@@JackedUpFishing happen to know where he got it? I’m completely redoing my entire bowfishing rig and finding a sheet that size is mainly what’s holding me up
Both you and Mike are respectful about not blowing up spots. Lots of people including myself gig here. All I can do is politely ask that you do your best to not show the spots or where you run to from the ramp. The way Mike shoots his camera angles you've got to really know the waters here to tell where he is. Boat looks great have you decided what lights to run?
Gigging is a whole different animal all together, spots are what makes a night. So i know what you are talking about for sure. I will be showing whats in the water not the exact spots if you know what I mean. Its taken me 25-30 years to accumulate my spots that produce sometimes 30 fish a night, and I would never willingly publish those spots. Hit me up on IG would like to know where you are out of.
@@Tyler-kw9ce This is my 3rd one I have done now. Each time I have improved on the build. This one I am going all out with rear flotation sponsons on the transom, picking bar with cockpit light, thru hull lights for under water, and above water lights mounted under front. Maybe twin trolling motors with custom props. Ideas are flowing. With regards to banging around, I have never had that really but seadek would be nice for sure.
Are you reading what you're saying to one side of the camera or just looking at yourself on the screen? It's really distracting... maybe don't record yourself close up if you're not going to look at the lens. (That's where your audience is)
@@JackedUpFishing if your image is on the screen... you're not looking at the actual camera lens. Just saying it's distracting that it looks like you're looking over my shoulder
i see some back water fishing and flounder gigging in the future
You know it!!!
I really enjoyed the video.
Thank you! There will be a new one every Tuesday until its done! Thanks for watching!
Dang man that’s great work. I learned quite a bit, thanks for sharing.
Thanks for watching!!
nice way to set a floor
Thanks actually working on it this weekend should have video soon
Impressive tools and skill set man 👏
Thanks Long!
Dang son looking at your garage its obvious you have some skills
Yeah, I gotta lot of stuff for sure. actually doing a big sale this weekend to clean out the shop.lol Been in boating industry for over 25 years.
Lol putting em to work! Looking good man, ready to see the finished product, i have a similar setup but with plywood instead of metal for the floor.
Lol yeah gotta teach them young! Gonna do a bunch of really cool stuff to this bad boy
Thanks again Ricky 💃🏼🕺🏼🐈⬛🍩☕️😆🤷♀️
Looks great I'd bed line it though so u don't slip an fall from mud
painting it with a nonskid paint, but yeah that would definitely work as well.
Love this video man , l have no idea about this stuff, very educational for me brother and congratulations on 1k subscribers, you deserve it.🤘
Much appreciated! We are having so much fun doing this. Plus it actually makes you go do more stuff, which is a bonus!
What type of aluminum did you use and how thick for the floor?
I got a 5x10 sheet of 1/8th inch aluminum from a friends shop
@@JackedUpFishing happen to know where he got it? I’m completely redoing my entire bowfishing rig and finding a sheet that size is mainly what’s holding me up
Both you and Mike are respectful about not blowing up spots. Lots of people including myself gig here. All I can do is politely ask that you do your best to not show the spots or where you run to from the ramp. The way Mike shoots his camera angles you've got to really know the waters here to tell where he is. Boat looks great have you decided what lights to run?
Gigging is a whole different animal all together, spots are what makes a night. So i know what you are talking about for sure. I will be showing whats in the water not the exact spots if you know what I mean. Its taken me 25-30 years to accumulate my spots that produce sometimes 30 fish a night, and I would never willingly publish those spots. Hit me up on IG would like to know where you are out of.
@@JackedUpFishing same here man. I don't have IG of FB or any social. But I'm out of NSB.
@@Tyler-kw9ce gotcha
Man I like your style more toys. I bet things have been super busy down your way this past week. Bike week and all the races.
You got that right! Bike week in full force and just got done with races. I tend to spend a lot of time on the water during these times. lol
How much was the aluminum sheet ?
It was about 400 bucks but it will do the floor and extend front deck
what brand john boat is that
Tracker Grizzly 1754
@@JackedUpFishing thank you
What is that welder you’re using?
I am using a Hobart IronMan 210 with a spool gun, running straight 100% argon
Are you going to seadeck the floor of the boat?
Im not sure yet. Gonna wait until I get done with it all and then decide.
@@JackedUpFishing you'll need some kind of dampening I would think. Can't stand stuff banging around In a metal bottomed boat.
@@Tyler-kw9ce This is my 3rd one I have done now. Each time I have improved on the build. This one I am going all out with rear flotation sponsons on the transom, picking bar with cockpit light, thru hull lights for under water, and above water lights mounted under front. Maybe twin trolling motors with custom props. Ideas are flowing. With regards to banging around, I have never had that really but seadek would be nice for sure.
@@JackedUpFishing check out the fan boats they run in Texas. Pretty wild stuff. It's like a small airboat engine with a tiller and small prop.
@@Tyler-kw9ce oh yeah I’ve seen them, pretty slick.
Did your boat come with the front trolling motor Mount?
Yes it did, but I am cutting it out actually.
John Boat to Bass boat style Conversion!
BTW I suck at spotting flounder!
Easy with right light 😊
Nice, How much that 5x10 Aluminum Sheet Run ya in your area?
I got it for around 400 dollars it’s 1/8th material.
Part 2?
Working on it today actually! Will post video here soon
Would have been sweet to add flotation in the floor also
Yeah but it always gets all nasty from shrimping juice and stuff
@@JackedUpFishing n/m screw that
@@jimbob9799 lol right😂😂😂
#2
.
Are you reading what you're saying to one side of the camera or just looking at yourself on the screen?
It's really distracting... maybe don't record yourself close up if you're not going to look at the lens.
(That's where your audience is)
No reading man! Don’t know what your referring to. I’m looking straight at the camera bud. Thanks for watching.
@@JackedUpFishing if your image is on the screen... you're not looking at the actual camera lens.
Just saying it's distracting that it looks like you're looking over my shoulder