Thank you for a clear and precise video, Steelerboiy. You could benefit the Flightsim community hugely by doing a similar video on configuring most of the other flight controls using FSUIPC. Thanks again.
Good tips, but only one issue I have with this....this is a setup for full reverse or none at all. Many aircraft do not use full reverse thrust on landing for noise abatement, or other various reasons. There is an LUA plugin you can use that can activate reverse thrust and use an axis to control the level. Pretty cool!
hello very good video, now I want to ask you a question: you know how to configure the buttons for the IDLE CUT (the levers under accelerator 1 and 2) that I want to do manually and I could not. From already thank you very much
Great job! Thank you. Could you please do a video on how to calibrate flaps with specific detents on the paid/registered version of FSUIPC? I have modified my Saitek throttle quadrant, and would like to use the far right lever for flaps (I already have a marker for the specific detents). I mainly fly the B757/B767 on FS, so that means 7 detentes (0-1-5-15-20-25-30). I read the FSUIPC4 user manual, but can't make heads or tails out of it. There are like two how-to videos on this right here on TH-cam, but they're not in English, and the video quality is very poor, and the other one isn't very specific at all and too fast. Thanks again for this how-to video. Kind regards, Larry
Great video. Very handy and I enjoyed your earlier one on setting up FSUIPC. The best video I have seen. One problem I have with this reverse thrust video is that I have a Saitek double throttle quadrant and when I use buttons & switches in FSUIPC the reverse thrust works fine. However when i use reverse thrust the view immediately changes from my virtual cockpit view to the Outside/Spot view. Which is disconcerting when you're rolling down the runway. Have you struck this problem?
Sir, thanks again for a very clear and simple tutorial. What if i have SPAD as well as FSUIPC? where can I configure these? Do i need both to configure my saitek panels like 2 yokes, 2 rudders pedals, radio panel, switch panel and AP panel. I also posted a question in your SPAD video; if my panels have default drivers installed, would you be in a position to explain how to uninstall and install using SPAD? Thanks & God Bless!
John Odhiambo and a big thank you for your comments. You need to configure the reversers in FSUIPC. I would advise you to have the registered version of FSUIPC along with SPAD Next for your controllers. I'm glad you are enjoying the videos and hope they are proving useful 😃
Hi All, this was very informative, however with CH Throttle Quadrant moving the lever from the detent does not register as a switch? Anybody been able to figure that out?
Thank you for a clear and precise video, Steelerboiy. You could benefit the Flightsim community hugely by doing a similar video on configuring most of the other flight controls using FSUIPC. Thanks again.
Great tutorial man, you went to point simply, well done.
Finally someone explains it! Thank you very much!
Dirty Sanchez lol thank you so much, I'm happy the vid proved helpful!
Que aula sensacional, meus reversos perfeitos agora, muito obrigado e parabéns voce é o cara..
I love your videos!!! Great job with this one!
Sincerely, Henrik
Henrik _Official thank you so much, glad you like the videos. Thank you also for subscribing 😃👍
Good tips, but only one issue I have with this....this is a setup for full reverse or none at all. Many aircraft do not use full reverse thrust on landing for noise abatement, or other various reasons. There is an LUA plugin you can use that can activate reverse thrust and use an axis to control the level. Pretty cool!
tasev1 hiya, thank you for the heads up on that, very much appreciated! :)
Found it - it's called FSUIPC Throttle manager. Type that into Google and it'll be the first hit.
tasev1 thank you so much! :)
hello very good video, now I want to ask you a question: you know how to configure the buttons for the IDLE CUT (the levers under accelerator 1 and 2) that I want to do manually and I could not.
From already thank you very much
Great job! Thank you. Could you please do a video on how to calibrate flaps with specific detents on the paid/registered version of FSUIPC? I have modified my Saitek throttle quadrant, and would like to use the far right lever for flaps (I already have a marker for the specific detents). I mainly fly the B757/B767 on FS, so that means 7 detentes (0-1-5-15-20-25-30). I read the FSUIPC4 user manual, but can't make heads or tails out of it. There are like two how-to videos on this right here on TH-cam, but they're not in English, and the video quality is very poor, and the other one isn't very specific at all and too fast. Thanks again for this how-to video.
Kind regards,
Larry
Great video. Very handy and I enjoyed your earlier one on setting up FSUIPC. The best video I have seen.
One problem I have with this reverse thrust video is that I have a Saitek double throttle quadrant and when I use buttons & switches in FSUIPC the reverse thrust works fine. However when i use reverse thrust the view immediately changes from my virtual cockpit view to the Outside/Spot view. Which is disconcerting when you're rolling down the runway. Have you struck this problem?
Another excellent videop but still waiting to find out how Throttle quadrants are fitted to a Saitek Pro Yoke that has only one PS2 (mini din)?
Hi ! Do you have an idea to do the same with spad next because fsx dont recognise my yoke system !!
Sir, thanks again for a very clear and simple tutorial.
What if i have SPAD as well as FSUIPC? where can I configure these? Do i need both to configure my saitek panels like 2 yokes, 2 rudders pedals, radio panel, switch panel and AP panel.
I also posted a question in your SPAD video; if my panels have default drivers installed, would you be in a position to explain how to uninstall and install using SPAD?
Thanks & God Bless!
John Odhiambo and a big thank you for your comments. You need to configure the reversers in FSUIPC. I would advise you to have the registered version of FSUIPC along with SPAD Next for your controllers.
I'm glad you are enjoying the videos and hope they are proving useful 😃
Good video, do u have any others for pedals, yoke or joysticks setups in p3d or fsx? Thanks
Thanks works perfectly
Is this idle reverse or full reverse? Is it possible to set idle reverse?
Thanks but unfortunately the repeat function doesn't seem to work for me
Hi All, this was very informative, however with CH Throttle Quadrant moving the lever from the detent does not register as a switch? Anybody been able to figure that out?
yes, u r right. Thats why I bought the Saitek mentioned in the video.
How did you connect the two powers? since the goat has only one entrance
Second is USB
But how did you tell FSX that you got 2 throttle levers?
Fresh Dumbledore each slider is recognised individually, so can be configured separately.
Steelerboiy Okay thanks😊
or you could just use the fsx settings to do it
No you can't
no hearr from you from a while? hope you are hell, cheers for all your help with saitek stuff! ( oop's logitech as of now!)
Christopher Crosby thanks for the msg, and yes I'm good thanks 😃👍 Been taking a lil break from YT, but I need to get back into it!!!
Does this work on msfs2020?
Thank you!!!!!
tydaftpk38 you're very welcome. Glad you found it helpful :)
You sound like my PE teacher haha
Ta!