@@freelectron2029 sampling rate is wrong it's way too compressed. Last time I heard something that bad was the first time I tried my sound blaster card in the 90's and experimented with the sampling rate to see how low I could go..
Here is a question i had for about 9 years - when i do a 3d sketch. Why does a whole complex sketch turn overdefined when i add one dimension to a newly drawn line which has no other relations? Same question for starting in a 2D sketch with a fully defined slot, which turns overdefined when i try to mirror or linear pattern it. Its underdefined and draggable at one point - I add one new 1D constraint and it all turns overdefined.
Good luck if you need something that is not provided by the tool ... Can you do stuff programmatically in SolidWorks, like add arbitrary attributes to points / objects and transfer them between them..
Hopefully someone can help me. I am trying to make an aircraft wing. I have created the four sketches. I get an error that tells me the loft cannot be made because it would create self-intersecting geometry!
Good day Sir I have got a very complex loft that I am not able to solve. It is the cowling of my airplane that I am trying to make it new style. Would you be able to give me a help? Of course I could forward the sketch and guide curves. It is very complex! Thanks Regards Gianluca
Thanks Steven. The Tutorial was one kind of reminder. Always good to see the differences once again.
really clear & easy to understand! Thank you for the video!
Very nice presentation of a very interesting product. I will not let a tradesman into my house without one!
Very good mate, thank you. A better microphone would make it even better.
THANK YOUUUUUUUU VERY MUCHHHHHHHHH !!!!!!!!!!!!! KEEP GOING PLEASE
Thanks, it was very helpful tutorial.
utilised and enjoyed wNice tutoriallst increasing in value.
Nice one but I wish you went into Guide Curves too while you were at it!
Very useful demo .Thank you very much
a better microphone would be absolutely worth it for you
English is not my native langage but I perfectly understood what he said so his microphone is perfect for me.
courier me
@@Quatuux then you might have something wrong with your hearing
@@freelectron2029 sampling rate is wrong
it's way too compressed.
Last time I heard something that bad was the first time I tried my sound blaster card in the 90's and experimented with the sampling rate to see how low I could go..
@@xl000 lol sound blaster card. thats a blast from the past. thanks for reminding me )
Hi, Very nice useful video.Thank you so much.
awesome, thank you very much!
Which Screen Recording software you are using.
Really a nice tutorial. Learned a lot. Slightly improved commentary would help many...
Hi dudes, i got an issue, i can't select close loop and it isn't highlighted, any suggestions ?
Here is a question i had for about 9 years - when i do a 3d sketch. Why does a whole complex sketch turn overdefined when i add one dimension to a newly drawn line which has no other relations?
Same question for starting in a 2D sketch with a fully defined slot, which turns overdefined when i try to mirror or linear pattern it. Its underdefined and draggable at one point - I add one new 1D constraint and it all turns overdefined.
And you never got an answer 3 years later
@@therealthreadkilla im guessing there are hidden relations which only work sometimes
Thank you!
I have issues with this, it only selects one closed loop and I can't select the other one, i sketched similar shape as you have...any suggestions?
I want to create some bent foil like tabs on an electrode any suggestions?
Good luck if you need something that is not provided by the tool ... Can you do stuff programmatically in SolidWorks, like add arbitrary attributes to points / objects and transfer them between them..
Geat Stuff Mate
Looks easy enough
Hopefully someone can help me. I am trying to make an aircraft wing. I have created the four sketches. I get an error that tells me the loft cannot be made because it would create self-intersecting geometry!
I have the same problem. Whatever I try.
Good day Sir
I have got a very complex loft that I am not able to solve.
It is the cowling of my airplane that I am trying to make it new style.
Would you be able to give me a help?
Of course I could forward the sketch and guide curves.
It is very complex!
Thanks
Regards
Gianluca
Can you guys do one on basic pool shapes with angles
can anybody tell me how he make that feature at 20:09 .....thanks
Pretty late but its called surface sweep. Go into your surface tab and select sweep
Surface Sweep, selecting a group of parameters (curves)
thanx. it's pitty for such a sound
Did you swallow your microphone?
just ca off for a spliff to watch tNice tutorials then I'm back on boi
Way to call out.... lol