ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
unboxing & build a D2-1 Intelligent Tracking Car Kit | MR SHA
ฝัง
- เผยแพร่เมื่อ 14 ธ.ค. 2017
- unboxing & build a DIY D2-1 Intelligent Tracking Line Smart Car kit suite.
D2-1 Intelligent Tracking Car Kit : amzn.to/2GTIbBc
i hope u like this video.
.................thank u for watching...........
9 year-old son
has just completed assembling. Couldnt finish without your video. Thank you very much. I bought the kit from China, sent to Japan via amazon. I put your video’s link on amazon’s review so that other people can watch.
Thank u soo much brother 🙏 ❤
@@mrsha Very Thanks bro ,but alot resistors are missing and I can't find 5k resistors 😕
Excellent video and very helpful. Like you, I got the model with all Chinese instructions. I was getting ready to throw it out and then found your video. Thanks for taking time to make this video and upload it.
The board is silk screened and it had schematics?
I finalized the construction but nothing works... it seems the batteries give power to the board but this power goes nowhere after. Can someone also help me with the resistors? Mine have different colors and I don't really know how they work. Thanks!
I struggled with that too, i looked on google for the color codes and looked at the board to see what goes where
Just use a DMM (Digital Multi-meter), set it to the Ohms function and measure the resistance of each resistor.
Not a bad little project build at all. There were only two things I didn't much care for! One of which was the lack of directions in chinese, and the other was that the two motors and housings are connected to the board using double sided tape, which made for a sloppy connection with a lot of play/wiggling.
Excellent video though 👍
Amazing videoa
Nice
انتبهوا من المعزوفات
incredible !
I did all that but the ldr sensing is really awful. I just ripped out the LDRs and going to add IR obstacle sensor modules instead. Going to try and drive the PNP transistors directly from them, without the LM393..
Very very much thank you
I have 8 of these kits for Venturer Scouts project this Video will come in handy, Thanks
Cool robot. I ordered one of these and its coming soon, just thought I'd see how it worked. I am a bit concerned as I got a cheap soldering iron and the entire metal tube thing connecting too handle is wobbly, the heating module is all the way at tip do you think I could add superglue between the handle and the metal piece?
/ELITE\ LCS so what happened?
Funny, I think I made the same two purchases as you. A washer or two on the soldering iron stand should help.
i just saw a notification that you replied lol. its been awhile since I've posted this comment and the first thing i must say, both things i purchased were what was expected. im nt usually that kind of person to just say that stuff is bad and i think that the stuff was "OK" but the soldering iron cought its self on fire practically
(heating module is fried) and the robot was not bad but the motors we're attached with tape which is not an ideal connection lol.
@@levistrnad2965 oh right, thanks for the head's up regarding the soldering iron. I should perhaps get something more reliable haha
Great video but unfortunately mine didn't work don't understand which resistor was which but thanks anyway you got me further than no instructiuons
just use a multimeter to check the resistors.....will be easy to fix if you want to.
segui el tutorial y funcionan las ruedas en reversa . En que me equivoque ??
Juan Santucho invierte los cables de los motores y listo
Thanks for help. But my pcb way is broke.
Hi, I have a classroom of 30 kids, and also 30 of these kits. However, all of the ones we have tried so far have failed. The photo resistors don't seem to be positioned correctly, and therefore the car cannot follow the line. Will you please help me? This is kind of urgent. Thank you!!!
To build this properly for the first time, you will need written instructions; I found them on the Internet 2 pages in length. I had one kit, and four of the resistors were the wrong value; it would never have worked! With the correct resistors in place, the little car worked perfectly the first time.
hello MR SHA can. u just explain me the principle and working of this toy car ? It would be of great help
Mine is not working properly I did all correct adjustments but my only one tyre is moving and none of the LEDs are glowing help plz
It look like plug & play. But it is so hard to do.😭 But you did it professionally with perfection. 😍👌
#Boss😎✌
I know that you mean. The sensor is based on LDRs..it going to be so prone to noise and ambient light saturation. So it's going to be hit and miss..
Thanks
My car is not working ...it is not working...what should I do
At what rate you buy it
Can you please name the items that you used
Seriously, don't solder like that!
:)
06:55. I like the way you show it NOT behaving well and how you adjust the thresholds to fix the issue:)
This all same resistor
Is it really works
Mau nanya min, ini saya uda ikuti cara pembuatan dari awal sampe akhir tap waktu pas jadi kok kenapa robot nya tdk mau mengikuti arah garis2 nya,padahal komponen saya uda taruh sesuai tutorial vidio tsb. Mohon pencerahnnya. Thanks
Belinya dimana kak
@@ahmadzakii9466 di ollshop ada kok
itu coba di putar vrnya kak, sesuai di akhir video
El motor no funciona, lo demás sí
My led sensor dosnt life
Z Azhar same, I think I did something wrong. I will try to fix it
Z Azhar LEDs have polarity. Respect the plus and ground , otherwise it electric signal is blocked. The D in LED is for Diod..