Ktm Super Duke R 2020 Clear Clutch cover install
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Hi every one :)
Here a small video on how to install the Evotech Racing clear clutch cover on the new 2020 KTM Super Duke R.
I bought the parts here:
www.evotechpar...
Please LIKE and Sub if U like it :)
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
My dad went from a harley bagger to the 1290 super adveture s and this will definitely make a good Christmas gift for him.
Sounds like an awesome gift! 😁
Yasss in English.. thank you ! Cheers mate 🙌🏻!
Adds a lovely touch to the look of the bike. Great install 👍
Hey buddy I just purchased a 2020 model myself back in March and so happy you made this video. It looks amazing and can't wait to do it to mine as well.
Is this clear clutch cover the same part number as the 2019 1290R? They do not have a 2020 model on their website, so I'm confused on if it will work because they do have other 2020 model Ktm's listed but not the R model. I wonder if it's different because the cases are thinner now.
Im intrigued as to what the steel bits are in the original cover !. Looks like a thrust button in the middle of it. The Evotech one looks excellent.
You are careful and methodical Dam. Good Job!
Look great and easy to fit - I put one on my 1290 GT last year👍
This is dope. This is my dream bike wish I can afford this monster in future
me too
@@Beraksekebon21 best of luck brother sure you will archive it
@@roneesuzen3730 tahanks man,i'll make a video and share the link to you once i got one 😆
@@Beraksekebon21 sure I'll pray for you man
Thank you for spending your time! Good video!
Nice to see Kevin Magnussen changing his clutch cover! :)
😂
Now you can actually watch your Ktm when it breaks down 😁. Just kidding , looks really good. 👍
I'm sure you'll buy three smokey :P
Mike Delval I did love the clear cover on my Ducati Hupermotard , suited it really good. Not sure i want one on my Ktm. Awesome machine that 2020 by the way. Can’t buy one cause my brain can’t be normal on that bike 😂🙈
@@LifeofSmokey Ha ha, I must admit I I'm jealous of you, I have a 2017 GT, but would love an SDR.
Mike Delval Don’t be , i’m pooping my pants next 2 weeks. I got my picture taken last week on Monday by the cops with the GT. I pulled a 3rd gear stand up wheelies over a long stupid speed bump! But you know a 1290 so you know how fast it goes. I didn’t see a speed camera until my buddy yelled at me through our intercom 😂. But it was way to late , was doing 100 in a 30 zone! It was just a small twist on the throttle. Might lose my license for a month 🙈
@@LifeofSmokey Woopsy!!! Good luck with the magistrate. The thing is definitely a wheely popping monster!
Very good English, thanks 👍👍
Thank you to do it in english, my Danish is not as best as yours... Great vid' 👍 ! Regards from Belgium
Hey man great video I just did mine and followed you step by step lots of love from the USA!!!
Glad you liked it mate 😁👍🏼
Wow, no oil came out? That's amazing!
Awesome machine, Health to enjoy it!
My dream bike
well done. i like the effect it gives, character. i am not a fan of the black, it is not even close to the original and stands out in that regard.
Congratulations, Excellent video friend and that machine looks much more beautiful, I would like to know if it is necessary to take out the engine oil to be able to install this accessory.
Thank you very much 😁 You dont need to drain the oil 😁 If you park the bike on something higher (wood as in my vid) so it tilts more over on its kickstand there will not come any oil out 😁 Hope that helps 😁
Cool, thanks for the vid!
Nice clean job 👍
Thanks for English
Now you can see what's making noise :D
Thats true 🤣🤣🤣
Looks real nice Buddy ❤👍
Thanks :)
Good job very nice !!!
Looks Nice, but I think I prefer black...
Thanks for the good video. Is the orange plate still orange? I once heard that the oil colors them darker
It is still orange :) 😄
lol just what I have always wanted a clear clutch cover so I can watch my clutch spinning , ffs what a woftam
I am very glad you watched my video, and thanks for the nice comment 😄
I purchased full Akrapovic exhaust system and Lithium battery, weight saving almost 15 Kg. Totally waken the Beast up. Is it faster with the see-through clutch cover? Lol looks good 👌
So are U running the Akra map? If so, is it true U have to disconnect your indicators before starting the bike?
@@DamTheDane Correct, but you can install a relay box which will negate this. I have this done on my '20 Superduke. Easy google search will give you everything you need.
Hi mate, great to see this! Btw, is it available for 390 V1?
I dont think its available for the 390 🤔
Interesting!.......Let me know if you have any problems.
Thanks for the video. What brand torque wrench is that you used? I need to add that to my tool box.
I used a little Beta torque wrench, but any little torque wrench will do the job just nicely 😁
I ordered the new o ring. Seems to big by a couple mm.
It can seem to big. But make sure to press it in and not stretch it while you do it 😁
@@DamTheDane I think it’s when it meets itself. It just is to long. So I undid a bit at a time. Then fed it back into the groove until it was no longer to long 😊 seems to fit pretty good now!
Nice you got it to work 😁👍🏼
Bro i have one superduke 1290r (2020) and i love it! Can you Tell me where buy this;)
Evotechparts.com is where I got mine 😊
Link is also in description 😅
hallo min nabo xD Norge her hehe
Looks absolutely amazing man! Can you tell me what tool you’re using for the correct Newton?
I used a small 1/4 Beta torque wrench 😊 Thanks 😁
How do you guys know the Newtons for the majority of the bolts in a bike?
@@hagaxxx steht normalerweise in der Reparatur Anleitung, kannst du bei Ktm.com runterladen.
Die M6 für den kupplungsdeckel haben 10nm
@@CyberducPA my German is quite basic 😊😢
@@hagaxxx i wrote: you can download a repair advice from ktm.com, the tightening moments are written there, for the clutch cover its 10nm. sorry for my bad english, i hope u understand me
Dam thank you for the great install video. I have been looking online for that same cover. I can’t any that say that it’s specifically for the 2020 model. Will the one for the 2019 fit? Thank you
The 2019 will fit the 2020 😁
Thanks bro much appreciated
You are welcome mate 😁👍🏼
Appena comprato. Di che grandezza sono i dadi dello spingidisco? Grazie
Lo necesito para mi KTM 990 smt donde lo compro
Hi Dan, i just instaled this clutch cover and i have like white substance on that glas!! Do you have a same problem? It doesn’t look nice at all
That is all normal 😁 It does the same on the oem cover, you just cant see it 😅
Give it a good 30min ride and it should clear up, but it will come back next time you go for a ride. It all normal 😁
@@DamTheDane thank Dan. It looks great on a bike but i am so upsat about that splash white crap. But thank buddy appriciate ur help
The only way to not get the White crap, is having a dry clutch I think 😅
When you don't ride them long enough and the oil temp doesn't get over 80°c you'll get condensation. If the ambient temp is less than the internals you'll be drawing in moisture when it cools down.
These bikes need to be ridden, Not just shorts trips around town. Have fun gents
Can i put that on my rc390??
No, I dont think Evotech Racing is making a clear clutch cover for that bike. 😊
I did it today but clutch lever wont pull is hard ! How can i fix ? Please helppppp
Take it a part again and make sure the springs are seatet correctly in the pressureplate 😊
@@DamTheDane will try tomorrow again thanks
Fixed it 🔥🔥🔥 metal disk was backwards 🤦🏽♂️ but no i get a milky oil all over the glass
Good you got it fixed 👍🏼
Mine also got milky, but after a 30 minut ride it clears up 😊
Depending on how humid your climat is where you live, it will get milky everytime you go for a ride, but clears up ones the engine gets nice and hot 😊
Nice Video!
What torque wrech do you use?
Just a small beta torque wrench 😁
Hi how did you get the new seal to fit ? seems to big
When you install it, be carefull that you dont strech it when putting the o-ring in the cover 😊 It should fit perfectly 😊
I finally got it was a nightmare making it fit. O Ring seems to big finally got it in
Can you send the link to where you bought the clear clutch cover plz. I want to get it
www.evotechparts.com/en/
Is this possible on DUKE 390???❤️❤️❤️
No 😊
@@DamTheDane okk, sad to hear that... Thanks to you btw ❤️❤️
I didn't realise the 1290 used a dry clutch.
It doesnt 😅
@@DamTheDane What's the point of the see through clutch then? Don't you just see oil?
@@6Twisted You can still see it just fine. But yes, you can also see oil being pushed around, but not much 😁
@@DamTheDane Good to know. I'll add it to my list of mods 😅
have you experienced any issues with the spring plate cover or any operational issues? I saw another guy who posted a video and he had to go back to the stock plate with the clear cover. Thanks for your help
No issues at all 😁 works perfect 😁
@@DamTheDane glad to hear. Thnx
Did you have to drain the oil before you removed the clutch cover?
No but I placed the bike on a piece of 2by4 to make the bike tilt a bit more 😁
Awesome thanks. That clutch cover looks sick!
do you have to remove the oil from the engine before?
Not needed if you place the wheels on a piece of 2by4 so it tilts more to the side 😊
@@DamTheDane thanks👍
Personally I rather purchase a proper steering dampener the oem is useless. Going try drill tap put thicker oil. I refuse make KTM richer they should of put the Wp dampener. Looking good though. When I can afford it carbon rims, but company in USA Apex 6 make forged aluminium at half price of carbon. At nearly same weight. Call them or email ask them make them if enough ask they'll make them.
Looks good. Where did you get the wheel graphics from? Cheers Rob
The wheel graphics are from KTM :) Ref: 6130999910004 and Ref: 61109099000
For what?
To see when it breaks 🤣🤣
100% poser mod. only the sensitive will reply and cry.
100%