Been tempted to an AIO many times but never pulled the trigger and done it. Cant deny that your set up lights up like Vegas Strip ! Thanks for sharing, Mike. Appreciated as always
Struggling with this cooler as well and looked up his motherboard legend, he plugs the first one at the bottom into the Chasis fan or CHA_FAN and the top which are the two radiator fans into the CPU_FAN
@@UltimateTechHub wait how do You install the fans to be able to push air through the radiator do You need put the fans upside down or You need to put the fans on the back
@directino I've moved them in different directions and tested temps and ended up have the bottom fans as intake. I didn't show that but I moved them. Thank you for watching.
I need help. I have ICE Chroma 240 ARGB Cooler. Pump has a 3 pin connector. But, My MOBO doesn't have any 3 Pin Pump header. Where do I connect that 3 Pin Pump Connector?
The Pump has 2 cables one connects to the mobo and the other connects to the RGB light control. The 3 pin connector probably connects to the rgb light control. good luck and keep me posted.
“The cpu fans connects right here” blurred poor visual shot not showing exactly where an over head shot using different motherboards would of been better
A B560 motherboard would be the best choice. A Z590 motherboard would also work, but would be more expensive and it's intended for overclocking. Good luck and keep me posted!
Query; default setup for motherboard CPU fan and Motherboard PUMP fan connection. Should AIO fans be daisy chained to CPU Fan, and Pump connection to Pump Fan? Or all connections daisy chained to CPU fan (as my thermaltake AIO seems to indicate. Thanks.
I got the 3 fan one and its not working on my mother bored its my first time ever building a pc but im clueless on connecting it all together what do i do
Your mobo might have a few different fan connections. Plug the pc case fan connection into a different one until you find one that works. Hope this helps. Thank you for watching I really appreciate it.
Im having an issue where the screws are nit big enough and my cpu water cooler is loose... im thinking of going to a hardware store and getting crews or bolts that have threads all the way up so i can secure the cooler.... it says my stuff should be compatible and im so annoyed.... im not using this wraith cooler anymore🤬
Way too busy a setup.. too many wires, too bulky, and most likely totally unnecessary. I've always used a CPU fan that comes direct with the CPU itself and my systems run fine for years and years. I've never understood these solutions looking for problems.
Been tempted to an AIO many times but never pulled the trigger and done it. Cant deny that your set up lights up like Vegas Strip ! Thanks for sharing, Mike. Appreciated as always
Lol! Thanks Bob! When in Vegas light it up!!!!
Your wiring explanation is bad. "Connect here"
Struggling with this cooler as well and looked up his motherboard legend, he plugs the first one at the bottom into the Chasis fan or CHA_FAN and the top which are the two radiator fans into the CPU_FAN
Watching from Yosemite Kentucky.
This helped so much with my build!!!! Thanks!
Glad to hear it! Thanks for watching!
@@UltimateTechHub wait how do You install the fans to be able to push air through the radiator do You need put the fans upside down or You need to put the fans on the back
@@programmerhackers1444 The exact way I installed it. The fans push air from inside the pc through the radiator out the top of the case.
I can’t for the life of me figure out where the wires go!
did you figure it out?
Yes I did! My case was just weird. It came with some rgb fans and it got confusing
@@killswitchengage0830yo I'm in that same boat right now, how did you end up doing it
what did you do different?
He did a horrible job explaining. Or rather, never explained. Thumb down.
Dude, i understand youre helping us out but when you said, this and that wire connects "RIGHT HERE".. Where is right here at?
I want to know about the wiring. My MSI coreliguid M240 radiator doesn't have electric cabling yet so many how-to videos clearly show cabling.
wiring explanation is what we need not installing cause its the most important not to mess with your motherboard
I have a controller but it doesn’t have the same connections that the wire needs ? Means it’s outdated and I need to change it?
What is the direction of fan, is it fit in exhaust position or intake position?
Either direction. I prefer exhaust position.
Aren't all your fans in the exhaust position? Isn't this considered a bad practice?
@directino I've moved them in different directions and tested temps and ended up have the bottom fans as intake. I didn't show that but I moved them. Thank you for watching.
@UltimateTechHub Yup, the case looks so much better with just exhaust fans but for the bottom fans intake is considered a must.
My brother installed my 240 aio and I went to msi center an I can’t change the color from red
when you mount it to the top does it act as exhaust/outake for the pc airflow ?
I mount it as exhaust since hot air rises. I usually mount the bottom fans as intake.
I need help. I have ICE Chroma 240 ARGB Cooler. Pump has a 3 pin connector. But, My MOBO doesn't have any 3 Pin Pump header. Where do I connect that 3 Pin Pump Connector?
The Pump has 2 cables one connects to the mobo and the other connects to the RGB light control. The 3 pin connector probably connects to the rgb light control. good luck and keep me posted.
My motherboard only has the cpu fan thing, not the pump, do I just connect it to the cpu fan?
@@thejgamer6050 Yes
“The cpu fans connects right here” blurred poor visual shot not showing exactly where an over head shot using different motherboards would of been better
The ports are labeled on the mobo, cpu fan plugs into the one marked "cpu fan" and the aio pump connect to the one labeled "aio pump"
I'm confused. Doesn't the two cables attached to the AIO pump supposed to be at the bottom? Here I see them at the right hand side?
I'm to old to trust Water & electricity 😲
But a great How to 👍
Thanks Bodie!
@@UltimateTechHub LEGEND !!!!!!!!!!!!!!
I have ant esports ice 360
And i5 11400f
Suggest me a motherboard
A B560 motherboard would be the best choice. A Z590 motherboard would also work, but would be more expensive and it's intended for overclocking. Good luck and keep me posted!
@@UltimateTechHub thanks
Query; default setup for motherboard CPU fan and Motherboard PUMP fan connection. Should AIO fans be daisy chained to CPU Fan, and Pump connection to Pump Fan? Or all connections daisy chained to CPU fan (as my thermaltake AIO seems to indicate. Thanks.
Connect to CPU fan connections not the Pump Fan. Good luck and keep me posted. Thank you for watching.
What kind of case was used on this build?
I got the 3 fan one and its not working on my mother bored its my first time ever building a pc but im clueless on connecting it all together what do i do
Your mobo might have a few different fan connections. Plug the pc case fan connection into a different one until you find one that works. Hope this helps. Thank you for watching I really appreciate it.
Need video for amd...
Im having an issue where the screws are nit big enough and my cpu water cooler is loose... im thinking of going to a hardware store and getting crews or bolts that have threads all the way up so i can secure the cooler.... it says my stuff should be compatible and im so annoyed.... im not using this wraith cooler anymore🤬
Of course getting the ones that fit into the backplate sized...
Do I have to remove my motherboard to add the bracket
@ashergee6717 probably not. Most pc cases have an opening to add the bracket.
So i dont connect to cpu_fan but to cpu pump?
Does it come with thermal paste?
Yes.
@@UltimateTechHubthanks man
What is a CPU pump???
Way too busy a setup.. too many wires, too bulky, and most likely totally unnecessary. I've always used a CPU fan that comes direct with the CPU itself and my systems run fine for years and years. I've never understood these solutions looking for problems.
Yes it is a bit busy but it is a powerful and effective cooling solution especially for high end gaming and 4k video editing! Thanks for watching!
How Can I change the color of the lights without controler?😢
You can't you need the controller.
Do u have to refill it after a while
No it's a closed loop system. Zero Maintenance.
@@UltimateTechHub thanks
what about the liquid coolant ???
This is a closed loop cooler. No coolant needs to be added ever.
It goes right here? Lol wtf u gottta be kidding me
What's TH-cam?
i cant listen to that pressing mouse at the end of every audio clips, bro, cut it
Great voice let’s hop you make better videos as this didn’t help anyone