Santa Brought New Parts For the Blaster! + Case Prep & Plastic Restoration
ฝัง
- เผยแพร่เมื่อ 24 ธ.ค. 2022
- Santa Brought New Parts For the Blaster! + Case Prep & Plastic Restoration
#2stroke #yamaha #build
Merry Christman! Thank you for taking the time out of your holiday to watch my video and hang in the garage with me 🤘
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Mini Buffer - amzn.to/3WFK4np
Mothers Wax - amzn.to/3PU3S49
Parts Washer - amzn.to/3GhGuKC
Blind Bearing Puller - bit.ly/3WJSWbs
Blow Torch - amzn.to/3jiZvU0
Milwaukee M12 Impact Drivers - amzn.to/3WCwLUy
Vise Grips - amzn.to/3C0VbiZ
Orbital Sander - amzn.to/3I3iKLS
Maier Front Fenders (Black) - bit.ly/3HncNZL
Maier Hood (Black) - bit.ly/3PhH9P7
Maier Tank Cover (Black) - bit.ly/3FF5dZ7
Trail Tech - bit.ly/3PfPxyJ
Tusk Front Rotors (2) - bit.ly/3HsyE26
Tusk Rear Rotor - bit.ly/3W6YwnZ
Tusk Swingarm Bearing Kit - bit.ly/3FHKpQI
Front Master Cylinder Kit - bit.ly/3FE70wz
Tusk Tie Rod Ends (2 Kits) - bit.ly/3YfmjUU
Tusk Complete Gasket Kit - bit.ly/3FmWZU4
Tusk Oil Seal Kit - bit.ly/3iTmQLX
Tusk Axle Bearing Kit - bit.ly/3hklQjx
Tusk Front Wheel Bearing Kit - bit.ly/3FkEMXj
Tusk Flywheel Puller - bit.ly/3UND6LI
Tusk Sintered Pads (Front and Rear) - bit.ly/3uGl0Rb
Petcock Rebuild Kit - bit.ly/3iVW4CI
Tusk Carb Rebuild Kit - bit.ly/3uF9C87
Tusk Clutch Cable - bit.ly/3uHtYxK
Tusk Oil Change Kit (any oil) - bit.ly/3YeXvMz
Tusk Super White Bulb - bit.ly/3uJlwhs
Chain Roller (Upper and Lower) - bit.ly/3YhkdUc
Tusk Brake Lever - bit.ly/3VGEtwZ
NGK Plug - bit.ly/3PgDbWY
DID 520 Chain - bit.ly/3Phocfo
Front Sprocket (13T) - bit.ly/3W7rXX5
Rear Sprocket (40T) - bit.ly/3iW7W7L
Tusk Silencer Packing - bit.ly/3UTofzk
Tusk T-10 Bars (ATV Sport Bend) Any Color - bit.ly/3hg2iN4
Tusk Quick Adjust Clutch Lever - bit.ly/3Br1Cvg
Torc1 Lock On Grips (Any Color) - bit.ly/3uCYSat
A-Arm Bushing kit - bit.ly/3uI3k7M
Heel Guards - ebay.us/GmrbLb
Clutch Kit - ebay.us/tSjk9L
Chain Guide - ebay.us/6tvrID
Rear Caliper Rebuild Kit - bit.ly/3iTLf42
Billet Gas Cap - ebay.us/2bwIY6
Tail Light With Bracket - ebay.us/p4gSnL
Wire Harness - ebay.us/FpxxHD
Black Shifter - ebay.us/U75ySh
Swing Arm Dust Caps - ebay.us/UEKomS
Oil Injection Block Off Kit - ebay.us/g2Y7zC
Billet Clutch Basket - amzn.to/3vdxwI6
Clutch Inner Hub and Pressure Plate - amzn.to/3jxJmKM
Magic Eraser Pads - amzn.to/3PRv6bC
Cloralen - amzn.to/3C1ZbzH
SPONSORS/COMPANIES I TRUST
Rocky Mountain ATV MC - bit.ly/32OHs02
Bonehead Performance Coatings - boneheadperformance.com/ (Mention my name and get 10% off)
Rocket Ron - www.rocketronracing.com/
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
Urmosi - urmosi.com/
Power Sports Nation - www.powersportsnation.com/
Vito's Performance - www.vitosperformance.com/
MotoBlast - www.njvaporblast.com/
Zoom Zoom - zoomzoomparts.com/
MERCH - michael-sabo.creator-spring.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video. - ยานยนต์และพาหนะ
Merry Christman! Thank you for taking the time out of your holiday to watch my video and hang in the garage with me 🤘You all ROOOOOCCCK!!! 🤘🤘🤘
You need to get a manual impact screw driver. You will never again strip Philips head fastners. They are $20 on Amazon. Best tool ever. Way way better than a battery operated impact.
Once you use it to lose the first Phillips head fastener. You will never use anything else to do the job again.
(Subject matter from last video)
Can of sc1 after cleaning plastics lol. Shine and protection
What else would we be doing sitting with family fuck that
@@FreedomInc I appreciate the tip man! I actually have one, I just don’t use it often. It certainly is a great tool though!
@@trevordarnell673 aweee yeaaa plus then it smells great!
Your ability to capture these builds on video and edit them in a way that is so entertaining to watch is amazing. Your knowledge on how to rebuild the quads. Specifically, the engines is equally amazing. Thank you for providing the entertainment!
Very nice Christmas present
I appreciate you watching man!
Idk how you only have 180k subs it blows my mind. You are by far the best when it comes to ATV rebuild/resto content. Some times I even put your vids on to help me fall asleep ASMR ATV 😂
Wow a video on Christmas Day. Couldn't ask for more. Thanks for all of your hard work man. The atv world wouldn't be the same without you. Merry Christmas
I appreciate that man; thank you for watching and supporting and Merry Christmas!
I'll give you a dollar 2.98 on the 2nd Tuesday of next week for the old bearings and seals. It's very awesome to see you getting to live your dream. Merry Christmas brotha.
I spent more on my 1999 blaster upgrading it than it costed brand new.. 😮.. I had it since new and it finally got all the love it desperately deserved. Went full hydro brake setup with yfz front end components.. didn’t touch the engine since it has always been a strong runner and never needed a rebuild. I passed it on to my 13 year old daughter. She learned how to ride manual this past summer and is loving her fresh machine!! Cool video series here Sabo. Always a good day when you drop a new one!! Hope you and your family have a merry Christmas! Cheers from Wisconsin!
One of best Christmas presents this year was this video thank you Mike merry Christmas
I’m in Australia and we have had the coldest beginning of summer in my life
Ohh men, thanks because I have a blaster and I have destroyed it and it has been difficult for me to find the parts, but thanks to this video I can get to repair it thanks for your video they are very entertaining.
Merry Christmas 🎄 The build is looking great brother
Great video. Would love to see a short one about how you modified your tusk stand to work with a stronger jack.
This stuff IS so cool, and we are glad you share it with us. It is really exciting to see the new parts you get and you do such a detailed job refurbishing everything. Very fun to watch. Thank you Micheal!
possibly the best thing a youtuber can do today is bless us with their content! Merry Christmas thanks for the early upload!
Dude I’m 14 and this guy is my favorite TH-camr. Micheal sabo is the best!!!!
Can't wait to see those cases come back and the engine build
All new parts are so ssswwweeeeettt ! So envieous of you with all the suppliers . Keep up the great vids .☮ PEACE ☮
Man, what a job you did on those plastics. Great job brother you brought them back to like new condition.
Merry Christmas everyone. I hope everyone’s projects get some nice gifts this year.
Merry Christmas to you too man; I hope you get some good stuff too!
I absolutely love this blaster series.. it might be my favorite series so far
Merry Christmas Michael, I’ve been watching your channel for awhile and I would love to see you do a ltz400 build.
Merry Christmas Mike! hope you and yours a happy new year! cheers from Alaska 👊
Definitely will love that tool you will be able to save just about any plastics that aren’t cracked
This is gonna be sick! Just got myself a Maier carbon fiber nose piece for mine!
Hell yea man!
Best christmas gift ever. thanks sabo!!
Nice of you to show the younger generation with a little work they could clean up there machines and not have to buy new
Novus Plastic Polish is the best thing I've used to restore plastics. Restored a KX500 to almost new OEM by wet sanding and plastic polishing.
Great context I’m definitely excited to see it when it’s done. Merry Christmas Mike
Just got home and was surprised you put another video on this build. Thank you Mike for putting so much effort in this top notch video for Christmas holiday. It was worth the insults from my wife to watch this video with so much enthusiasm. I love the way you showcase all the tools you use, so useful on deciding which tools on need to add to my tool list to get.
Merry Christmas to you and your whole family.
Great video! Keep up the good work
Merry Christmas Michael! You really have inspired me to do everything the right way regardless of the work it takes. You get all your videos out fast and efficiently it seems like. I know it’s a pain to edit and motivate yourself to make every video but I love watching the builds. Keep killing it and ripping 🤙🏼
Dude, awesome feedback; it makes my day hearing stuff like this! Glad I can inspire you and thank you for supporting and watching! Merry Christmas 🤘
@@MichaelSabo of course man! I rebuild sportbikes, but I love atvs and watching your work on atvs is satisfying 🤙🏼
That is going to be a very nice blaster bud MERRY CHRISTMAS TO YOU AND YOUR FAMILY THANKS FOR THE VIDEO!!!
Merry belated Christmas Lannie! Thanks as always for all the support and comments man!
Awesome content again. So excited for the Blaster build. I hope one day you can find some land to build a nice shop with living quarters above. Your garage is slowly shrinking.
Love that you put out a video on Christmas for us
Thx for the hard work in doin so and also thinkin about the fans
First black friday and now Christmas with Mike? There is a Santa!!!! Merry Christmas Little Bro!!!!
Haha, thank you for the love as always big bro; Merry Christmas!
"one foot in the casket and the other on a banana peel" I think is my new favorite saying lol.
Just got finished rebuilding a 04 blaster of my own, kids love it, looking forward to the Vito's big bore kit video, looking into doing one myself, keep up the good work on vids!
Congratulations you have been shortlisted among my lucky winners
Use the name above to claim your prize...
@@Tel-egram_me_kubz_scouts2 on Christmas day you are pulling thos scamning get a life
For that bearing puller you gotta grind them. The fittings have like ramps to the lips, grind the ramps down so the lips are straight and taller, it’ll grab 100x better. The cheap Amazon sets are all ramped like that but if you get a good set from like OTC they’re ground/shaped the correct way.
I absolutely love your videos. My 3 year old son and I watch them together and it’s one of the best parts of my day. When you pop up on the tv my son yells hi Mike! Followed by brapp brapp sounds and it’s just the best.
@@michaelsabotv tell me you’re not Mike Sabo without telling me you aren’t Mike Sabo
Merry Christmas. You’re a true artist at the top of his craft!! Nice work as usual.
Merry Christmas Jason; thank you for the love on my videos!
I might try a mothers polish cone on a drill for some of the nooks and crannies. Might be quicker with a dedicated polish vs cleaner wax too
Me gusta mucho la Yamaha 200❤🇩🇴🇩🇴🇩🇴🇩🇴🇩🇴
Merry Christmas Mike and family God speed and blessings for a better new year!
100%! 2023 is going to be the best year yet for all of us 🤘 Merry Christmas!
Wow I can't believe one of my top 3 favorite TH-camrs actually responded to me thanks alot Mike....Joe from jersey.
Salutări 🖐️🇦🇩🇦🇩👍.... CRĂCIUN FERICIT!!!!!!
This should be a pretty nice looking blaster when it’s done. Great work Sabo.
I’d wet sand the plastics. I had a banshee that was all oem and the red plastics were white. I started at a lower grit and worked my way to a 2000/3000 grit. Then hit them with some cooking oil on a paper towel and let it sit in the heated garage till I was done with the rebuild. Bike came back like brand new and plastics were super clean and shiny . Didn’t even mess with the oem graphics
Another awesome video. Very interested in Blaster content. Keep up the good work Boss
Another great video. I love the way you show your struggles and solutions. Many tubers would edit those out, not the Sabomeister
Hey Mike Merry Christmas 🎄
Hey man try some Mother's Aluminum polish on plastic body parts,. It works great for a lot of stuff.
I have seen people use it for plastic headlights and taillights with good results, and I had used it for polishing aluminum and even some gold jewelry in the past and was always satisfied with the results.
Thank you for your videos.
Tim from Wisconsin.
Thank you Sabo I needed this today while I’m at work on Christmas 🤬
On the grind bro! You're a savage setting yourself apart from all the others who are not working
Am I the only one that thinks that the blaster would be a cool halo theme quad?
Extended arms and axle on these look so cool and perform great. Something to think about when you do the 240 kit
Great video! I just ground up rebuilt a Blaster for my wife. Fun little quads.
I love Vito's stuff 😃
31:49 ; Jeeze man, garage full of awesome ATV's or not invite me over for dinner!! LOL
Rock on Merry Christmas
Merry Christmas, thanks for taking the time to make Christmas that much better.
Great job mike, love the videos, I’m currently getting ready to restore 3 400ex, and a 98 fourtrax 300 Honda, anyway great job and hope you ,and your family had a merry Christmas, hope all is good , can’t wait to see the finished blaster,
Solid content as always! 🫡
Christmas uploads are the best
its nice idea with the buffer but you really need the speed of a hat drill to get the plastic almost melting to bring back the gloss.
Merry Christmas and keep up the awesome work!
Digging that little polisher
Harbor freight for the win. Once again
I knew you already know your shit, seeing the PSU mug solidified that. WE ARE!!!! Amazing build.
Merry Merry Christmas 🎄 awesome to see you on a special day you Rock Mike!!!! Hopefully you were good with Santa Claus 😎
Bro I don't even have a quad never had one but really enjoy watching your vids I'm always checking for a new one to upload. Merry Christmas
Merry Christmas great video!
Today on Christmas it was 78 at the beach in California. But it was a good day. Lately it’s been actually getting into the low thirties at night to the point where there’s ice warnings. I’m originally from Ohio so I’m used to all the snow and rain. But not people here! Hope you
Had a merry Christmas and hope that this project continues to go well!
Have to say that from the Uk, and not even particularly an ATV or Quad fan… but I’m seriously addicted to this channel… there’s a lot to be said about likeable people and presenters and although filmed in a home garage, this is one of the most polished and brilliantly put together shows on You Tube… great content out together by a passionate guy that really knows his stuff and makes everything he does incredibly interesting. Keep up the great work and looking forward to watching the progress of all the projects in 2023 🎉
Great job 👏
Getting a new led light bulb it would be very useful
Love seeing a new video especially on the holidays!
I appreciate you watching it man!
8:54 WOW!!!
Great job! I did a mojave a couple of years ago and ran into a lot of the same issues. It's great to see these old sport quads brought back to life. I had to do all the bearings as well
Not only are your videos informing but good background music and funny too
Damn christmas video dedication! Happy holidays!
Very cool, I'm glad to see you making progress on the blaster. Reminds me of my teenage years. Wish I didn't sell it. Oh well remember it we'll watching you working on yours. Thanks for another great video. Made my day Merry Christmas ☃️
This is going to be a great build. If you are going to be painting the clutch cover you can use jb weld as filler in the gouges. I have also seen jb weld used as filler before powder coating. I know you like to make your builds look there best and maybe this can help
That's not a bad idea using the JB weld. I think I am going to leave it vapor blasted and see how it looks at first. Thank you for the idea and Merry Christmas!
@@MichaelSabo Merry Christmas to you. Maybe on a future project that tip will help.
Great video Merry Christmas
Hope you had a great Christmas brother! God bless you always!!
Merry Christmas man you’ve inspired me I just did a full rebuild on the yz125 in my profile picture and your video on your yz of the Same generation was a huge help!!
Merry Christmas man; that's awesome! I'm glad my videos could help 🤘
I used your discount at Bonehead. They powder coated my 85 kx500 frame and hubs. They look great 👍
You've inspired me to rebuild a 97 yz125 thank you so much Mike!!!!!!!!!
Mike you gotta try Cerakote Trim Coat. It will make your plastics look new. It is super durable and long lasting. I used it on my Raptor and my 400 ex and it is amazing.
Gotta
Love Yamaha quality man built to last!
How did Santa carry all that stuff I hope he got to eat steak instead of cookies and those plastics came up great Benji was laughing when you couldn't get the bearings out because Santa didn't bring him anything 🎅😢 looking forward to the next episode Mike,
Merry Christmas my friend!
Love the new build and your humor is great…. 😎💪🇺🇸
Love the Blaster content. Make me want to get one for a rebuild project. I had blasters growing up as a kid.
I support it man! Good luck in your project if you do one!
I love this series
Glad you're enjoying it man!
Merry Christmas!! That SPTA looks very similar to Milwaukee's version of buffer/polisher. Great video and build series as always.
Love your videos mate
Polish and wax are different things, try an automotive paint polish on the plastics with the same application process that you used with the wax and it will be a lot easier and a lot longer lasting.
Keep it up!
Merry Christmas Mike!
Your dad is awesome!
I bought a used 1989 Blaster when I was a kid, I rode that thing everywhere until I out grew it.
Merry Christmas 🎄 big Mike
Heck yeah! MERRY CHRISTMAS! Love the builds and I can't wait to see the finished product big dawg!
Marry Christmas bro! Thanks for following the build 🤘
Another great video man. Merry Christmas and stay warm back there.
Watching you tear down or rebuild motors is so satisfying!! Love it Bro!!!
I've got a trailtech vapor for my bike and sometimes the speed gets a little messed up when accelerating but it seems pretty accurate at constant speeds.