Tire Slowly Leaking Air? Check The Valve Stems!

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ม.ค. 2021
  • For More Info visit us at: 1aau.to/h/cnC/
    Did your tire lose air over a few days, even if it's brand new? Chances are the problem is in the valve stem! Dry, cracked rubber, or corrosion in the wheel, can break the stem's air tight seal, letting air out. Watch this video where Andy shows you all about it!
    Check out this playlist for more diagnostic videos:
    • Driveway Diagnostics!
    For More Info visit us at 1aau.to/h/cnC/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 48

  • @1AAuto
    @1AAuto  3 ปีที่แล้ว +4

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @talktome852
    @talktome852 10 หลายเดือนก่อน +6

    I'm happy that I chose to visit the car dealer because my colleague mentioned that it was as easy as attaching a new one purchased from the automotive parts store. I might have considered taking it to a local tire repair shop, but they likely wouldn't have been aware of how to prevent any harm to the sensor.

  • @gerardjones7881
    @gerardjones7881 3 ปีที่แล้ว +28

    If you don't have those stupid sensors in the tire you can swap the stem without pulling the tire off the rim.

  • @JP-kj9nt
    @JP-kj9nt 3 ปีที่แล้ว +21

    Great vid. Just what I needed to understand how the valve works. Thanks !!

  • @ablbn70
    @ablbn70 7 หลายเดือนก่อน

    thanks for tips

  • @trunkbangking
    @trunkbangking 3 ปีที่แล้ว +6

    Tip.when doing rubber tpms stems snip some cuts in the bottom of the stem.itll pop out better .i pop the sensor on before i pull it through so you dont have to worry about turning the stem after.but good video

  • @thundercatelgato
    @thundercatelgato ปีที่แล้ว +1

    i just learned something new today
    thank you 🤟🏼

  • @fjsea3
    @fjsea3 หลายเดือนก่อน

    great job with video and audio explanation

  • @Raoaudiocovers
    @Raoaudiocovers 2 ปีที่แล้ว +3

    Good one mate thank u

  • @joehyundaitech7961
    @joehyundaitech7961 2 ปีที่แล้ว

    re the stem removal tool do they sell the rubber piece separate ?

  • @ifell3
    @ifell3 2 ปีที่แล้ว

    Great video, subbed.

  • @ammrro
    @ammrro 4 หลายเดือนก่อน

    Easy to understand, Thank you

  • @ChandraSQLVideos
    @ChandraSQLVideos 3 ปีที่แล้ว

    Awesome video...

  • @angelmuniz-morales1008
    @angelmuniz-morales1008 3 ปีที่แล้ว +6

    It sucks when the valve stem core just pops off when you're driving, that happened to me 2 times on the same car last year...

  • @cmb6780
    @cmb6780 9 หลายเดือนก่อน

    Awesome! That our problem, Thanks!

  • @davelinkson1
    @davelinkson1 2 ปีที่แล้ว +3

    Good video, I have a problem with leaking valve stem losing about 5pounds in 10 days, (have done the soapy water test and it bubbles up if left for a while) its a tpm sensor valve and the stem has been replaced 3 times by the tyre fitter, and it's quite a pita, I'm gonna have to get it looked at again!
    Have been thinking, could a tyre sealant help in this instance which I could install or would that be a waste money for this.
    Am also think of replacing the whole tpm sensor along with the stem.
    Your thoughts please..

    • @1AAuto
      @1AAuto  2 ปีที่แล้ว

      +Dave Linkson Thanks for watching! If the issue has come back multiple times then the next step might be replacing it entirely!

  • @jacobstewart4738
    @jacobstewart4738 ปีที่แล้ว

    I have the tire sensors, but I don't have the tool to take off the tire from the rim. Can I still do this job by myself?

  • @firyadmaroof5745
    @firyadmaroof5745 2 หลายเดือนก่อน

    Thank you help full

  • @Rhosticks
    @Rhosticks 3 ปีที่แล้ว +1

    Good stuff! 👍🏾

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Rho Main Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @TaSwaTomorrow
    @TaSwaTomorrow ปีที่แล้ว

    Thanks brother. My stupid coworker/roommate didn't check this part before putting my tire back on my car. I was thinking I did something wrong like buy the wrong tire. But nope

  • @Evangelion543
    @Evangelion543 ปีที่แล้ว

    How much does it cost for valve replacement at a mechanic?

  • @ilynpayne7491
    @ilynpayne7491 2 ปีที่แล้ว +2

    I just decided to buy a new tire now it's been 5 months no problem

  • @joehyundaitech7961
    @joehyundaitech7961 3 ปีที่แล้ว

    where can I buy that wire brush attachment for my drill?

    • @Yogiandmetoo
      @Yogiandmetoo 2 ปีที่แล้ว +2

      looks like a gun cleaning brush so perhaps check out a gun shop.

  • @grantw.whitwam9948
    @grantw.whitwam9948 3 ปีที่แล้ว +1

    Nice.

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Grant W. Whitwam Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @Peppermint1
    @Peppermint1 ปีที่แล้ว +1

    Tire pressure sensors TPMS are causing havoc with these leaks.

  • @lokeshdeshwal5288
    @lokeshdeshwal5288 3 ปีที่แล้ว

    Sir plz tell which car brand engine is more reliable Honda or Hyundai??

    • @Christopher-115
      @Christopher-115 3 ปีที่แล้ว

      None

    • @chrisdiesel9424
      @chrisdiesel9424 2 ปีที่แล้ว +2

      Honda is the better out of the two.

    • @Acontador13
      @Acontador13 2 ปีที่แล้ว

      Toyota

    • @khunangkaro
      @khunangkaro ปีที่แล้ว

      ISUZU, regular maintenance at Tang Park Thailand. Never any problems within 10 years, 200,000km. Except loosing some air pressure over night, sometimes, irregular, 4 wheels. Now at rainy season the tyres (new and older) get beaten hard from unexpected wide deep potholes.

  • @JohnSmith-gu3ub
    @JohnSmith-gu3ub 25 วันที่ผ่านมา

    I just tightened mine with a socket wrench and it stopped the bubbles.

  • @brooklyn7941
    @brooklyn7941 ปีที่แล้ว

    Mines just unscrewed itself when I was going to get air ….jus what my luck and I couldn’t get help from nobody I had to take it while the tire was flat to a tire shop 🤦🏾‍♂️jus my dang day

  • @ronfazer2423
    @ronfazer2423 3 ปีที่แล้ว +3

    The core (Schrader valve) leaks many times, thats an easier fix.

    • @vernonpaigejr.1517
      @vernonpaigejr.1517 2 ปีที่แล้ว

      I found that out yesterday. Just twisted it on better.

  • @rogerborg
    @rogerborg 2 ปีที่แล้ว +1

    Is there nothing that Soapy Wooder can't do?

  • @joescheller6680
    @joescheller6680 2 ปีที่แล้ว

    not everyone has the senser you dont need to remove tire if you dont have one just break bead on valve side

  • @younigueone3299
    @younigueone3299 2 หลายเดือนก่อน

    My valve is leaking leaking but I do not see the air bubbles

  • @Charkatak
    @Charkatak 3 ปีที่แล้ว

    Will Nitrogen filled tire prevent this corrosion in the valve stem area from happening?

    • @rp9674
      @rp9674 2 ปีที่แล้ว +3

      Not an expert, but nitrogen sounds like 100% hype to me.

    • @c0mputer
      @c0mputer ปีที่แล้ว

      @@rp9674 it is

  • @milivoje922
    @milivoje922 ปีที่แล้ว

    New tire it is

  • @CmdrTigerKing
    @CmdrTigerKing 3 ชั่วโมงที่ผ่านมา

    no need for all the tool do it by hand

  • @markbury141
    @markbury141 8 หลายเดือนก่อน

    Rubber gloves for clean tire work? Why?