I'm glad you raised the point about the line, I couldn't get this product because having that rub against my arm and wrist would be so annoying. Your point on playing snake in speedsoft is something I never considered, and now I can see the value in having this product so you can get lower to the ground. Great review!
If you get the TM spec, TM mags will work If you have an AW spec, AW will best. The mags I installed specifically for my monk is a guarder aluminum base mag. That’s the only other base I know will work for tm stuff
Ok. You cleared up some things for me. However. I can’t find anything if it would work on a echo 1 Wolfsbane. If anyone has input please share. I’d like to do this with the current pistol.
Mags: both guarder aluminum mag from Airsoft extreme and nine ball mag gaskets from anywhere Hicapas: I shop locally first, then sponsors, then websites (blowback masters, lacapa customs, sometimes evike, and Asian websites if it’s a rare product)
I just bought my first high capa and I want to get into hpa and idk if I can because my gun is co2 , be awesome if you can help me understand how to get started
3 things you need to do before going hpa: 1) find out if your pistol is compatible with both green gas and C02, generally most blowback pistols will operate with both, but there are exceptions. 2) go to your local shop and (if they allow you to test) try different branded mags (TM, AW, WE, etc.) to see if they are compatible and will fire/feed bbs through it. If it doesn't cycle all the way or it doesnt shoot anything out, you wont be able to hpa 3) let's say #2 works, you'll need to start getting stuff to hpa your capa. You'll need M4 to Hicapa adapter, a SLP tank (ninja branding is used everywhere), a SLP regulator (most people start out with a Amped Airsoft Regulator, i did too), a line, and a gas mag compatible with the capa and the adapter. Your local shop should have some knowledge on this stuff and the equipment needed but follow through the first 2 to get a general idea of your capa. If you want a setup that will for sure work (if your capa does take gas mags and WILL shoot bb's through), my very first setup was: -Primary Airsoft TM M4 to Hicapa Mag adapter -Ninja 48 ci 3000 psi SLP tank -Amped Airsoft Regulator and Line -Standard 5.1 TM Magazine Hope this helps.
No it doesn’t, there is a part in the video that shows mags compatible, but it’s basically anything that is standard m4 mag. It’s just fitted better for the pts mags
Depends, your blowback unit o-ring may be dry; you might be low on air or low psi and you need to up it; or your mag gasket may be catching onto the nozzle. It really depends on the setup but those are usually the common ones
I'm glad you raised the point about the line, I couldn't get this product because having that rub against my arm and wrist would be so annoying.
Your point on playing snake in speedsoft is something I never considered, and now I can see the value in having this product so you can get lower to the ground.
Great review!
thanx for the review !
Thank you! and I’m trying to get a high capa and I’m jealous of how many you have
All in love for the sport 🔥
anime capa grips and kpop intro - instant new subscriber
oh my god and he has the magpantsu too
Could we get a vid on ur hi capas? They look dope
Im in love with your hicapas 😫
What is that compensator on the blue and silver capa 😍
so what magazine did you use for the monk m? I'm going to get the monk m but I have no idea what magazine goes at the top of the adapter
If you get the TM spec, TM mags will work
If you have an AW spec, AW will best.
The mags I installed specifically for my monk is a guarder aluminum base mag. That’s the only other base I know will work for tm stuff
@@full_otto7598 thanks bro
Can you please do a install guide. I can’t get the long screw in BC it’s a weird angle
Here’s a link from monk themselves: th-cam.com/video/Yk-OIvydh5A/w-d-xo.html
I’ll make a small video but it’ll be about the same as this one
Ok. You cleared up some things for me. However. I can’t find anything if it would work on a echo 1 Wolfsbane. If anyone has input please share. I’d like to do this with the current pistol.
Where do u get your upgrades from?
Mags: both guarder aluminum mag from Airsoft extreme and nine ball mag gaskets from anywhere
Hicapas: I shop locally first, then sponsors, then websites (blowback masters, lacapa customs, sometimes evike, and Asian websites if it’s a rare product)
I just bought my first high capa and I want to get into hpa and idk if I can because my gun is co2 , be awesome if you can help me understand how to get started
3 things you need to do before going hpa:
1) find out if your pistol is compatible with both green gas and C02, generally most blowback pistols will operate with both, but there are exceptions.
2) go to your local shop and (if they allow you to test) try different branded mags (TM, AW, WE, etc.) to see if they are compatible and will fire/feed bbs through it. If it doesn't cycle all the way or it doesnt shoot anything out, you wont be able to hpa
3) let's say #2 works, you'll need to start getting stuff to hpa your capa. You'll need M4 to Hicapa adapter, a SLP tank (ninja branding is used everywhere), a SLP regulator (most people start out with a Amped Airsoft Regulator, i did too), a line, and a gas mag compatible with the capa and the adapter.
Your local shop should have some knowledge on this stuff and the equipment needed but follow through the first 2 to get a general idea of your capa.
If you want a setup that will for sure work (if your capa does take gas mags and WILL shoot bb's through), my very first setup was:
-Primary Airsoft TM M4 to Hicapa Mag adapter
-Ninja 48 ci 3000 psi SLP tank
-Amped Airsoft Regulator and Line
-Standard 5.1 TM Magazine
Hope this helps.
What kind of m4 mags can you use does it have to be pts epm-s ?
No it doesn’t, there is a part in the video that shows mags compatible, but it’s basically anything that is standard m4 mag. It’s just fitted better for the pts mags
Love the way we give shit 😂 great review tho
🤔 so you went with the colorful bikinis 👙 for the mags.
my monk m adapter shoots 1 bullet then starts to leak air, what do i do???
Depends, your blowback unit o-ring may be dry; you might be low on air or low psi and you need to up it; or your mag gasket may be catching onto the nozzle. It really depends on the setup but those are usually the common ones
@@full_otto7598 thanks
Monk m seems to have leaking problems
Hi friend!!
Hey friend :)
Can u please sell me one