp but I pretty much got the same upgrades as you got. I just wish it came with a live well in the back like the 17 but no big deal. I didn't see in the video where you talked about the steering upgrade but I chose to upgrade to the hydraulic steering because I saw in another video someone was complaining on how hard the steering felt sometimes. They said it would take at least 6 weeks before it arrived after ordering. I also wanted the Aqua green colored decal but was not going to pay that amount of money for a sticker. You would think it would be a free option but no.
I haven't found one I like either. Our local store has a couple, but I don't like them. Planning a coast trip, maybe the stores down there will have something I like.
does anyone know where i can get a replacement 3 inch bow stop roller and end caps from stoltz:( rp 333 and rp325) i live in louisiana and have the '19 PS15 w/ 65 merc 4 stoke The stock black rubber roller is always marking up the front, tho it does clean up, but im tired of having to spend the extra time
That I would not know, but I don't think they are designed for seats to be installed. Best to contact your boat dealer on that one. Thanks for watching!
@@WeGoFishing I was told they make a bracket for the little square in the middle of the casting platform gonna find one for mine also when you turn on the live bait well back up for a little bit it’s air lock mine has the same problem
let me tell u that front bow roller is terrible on all boats i just got a 2020 G3 20 bay deluxe and i hav only launched it 4 timez so far n it is all beat up and leave marks. and my front live well is the same if i put it in reverse i can get it 2 work. and it bothers me 2 no end that a spare tire is an upgrade option i mean come on we spend all this money on a boat motor n trailer n u cant give us bout 200 dollar spare tire!! and i agree with u that placement for ur gas tank i can c were that would've been a pain they could've came up with a better ideal like u said made an access panel
It does have a few issues, but overall it is a pretty solid boat. If they could fix the live well issue it would go a long way with most people. Thanks for watching!
Check out our Unfiltered Three Year Follow-up Review! - th-cam.com/video/ZYhwpBFZIcg/w-d-xo.html
Very well done video review. As the owner of the same boat for 2 years now (2018 model), I agree with everything you said. It irks me that Mako has had 2 years to fix the livewell design and they haven't done it yet. I took mine to Bass Pro to fix it. They said there was nothing wrong with it. I said there was something wrong. They didn't have a way to put the boat in the water to test it or let me prove to them that there is a problem. The service manager told me to put the boat in gear moving forward before turning on the pump. That doesn't work. Wasted trip to fix something that should be covered under warranty. It's still broke 2 years later.
I have the 60 horse, a 9" Humminbird Helix Mega side/down scan that I love. Same Minn Kota Terrova that I love. Rarely use my anchor anymore.....YAY! Spot Lock is the bomb. Love the boat and it's stability, hate the livewell.
Thank you! Right there with you! Love our spotlock. It is a gamechanger for sure.
I agree with you on the console tray.
As far as instruments go, they’re not cheap but perfectly available. Such as: water pressure gauge, volts.
Yes, you can cut an access hole in the deck for fuel tank filling. Did it. I also added a fuel gauge.
I recommend using clear rollers for your trailer. They are non marring.
I am also a big fan of “boat buckles” as a replacement to the standard transom tie downs. I’ve used them for years.
Great suggestions and upgrades! Thank you for watching and sharing!
Great review! I have a Pro Skiff 17 and some upgrades that I had done was added a flush mount Nav light, added a flush mount cleat in front of Nav light, Swing bar with rod holders at Capt seat and the one thing I feel ALL south TX boaters should have is a Bimini Top! Just some ideas! Keep them lines tight!
I have definitely thought about the Bimini Top. Have you found that it interferes with fishing? Swing bar sounds like an awesome upgrade. Thanks!
We Go Fishing If your only fishing 2 people, not at all. It covers the center council and leaves plenty of fishing room on the front and back desks. Real nice to have something to get out of the heat for a little while. I also added 2 rocket launcher style rod holders on the swing bar, game changer for sure.
Great review. You commented on a FB post I made in a Mako group and pointed me to this video. I appreciate it!
Hey man, thank you so much and I am glad it was helpful. All in all it is a pretty great boat just be sure you get the right size for you and the power.
@@WeGoFishing I’m up in sw Oklahoma and mostly fish smaller lakes 2500-5000acres so I plan on the MPS15cc with the 60hp. Just waiting to hear back from Mako.
Spare tire is a must have and a great upgrade. One of things I used to carry when I had a boat was the hub & bearings. I have been stranded on the side of the road with a burned out hub. After that I started carrying a spare. Great video.
Right on!
Thanks.
Trying to talk my wife into letting me buy a boat so we can get on the intercoastal here in NC. I told her it was more for our Labrador than me lol. Wish me luck
You got it! It is a blessing to have a wife who wanted the boat as much or even more than I did!
Yes. Must get the wife onboard before purchasing a boat. 😆.
Same, I’m trying to buy one to fish In the inter coastal water way for NC aswell!
@@calebk4685 what kind of boat are you looking at getting?
@techguy did you get the boat
Excellent review, two thumbs up 👍
If I may ask you please: how many feet are needed in the garage to place that boat like you have it. Thank you so much 😊
Thank you so much and I am glad it was helpful! I would allow 21" for clearance. 20'6" from tongue to prop in the garage. You can save some space if you get a folding tongue. They are pretty easy to install.
@@WeGoFishing Thank you so much. I just subscribed to your channel with all the bells 🔔 😊
Thank you! Much appreciated and we hope you enjoy our content!
Hi… first, thanks for you sharing your experience, very objective and very helpful… since you’re located at South Texas, I guess you spend quite time fishing in-bay, have you regretted not getting the 16 or 17 feet boat instead of the 15’ ? Have the 15’ been enough for your needs?
Hey man! Thanks for watching! We do inshore fishing, especially the marshes and flats. If you can afford it, the 17 provides a little more space, but it really isn’t that much over all. You don’t net that much more space on the 17. It really depends on how many people you take with you. 2-3 people works fine. Any more than that and it get small quick.
Just a comment, maybe you could epoxy a plastic handle to side if gas tank to easily slide in and out
That’s a good idea! Thanks for sharing.
I have the same live well issue. My fix which still sucks is to keep a 2-3 foot piece of tubing of similar diameter as the output sprayer. Unscrew the nozzle all the way and hold the tubing on the output and blow the water out of the line until you feel/hear it clear. Then it will work. Sometimes I have to do this every time we move and sometimes it still works it’s definitely an issue with these Makos.
At least we aren't alone with the problem. You would have thought they would have fixed it by now. Thank you for sharing your work around!
Going out on a limb but the things u hate or dislike about the boat other than the live well issue may be some of the things that allow you to like the price of the boat. Great review. Thanx for taking time out from boating to do the review.
I think you may have a point. Price sells! It really is a great boat for what we use it for. Nothing is perfect, but it crosses a lot of t’s. Thanks for watching!
Great video! We’ve had our 2020 pro skiff 15 for a few months now. Good to see someone else with the same experiences and opinions. I too hate the trailer wheel on the bow, and our live well doesn’t work at all. Brand new boat, live well doesn’t work.... good job mako lol
Right...seems like a common problem. Someone told me to bug the boat dealer and then Mako will eventually replace the motor which *may* fix the problem.
Isn’t it covered under warranty?
Yes it is, but they won’t replace because it is functioning, it is something in the design which doesn’t pull water in properly
Great review. You asked for ideas for upgrades. Have you thought about thru-hull rod holders bow and stern?
Thank you for watching and for the ideas! I did install rod holders on the front of the boat and I tried ones on the rear casting deck, but I felt like they kept getting in the way. I am thinking of installing one or two on the ice chest seat.
For around $200 you can add Mercury Vessel View to your engine. That would let you monitor the engine on your phone.
I hadn’t heard of that. Thanks for the information!
Perfect timing! As soon as i get back on my feet the firsf thing im doing is investing in a boat. Need to start doing my research!
Yeah man, Some people are so down on boat ownership, but you have a great source in your dad to point you in the right direction!
What length is the shaft of the trolling motor and where you store the battery?
I think it is the 56” length (I am saying that from memory). The dual batteries are in the front compartment. There is plenty of room in there for storage.
@@WeGoFishing awesome and thank you. I have the same trolling motor but they come in 3 sizes. Mine is 54", perhaps yours too. Thanks for taking the time to answer my questions.
@@TidyMighty no problem!
How is attached the anchor to this boat.Can you show please?.Thanks
We have a couple of options for attaching an anchor. In shallow water, we use a stick pole and it has increased over opportunities dramatically. In deep water, we use the trolling motor on an anchor function. In a pinch, you could use the hook on the front of the boat for an anchor line, but there is no middle cleat for a proper anchor. Hope this helps. Tight lines!
@@WeGoFishing Thanks🙏🏻
You might want to add a pop up cleat at the front for your anchor line.
Thank you for watching and for your suggestion. We rarely anchor, but it would be a good thing to have on the boat just in case!
Brother,
Great Video! I am thinking of the 15 for freshwater fishing.
Do you know if the boat will accept a fishing chair on the bow?
Cheers,
Eric
Hey man, thanks for watching! I used the skiff in lakes bass and crappie fishing. I don’t know if a chair on the front casting platform would work. I don’t know the answer to your question. Maybe a tech at bass pro or a dealer would be better to answer that question. Tight lines!
Put a strap around the gas can so you can pull it out when necessary. Some automotive vinyl or rubber edge molding on the lip of the back deck to keep from scraping you arms when pulling out the gas tank. Bigger wheel at the bow will prevent it from hanging up when launching the boat. Air lock on your livewell fill hose, had the same problem with mine, you can't have any dips or low spots in the hose run from the pump to the livewell that will trap water, kind of like the u-trap on your sink drain. Otherwise, Nice boat, almost bought one, but decided on a bigger boat and different brand.
Great suggestions! Thank you!
I was thinking Bigger Dia roller..and searching if anyone mentioned it ya beat me.....
Awesome video! You happened to know the top speed for the 45hp motor? Also saw that there was some scratches on the bottom and lower side, so how is tue paint and gel coat holding up? Thanks
I cruise at about 25 mph easily. They are just some scuffs...the gel coat and clear coat are holding up good so far! Thank you!
I cant tell entirely by the video but it looks like the aft deck over the gas tank should be lift able to retrieve the gas tank as it is not molded into the hull perhaps you could check underneath for possible releases so it can be lifted, Robalo does the same to their fuel tanks but they are removeable. If it is not moveable perhaps drilling a flush mount fuel filler cap over the tank and attaching with a tube between the 2 would work.
I will check again, but I didn't see any the first time. That would be a facepalm moment. lol and your second suggestion is an option I am looking into.
I added a swing away boat ladder to my pro skiff. We found it very difficult to board back on the boat in deep water so for safety reasons look at installing a ladder. Good video!
Great idea! Thank you for sharing!
Thank you!! Picking up a new 2020 today 😊
Awesome! It really is a solid boat and the price point makes it a great choice.
Put some bungee cords and some kayak loops on the tray to prevent items from flying out. As for the gas can, perhaps you can put some pull-out rails on the floor to slide to tank out, but you have the lip problem..
Thanks for idea about the tray items. The gas can is the lip problem. I did end up getting a low profile gas tank and it helps some.
@@WeGoFishing No problem! Did they ever fix the live-well situation?
No...but I was able to figure out a couple of work arounds. Still don’t trust it and I always have a bubbler on.
@@WeGoFishing Well that stinks, do you think it's worth the price still? I'm looking at a new boat b/c I cant get my project boat working. (89 McKee Craft Aruba 60 hp 1989 Mercury)
@@gdm4584 I think so, although...depending on what kind of water you find I might consider the v-hull mako
Nice vid. Thanks for sharing in detail.
Thanks for watching!
What area are yall located?
Thought I saw a bridge from cctx area
When this video was taken we were fishing out of the Corpus Christi area. Thanks for watching!
@@WeGoFishing awesome 👌
Great content
I have a 2013 MPS 17" and the live bait has always had the vacuum lock problem. They should of had it fixed by now. The bump roller looks to small I would install a larger non marking one it should roll off easier. Also I had a problem with the short guide poles going under the side overhang trim. So I bought a 10' schedule 40 pvc pipe cut in half to have 5 ft poles. I like the ratchet straps i'm gonna get a pair. I agree with you on the Texas heat whatever is easier and faster is the way to go. Congrats on the boat and happy fishing.
I would have thought they would have fixed it too. It is a common complaint. Agreed on the roller. The ratchet straps are AWESOME! I absolutely love them. Thank you for watching and tight lines!
What do you think about a used 2016 Mako pro skiff 16 for $14,500? I'm going to look at one but don't know much about them. I saw this review and you did great. I've always had V hull boat but I also was living in the Keys here in FL. Now Im mostly around lakes. Is the height of the sides of this boat safe? Do they come w/a bilge?
Seems a little high for that year, but I am not a boat market expert. They do have a bilge that is switch operated. In my opinion, they are solid boats and we enjoyed ours very much! Thank you and tight lines!
@WeGoFishing Ended up getting it for $13,500. He had lots of extras on it including a outboard mount that you can raise & lower the motor w/o using the tilt & trim.
@@bpgomez1 That sounds awesome! I hope it serves you well and that you make great memories with it!
What a great review of this boat! We have considered buying a boat in the future, and this is some great insight into what we could consider and watch out for when considering a purchase. Cheers!
Thank you so much! Tight lines!
great review! quick question on where you got your fishing ruler from and name of brand?
Here it is www.amazon.com/dp/B011OR8NWE?psc=1&ref=ppx_pop_dt_b_product_details
I like the style of these boats because they're simple, affordable, and stable. That front reminds me of my old 1970s Tri-hull and I loved that boat. I know it isn't designed to be a pleasure boat, but it looks like you could swim from it and maybe pull a tube behind it. Have you boarded the boat from the water and how hard is it to pull yourself up the side or back?
We have and the kids can do it easily. For me, a little harder. If I was doing it regularly, I would probably get a boat ladder of some sort
Very good review of the skiff. My fishing buddy has the pro skiff 17, it a nice ride.
Thank you! I thought about getting the 17, but I was afraid it wouldn't fit in my garage. Dumb HOA!
Can you tell me the total length of the boat including the trailer? My garage measure 19 feet.
From previous videos I believe it was a little over 21 ft.
20'6" from tongue to prop in the garage. You can save some space if you get a folding tongue. They are pretty easy to install.
I needed a swing tongue on the trailer in order to have enough room to walk past the rear of my boat (same boat) when pulled straight in. I have my water heater and a chest freezer behind the boat, though. If you have nothing on the rear garage wall, you may be ok without the swing tongue or if you put the boat in at an angle.
Does having the motor down gain you any space? Or is that a big no-no. I’m in the same boat,
@@nagamus Yes.....motor down gains space. I always drop mine after pushing it in. I put a piece of duct tape on the garage floor where the tongue wheel is supposed to stop so I don't go too far before dropping the motor. Just remember to raise it and put the transom saver back before you pull out next trip! My dealer charged $250 to install a swing hinge. It takes sawing apart and drilling 16 holes in the tongue, so I said yea.....go ahead and do it. You got my wallet for the boat, anyway!
Ok so we bought a 2019 Tracker V175 combo brand new in Illinois and the dealer told us that if we moved to Florida, it would be "great in saltwater". Come to find out, it's probably not best....definitely either need to replace the trailer or lose our butts by trading or just selling outright to someone else. What are your thoughts? We are also a family of five. I'm actually shocked that this boat provided enough space for your entire family.
Wow! Sorry about your experience. I don't know about the Tracker, but I depending on your budget I would take a look at the LTS series from Mako. We have enjoyed the Pro Skiff and it can hold 5 people or 850 lbs. As our kids get older (they are smaller now), I will need to upgrade. So many factors to consider.
Thanks for this - next please give us pros and cons of your Yukon!
Normally we stick to fishing reviews, but thank you for valuing our reviews!
So I had bought me a 2020 pro 15 skiff I also have problems with the life well If you don’t mind me asking What size is the tires on these and also where can I find a trolling motor like yours at because I want a good one that will last a long time I love my boat and I think I made a good purchase for my first boat I would recommend it to anyone For there first boat
The trolling motor is a Minn Kota Terranova IPilot. I purchased our and had it installed by the dealership. The tire size is ST185180D13. I agree. It is great for the first time boat owner! Thanks for watching!
They should have flip up panel to access the gas can.
Agreed!
Awesome review. Really looking at this boat. Issue is garage space with washer and dryer in garage I need to stop at 17ft. I saw Fulton makes a trailer swivel or swing, looks like easy install. I think Mako puts the same trailer on the 15/17/19ft? Curious as I cannot find the info the distance from say propeller to where the front of trailer could potentially swivel, around where you have the spare. Guessing yours is about 21ft as is right now? I hear good things about the fish finder you got, Think I will do the same. We are in skinny water also but just north of Tampa.
It depends on if you have the motor up or down. You can get a folding tongue which will help some.
Did you ever figure this out @troy Miller? I’m in the same position as you. Length is the issue for my garage and I’m curious the length with the swing tongue
What is the length of your garage, and what is the length of your trailer
20'6" from tongue to prop in the garage
Where did you get the trailer with swing away tongue?
We do not have that option, but it is either from the factory or it can be modified later.
love this boat. Your garage is big.
Thank you for watching and yes it is a blessing to have an oversized garage.
Thanks for the review. Just did a walk around at Bass Pro. One question: I only saw seating for two adults. Where do you put the kids while under way?
It depends on how much the kids weigh. I put my oldest two on the back seated on the rear casting deck. Of course, feet in the boat. My youngest sits with my wife on the front seat or by me on the cooler. It really is about balancing your weight. My kids are small so it doesn't cause a big issue. When they get bigger, we will see :)
In my opinion, I think that if you have several people on the pro skiff 15 (and I don't believe there should ever be more than 2 or three adults on such a craft)... while the craft is underway, children should be seated in the front of the vessel facing the rear. Spacing the weight evenly across the bow. (I wouldn't take any guest that wasn't an adult). To each their own. I only want to make sure that safety precautions are taken and that people do things at their own risk. The difference between a great day on the water and a tragic accident is the vigilance of all on the vessel. Please be careful.
Great review man!! my dad and I going next week to get the 17 , are the payments to high if you don’t mind me asking? If paid in full then avoid my question lol
We saved up and paid cash...from what I remember the payment term seemed pretty affordable.
It would be nice if it had an option for a canopy sun shade thing. 🤔
We have thought about putting one on several time, but were concerned it would inhibit the fishing. If anyone has any experience with this, please let us know!
How dry does it run the center should keep u dry ?
It does pretty good at staying dry. Honestly, I don't go out if the wind is over 15 mph, but it handles chop pretty well for its size. Thanks for watching!
Hello, we live in Dripping Springs, TX and go to Rockport/Port A a bunch to fish. I’m looking for something like this and am curious how well you hold up in bays? Great video. Thanks.
Really nicely! We took it from Corpus all the way to Baffin....an hour ride and it did great. This boat was made for inshore fishing!
What dealership did you go to?I live in south Texas too and loved the boat.
Thanks for watching. We went to WayPoint Marine in Corpus Christi
@@WeGoFishing thank you so much
Awesome video looking to get into one of these. How’s the bottom of the hull holding up? Looks like a few scratches in the front. Possibly from oysters?
It does have a few scratches - mainly from getting too close to the spoil islands lol. We use the boat a lot and it is looks as good as new…minus the few scratches. 😎
@@WeGoFishing thanks! Looks good I was just curious if it was affecting anything
@@vProxiima no not at all. It is a really solid platform.
@@WeGoFishing thanks for the Info! Tight lines
Great video. What is the length of the trolling motor shaft on the one you upgraded to?
Thank you! If my memory serves me correct we when with the 54”. It has served us well!
I found a bigger wheel trailer jack for my Pro skiff 17 at Academy 5000 lb trailer jack works extremely well
Thank you for the recommendation! We will check it out!
My mistake it's a 1500 lb big wheel trailer jack from Academy Sports
No worries...will check it out!
@@WeGoFishing Marine Raider $80 plus tax
I was also curious to know the size of your stainless steel prop do you have any cavitation getting up on plane??
Hello, I just picked up the same boat. How well does the transducer work where you have it mounted? I am going to mount one to a stern saver pad in the same area. Thanks!
We haven't had any problems with the location of the transducer. I would think it would be the best place. Good luck and tight lines!
@@WeGoFishing Thanks for the reply! Hope you are still enjoying the boat.
@@beechjet400xp We are! it is a really solid platform and does what we ask it to do. Stands out for flats fishing!
@@WeGoFishing Thanks again, looking forward to getting out there!
got a 2019 pro 15,,,,,the very drain hole plug....its lower than the bilge pump......have to drain it everytime i go out fishing...seems to be a void area under boat hull......guess water getting down there fro front hatches....gonna install a t top soon....plus no anchor guess i get pole anchor its better....anchor area hatch is a joke too.
I hadn't noticed that on the 2020...I will have to check that, but I pull my plugs every time. I rarely if ever have water that drains out. I have thought about a t-top, but I would have to make it removable. Let me know how that goes. Yes, there is no anchor cleat, but I have the I-pilot. I have thought maybe pole anchors especially because we fish shallow areas. I put a cast net in my anchor hatch lol
Like I said before we have the same boat and we love it too.
It is a great boat.
I've got the same boat and mine is taking on water in the hull I went out for about 4hrs an I unscrewed the brass plug over 5 gal. of water came out.
WOAH! How far did you go out?
@@WeGoFishing a few miles to the sandbar
Where is your minn kota heading sensor located?
It is under the console. Thanks for watching!
@@WeGoFishing Nice I didn't think of that! I didn't want to put it up from because of cast nets and wasn't sure if back deck near the motor would get interference.
Nice review and boat!!
Thank you! We are enjoying it!
Great review guys! We see a ton of Mako boats here in Florida
Thanks for watching!
I stopped for the Thumbnail.
Well thanks for stopping by.
Considering the same boat. Do you regret not going with the 60 hp?
Welcome to the channel! Not regret, but if I were to do it over again I would buy the 60hp.
Do you think it will handle a 15mph wind?
15 mph is about the tops I take it out in. Also, depends on wind direction and chop.
wish I could afford something like this make my boys dreamcome true one day
You’ll get there just keep grinding. 😎
@@WeGoFishing thnkz bud ya sux when took me years to save up for a gheenoe with a 20 hp tiller new only had it for a week and someone stole it rite outta my side of house its still hard to swallow especially my boys loved goin fishing on it so for the meantime we have couple kayaks we take out so one day we will get a nice family boat like yours could I finance something like this whats the price on something like you have we love your boat
@@tntcichlids8015 brand new about $20k...but there are other boats out there which you can get used which might fit you just as well
Can i get the model trolling motor you bought such as the shaft length and thrust
It is a Minn Kota Riptide Ulterra 112
w/ iPilot Link & Bluetooth (112 Lbs. Thrust, 60" Shaft) Thanks for watching!
Thanks
Great job with the review; I've been looking at this boat for a long time and have hesitated with the purchase because I didn't know how stable it would handle multiple people on the boat and I've seen others say upgrade to the 17'. I have limited space in my garage too and it looks like it fits in your garage just fine without having to angle it in.
Thanks again for the detailed review; I hit that red button too.
#getoutthehousegofish
Thank you! It really is a stable boat. Weight distribution is always important, but the platform is very stable. The 17' has a couple of features the 15' doesn't have, but you don't gain that much fishing room. Welcome to the channel!
@@WeGoFishing We ordered our Pro Skiff 15 today :-) Only thing we did different is we upgraded to the 60hp but I pretty much got the same upgrades as you got.
I just wish it came with a live well in the back like the 17 but no big deal.
I didn't see in the video where you talked about the steering upgrade but I chose to upgrade to the hydraulic steering because I saw in another video someone was complaining on how hard the steering felt sometimes.
They said it would take at least 6 weeks before it arrived after ordering.
I also wanted the Aqua green colored decal but was not going to pay that amount of money for a sticker.
You would think it would be a free option but no.
Did u find a good roller wheel in front of the boat I’ve been looking and I can’t find nothing for it??
I haven't found one I like either. Our local store has a couple, but I don't like them. Planning a coast trip, maybe the stores down there will have something I like.
How much did you pay for this?
Was just looking for one and they want 29k...
In 2020 we paid 22k out the door with the upgrades I show in the video. Base price was right at 18k.
@We Go Fishing thanks for the reply. We really want a boat but don't want to pay the ridiculous prices
@@hlhl2691 Totally understand...I looked at prices of boat last night and it looks like the whole market has gone up $5-7k.
Can i ask what prop u bought as far as ptich and size and where u bought it at
I bought it at Waypoint Marina in Corpus Christi Texas. I don't know the pitch or size, but I would think the boat dealers would know.
@@WeGoFishing thanks for all your help
Manual prime it just not enough suction to fill tank I use a coffe can Mines the same
Thanks for the suggestion. Much appreciated!
who makes your ratchet straps? Thanks!
We got them off of Amazon. They are made by Reese Powersports.
does anyone know where i can get a replacement 3 inch bow stop roller and end caps from stoltz:( rp 333 and rp325) i live in louisiana and have the '19 PS15 w/ 65 merc 4 stoke The stock black rubber roller is always marking up the front, tho it does clean up, but im tired of having to spend the extra time
In Texas, we have Academy, which is probably where I will end up getting mine. I am not sure about LA, but amazon has a bunch of options.
that thing has a taller bow than the mako 17 pro skiff. if that makes any sense. I think you could handle better chop than mine.
It does handle chop pretty well!
Is there a way to install seats on the casting deck?
That I would not know, but I don't think they are designed for seats to be installed. Best to contact your boat dealer on that one. Thanks for watching!
@@WeGoFishing I was told they make a bracket for the little square in the middle of the casting platform gonna find one for mine also when you turn on the live bait well back up for a little bit it’s air lock mine has the same problem
@@curtis-b9h Yup that is exactly what we do...then it works just fine. Thanks for watching!
let me tell u that front bow roller is terrible on all boats i just got a 2020 G3 20 bay deluxe and i hav only launched it 4 timez so far n it is all beat up and leave marks. and my front live well is the same if i put it in reverse i can get it 2 work. and it bothers me 2 no end that a spare tire is an upgrade option i mean come on we spend all this money on a boat motor n trailer n u cant give us bout 200 dollar spare tire!! and i agree with u that placement for ur gas tank i can c were that would've been a pain they could've came up with a better ideal like u said made an access panel
Thank you and totally agree! Hopefully Mako will listen to us and work on these obvious problems.
Hey !!! is the Mako 15 pro skiff self bailing ??? thanks for the walk around on your new boat..
@@chuckburcher3777 No It is not self-bailing. It has a switch for the pump.
Good honestly review
Thank you so much!
Nice rig
Thank you! We are enjoying it!
thanks nice vid
Thank you!
We like and hate the same things
Some should be easy to fix.
Nice video
Thank you! Tight lines!
Well, I was considering a Mako until I watched this video. I refuse to drop 20K on a boat that has so many issues. Mako...are you listening???
It does have a few issues, but overall it is a pretty solid boat. If they could fix the live well issue it would go a long way with most people. Thanks for watching!
These are minor issues. Important is the boat layout and performance.
Nice
It has been a great boat so far!
your boat guides are mounted wrong
Thanks for watching