ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Garden Bench Build With Free Model and Cutlist
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- I made this garden bench for a local wedding venue and I thought that I would give SketchUp a try and make a model of the build. Well, it was a success and I'm hoping that this video along with the model and the cutlist, will help ya'll build a bench of your own!
I used rough cut cedar that had some voids in it, so the black areas that you see on the wood are epoxy filled. If you are looking for some high quality epoxy go over to www.totalboat.com and use code blueline1 for 15% off.
You do not need to use cedar for this project, but cedar is a great choice for any piece of outdoor furniture due to its rot resistant properties. You also don't need a domino joiner to complete this project. Dowels will work just fine or even hand cut mortise and tenon.
For a list of tools/products that I use, check out my Amazon store here www.amazon.com/shop/lazylabacres
The link to the cutlist and the garden bench model can be found on my website here
lazylabacres.com/product/free...
Thank ya'll for the continued support, I hope this was helpful!
#garden #diy #freeplans
![[TH] VALORANT Champions Seoul - Group Stage Day 5 - DRX vs FNC](http://i.ytimg.com/vi/EGLDAmaBOhU/mqdefault.jpg)
Completed the bench following your video. Thanks for a great tutorial. I’m a novice working in a garage so this was pushing my skills. Had to buy a few tools but completed with radial saw and track and mitre saw. Used white oak with worm holes. Very nice look. Had to laminate to get to your thickness. Legs x3, arms, seat supports and rails x2. I used dowels… big learning curve there! I must have been off on my 10 degree as the middle seat supports and arms were just short of angled back. Had to improvise. Thank you so much for this very doable project. Wish I could send a picture.
I think everyone has already said it but here we go again, great garden bench, very clear instructions and a very personable video presence. Overall, I enjoyed watching this and loved the care you took in providing your client with a quality product.
Could I buy one ?
Thank you for your service, your time, and your generosity with your knowledge. My son is using the plans for his Eagle Scout project and has been watching your videos nonstop.
Awesome! Thank you for the support!
Nice build......I downloaded the plans.....thanks for making them available for free. Young man, you are a class act, with excellent videos and superb instructions. I've been a subscriber for quite a few months and don't see any reason to quit. I'm 66, widowed, retired and love making sawdust in my shop. Thanks again!!
I appreciate the support Frank! It means a lot!
Great job love watching your videos. That cedar you got looks amazing amd thank you for the free sketch up should be a good item to sell seeing that spring is around the corner keep up the great work
I appreciate the support!
I'm making one as soon as it warms up. Great stuff!
Awesome, thanks for watching!
Excellent Work, Top Marks
Nice work, thank you for allowing free plans. Will give this a try for my front porch.
Thanks for watching!
Compliments for your work and high quality explanations. very much appreciated watching. Greetings from Luxembourg! C.
Thanks for watching!
Nice work man! I appreciate you offering the plans also. I also may have to purchase a domino. Been thinking about it but I believe it is a game changer.
Will be my 1st bench I am building. Thnks for the download & teaching. Nice Shop U have.
Thanks for watching!
Thank you mate for very awesome job, I really appreciate your project, You have very very expensive and latest power tools, Thank you once again for posting very good quality video
Thank you for the support!
really nice workmanship there, really impressed with the finish product, thankyou for the helpful video.
Thanks for watching!
Awesome energy, and thorough explanation. Thanks for the plans!
Got a new sub, mate, keep the hard (wood) work
That’s a great build. Very talented. The instruction was top notch. Very doable if you have a shop. I have access to a shop so I will be using your knowledge on my bench build. Thanks for the great content
Thank you for the support!
Good job man that turned out really nice
Enjoyed the video!! Great project!! Looks very nice!
Thank you for the support!
great clarity
Excellent Work, Perfection
Thank you!
Beautiful Work!!!
Thank you sir!
Looks awesome!
Thank you!
love your bench, nice and english countryside stylish. Might be another project on my list ;-)
Thanks for watching!
Thanks. Very good. From Brazil.
Beautiful! I like the way you explain your project with very clear instructions. Your bench looks amazing! What was the most challenging part of this build? How long did it take you to build from beginning to end?
Thank you for the support! Most challenging was probably just the plan and figuring out angles, layout, etc. I worked on it during my days off and would say about a week of working here and there on it
That's really heavy duty duty bench, thank you for teaching us
Thanks for watching!
great video brother.
That looks pretty nice...
Thank you sir!
After getting this stuff few days ago, I could hardly put it down afterwards [Link Here== *TopFineWoodworking. Com* ]. There are lots of colorful pictures, with detailed descriptions of every step in the project. You will never miss your way using this plan. It was more than I expected.?
Nice build
Thank you!
what are the final dimensions of the bench ? I have seen the model of the build. But i can't find the outer dimensions. I would like to make this bench, but downsize it a bit. BTW Lovely project and great video!
Nice. Would i need to apply a protective coat?
I can not find the download plans. Can you please post them?
I think I'll make one out of Redwood. Cedar is a bit too expensive where I live.
Would it be a bad call to use green square cut cedar from HD?
Nice vid
Thank you!
The color of that wood is gorgeous! Is that aromatic?
I want to make this bench so I downloaded the plans. I noticed that the video gives some different dimensions than the cut list. For example, you the video says the back leg board is 34” but the cut list says 2’ 9” which is 33”. Which are the correct dimensions, the vid or the cut list. I assume the cut list has the dimensions I should use, but I want to make sure. Thanks
Very nice project and presentation. I see you are using the Rhode Wireless GO microphone in some of your shots, I recently started my own channel and am using the GO with the lavalier mic.
I'm liking the wireless set up. When I'm not wearing it, I use the Rode shotgun mic which seems to work pretty good too
@@LazyLabAcres Most anything is better then the built mic on the camera, the only thing that is good for is as scratch audio to use to sync to. By the way, thank you for your service from a Navy vet and police officer vet.
@@AndersenWoodCrafts thank you for the support, Go Army!
Unable to download plans… how do we get them if they are free, but unable to get them? Thank you…Love the video and bench, just want the plans please..
Awesome bench. Love the cedar look but it’s too expensive for me so I use Larch which is also rot resistant and insects/ rodents won’t touch it either.👍🏼
Cedar is not expensive at all here in central NC. I appreciate the feedback!
*TopFineWoodworking. Com* is a fantastic website about wood working. I took various classes as well as finished a one year diploma in carpentry at a local tech college; this is much better than any book I worked out of during those lessons. It explains everything regarding woodworking as well as complements it with helpful photos.?
457
What is your website so I can get a copy of this bench plans?
Awesome build! Went to try and find the plans but couldn't. Which tab is it under on your website? Thanks!
Its under the available products tab
@@LazyLabAcres awesome! Thanks 👍👊
Where can I find the dimensions. I downloaded the plan but it's simply a cut list
Nice looking bench turned out great
Question for ya do you ever have issues with that planer feeding product in the cold weather. I have the same one and seen a video where below 30 the rubber feed wheels will slip on product which mine sometimes does. If you do have this issue and tips you could share? Thanks in advance look forward to your next video.
Occasionally that'll happen. Wipe it down with some paste wax and it should eliminate that problem
BlueLine WoodWorks okay thanks I’ll try that
Am I overlooking something cause I can't find the cut list or the Sketchup file? Thanks for the video the bench looks awesome.
It is on my website, but I just updated the link in the video description to take you directly to it!
@@LazyLabAcres ok thank you
Nice work but I need help because I couldn't download the cut list please
Bro digging the stash you should have grown it out more and twisted the ends like a old school strong man moustache!
Regulations from my PD and the Army only allow me to go so far with it lol
It's probably because I am deme but I can't seem to find the download plans for the bench. Can you repost them for me please. I want to build this in memory of my baby niece Sarah-Louise Connor. Born 8th July 2020 11.30am. Died 3 minutes later. We are all heart broken & need a place of beauty to sit & think of her. We will plant a tree & rose bushes there so a bench would be lovely to be able to sit there.
Would you send me the model andcut list . Great video!!
Just a quick note.. I always spray the attachment points with a clear poly or lacquer before I attach the slats, arms or back. Great bench!!
What benefit does spraying the attachment sites provide?
I would think that would negatively affect the glue joints.
Awesome project and beautiful wood choice man! I see you have an NC shirt on. I live in Mooresville. You live in NC?
Yup I'm just north of Raleigh
@@LazyLabAcres I hear ya man! Awesome. Great videos. Wish I could do some videos of wood working. Love doing it.
@@Lightspeed30 it's an awesome way to spend time. I'm hoping that I can do it full time in the near future
@@LazyLabAcres that would be awesome man! Yes, its soothing to me to see a finished product that I built. My wife and I just built a shop to do wood working in. But I'm no where as smart as you with the stuff like you do. lol. I enjoy watching your creativity.
@@Lightspeed30 one project at a time and don't be afraid to get out of your comfort zone and you learn quick!
Wet Qtip to remove glue
Where is the cultist?
Great video! Would you consider putting the lowest seat slat closer to the back rather than the middle to encourage better seating position?
Could you do a giveaway for some of your projects
Not sure what I would give away lol
man u missed such an opportunity to troll us a bit. give the intro then start the build in full mustache glory, like its nothing
hahahaha
Nice work 👍
I am carpenter
hey man, army vet ?
O3 in the reserves
That mustache was out of control!! Haha jk
It was glorious!!!!
first
Congratulations!
no mustache
Unfortunately, I have no idea what you are doing in the beginning of this video.
What you building a child’s bench??? 34” for legs and backrest is a baby seat not a adult one
You're incorrect, but thanks for watching!
The average person does not have these power tools. Video is useless. And you look way better without the mustache.
Typical Karen 😂 thanks for watching!