Very good ! Roll on part 3 as long as the rain keeps off ! Its great to see the possible problems that might be encountered when doing the rear hub bearings and if any extra bits of kit need purchasing. I improvised my own strut pry ( making a little metal wedge ) when I did my front wheel bearings but it would def be worth buying the set of 2 that can be used with a ratchet as you have I reckon
Hi Bevis, why have you payed all that money for an expensive ratchet gun and only used on the centre nut and struggle to remove the drop arm nuts and bolts. The mined boggles.
Great video! Thanks for the video. How hard is it to fit a reconditioned transfer box as mines been diagnosed with that as she’s constantly deep wining in gear and out of gear. Probably costs around £900 to do… so advice be welcome…thanks
Try Skan Automotive. They break Freelander 2s. Swapping it over is quite involved but someone on the FL2 off road facebook group did it the other week.
Hey brother, I had a question the torx bolt that holds the rear wheel speed sensor to the hub a single bolt , it was rusty and I stripped it out and need to order a couple , i cannot find the part number on any diagram, do you happen to know it , thanks
Good idea! Sadly the other parking spaces are not mine. My neighbours are ok with me occasionally working in the space next to my car but would probably frown if I used up three spaces!
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (2/4)](http://i.ytimg.com/vi/GgeGQOP10RQ/mqdefault.jpg)
Another top video Scott. As someone else without a garage I was feeling your pain during the normal British summertime weather ;)
Thanks Andrew!
Very good ! Roll on part 3 as long as the rain keeps off ! Its great to see the possible problems that might be encountered when doing the rear hub bearings and if any extra bits of kit need purchasing. I improvised my own strut pry ( making a little metal wedge ) when I did my front wheel bearings but it would def be worth buying the set of 2 that can be used with a ratchet as you have I reckon
Loved the way he struggled with every bolt when he had a perfectly good impact gun that he'd praised highly then didn't use 🤔🤔🤔
Yep! This has already been pointed out. Not sure what I was thinking!
Hi Bevis, why have you payed all that money for an expensive ratchet gun and only used on the centre nut and struggle to remove the drop arm nuts and bolts. The mined boggles.
You are absolutely right, I really should have used the impact gun on the other bolts too. Wasn’t thinking.
Great video! Thanks for the video. How hard is it to fit a reconditioned transfer box as mines been diagnosed with that as she’s constantly deep wining in gear and out of gear. Probably costs around £900 to do… so advice be welcome…thanks
Try Skan Automotive. They break Freelander 2s. Swapping it over is quite involved but someone on the FL2 off road facebook group did it the other week.
@@BeavisPits great thanks Ill take a look. Keep up the brilliant Chanel
sorry i cant stop laughing every nut bolt or screw you undo sounds like your in the worlds worst pain lol even with a knuckle bar ?
I’ve reached that age
Hey brother, I had a question the torx bolt that holds the rear wheel speed sensor to the hub a single bolt , it was rusty and I stripped it out and need to order a couple , i cannot find the part number on any diagram, do you happen to know it , thanks
Sorry, I don’t but it is just an M5x12mm bolt, so you should be able to find a replacement easily, try ebay
www.ebay.co.uk/itm/224909198717?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=c2fDk4l7SOu&sssrc=2349624&ssuid=3rl5rwijqno&var=523779903440&widget_ver=artemis&media=COPY
Get yourself a tarp or gazebo. You got plenty of room.
Good idea! Sadly the other parking spaces are not mine. My neighbours are ok with me occasionally working in the space next to my car but would probably frown if I used up three spaces!